Zobrazeno 1 - 10
of 50
pro vyhledávání: '"S. Ginocchio"'
Publikováno v:
Fuel Cells
Fuel Cells, Wiley-VCH Verlag, 2013, 13, pp.1146-1154. ⟨10.1002/fuce.201200230⟩
Fuel Cells, Wiley-VCH Verlag, 2013, 13, pp.1146-1154. ⟨10.1002/fuce.201200230⟩
Degradation and durability studies of the short side chain perfluorosulfonic acid ionomer membrane, Aquivion™, of Solvay Specialty Polymers, are described in a fuel cell operation beyond 100°C. Specific electrochemical accelerated stress tests und
Publikováno v:
Fuel Cells. 9:325-348
Single cell and 500 We stack integrating Celtec P1000 MEAs were operated in continuous mode at 0.4 A cm–2 and 160 °C, under simulated reformate and air. Single cell's ohmic resistivity was almost unaffected by 1,100 h of ageing but the cell progre
Publikováno v:
Journal of Power Sources. 182:469-475
Comparative studies of mechanical and electrochemical properties of Nafion ® - and sulfonated polyetheretherketone polymer-type membranes are carried out under severe fuel cell conditions required by industrials, within stationary and cycling electr
Autor:
S. Rampino, M. Bindi, Mario Rocca, Edmondo Gilioli, S. Zannella, S. Ginocchio, Andrea Gauzzi, M. Baldini
Publikováno v:
IEEE transactions on applied superconductivity
17 (2007): 3286–3289. doi:10.1109/TASC.2007.898932
info:cnr-pdr/source/autori:Rampino S. a; Gauzzi A. ab; Baldini M. c; Bindi M. c; Gilioli E. a; Ginocchio S. c; Rocca M. de; Zannella S. c/titolo:In situ oxidation of superconducting YBCO films by a supersonic O-2 beam/doi:10.1109%2FTASC.2007.898932/rivista:IEEE transactions on applied superconductivity (Print)/anno:2007/pagina_da:3286/pagina_a:3289/intervallo_pagine:3286–3289/volume:17
17 (2007): 3286–3289. doi:10.1109/TASC.2007.898932
info:cnr-pdr/source/autori:Rampino S. a; Gauzzi A. ab; Baldini M. c; Bindi M. c; Gilioli E. a; Ginocchio S. c; Rocca M. de; Zannella S. c/titolo:In situ oxidation of superconducting YBCO films by a supersonic O-2 beam/doi:10.1109%2FTASC.2007.898932/rivista:IEEE transactions on applied superconductivity (Print)/anno:2007/pagina_da:3286/pagina_a:3289/intervallo_pagine:3286–3289/volume:17
We report on the successful implementation of a supersonic molecular oxygen (O 2) beam for the in situ oxidation of superconducting YBCO films. The beam is produced by a specially designed array of conical nozzles that were laser machined in a platin
Publikováno v:
IEEE Transactions on Applied Superconductivity. 17:2224-2227
Today the Bi-2223 tape represents a suitable candidate for the use in various HTS devices. The LHC current leads use Bi-2223 tapes soldered together in short lengths, forming stacks of rugged HTS conductors. Critical current and AC loss measurements
Publikováno v:
Journal of Physics: Conference Series. 43:219-222
Modelling and design of superconducting fault current limiters (SFCL) requires accurate prediction of current-voltage behaviour and thermal response of HTS tapes carrying electrical current over Ic, since these characteristics affect the electrical b
Publikováno v:
IEEE Transactions on Appiled Superconductivity. 15:2847-2850
Technical and economical assessments for future power applications of High T/sub c/ superconductivity require the evaluation and comparison of AC losses in first and second generation high T/sub c/ tapes. An electrical and a thermometric method were
Autor:
S. Ginocchio, F. Bolzoni, M. Bindi, B. Holzapfel, Andrea Gauzzi, S. Zannella, Alberto Baldini, L. Gianni
Publikováno v:
IEEE Transactions on Appiled Superconductivity. 15:2628-2631
By using a simple single-pass reel-to-reel system, we demonstrate a simple and robust in-situ route for the continuous deposition of 1-2 m long Coated Conductors (CC) consisting of 1 /spl mu/m thick superconducting YBa/sub 2/Cu/sub 3/O/sub 7/ (YBCO)
Autor:
A. Matrone, Roberto Gerbaldo, S. Raineri, S. Ginocchio, R. Quarantiello, Danilo Botta, Giovanni Giunchi, Bruno Minetti
Publikováno v:
IEEE Transactions on Appiled Superconductivity. 15:3230-3233
The bulk MgB/sub 2/ material shows very promising characteristics to be applied in many AC devices, i.e. as electric motors, as magnetic field screening apparatus or as variable inductor or resistor for Fault Current Limitation. In all these cases th
Autor:
R. Tebano, S. Zannella, I. Baldi, L. Gianni, S. Ginocchio, S. Spreafico, L. Rognoni, A. Citino
Publikováno v:
International Journal of Modern Physics B. 17:966-971
For power applications of HTS it is crucial to predict their AC losses in the typical operating conditions. We report measurements of energy losses in Bi-2223 multifilamentary tapes carrying AC currents and exposed to AC magnetic fields oriented perp