Zobrazeno 1 - 10
of 41
pro vyhledávání: '"S. G. Sandomirskii"'
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 1, Pp 44-49 (2020)
Evaluation of applicability of 20MnCrS5 steel for gears of transmissions of mobile machines, manufactured according to European standard EN 10084 was carried out. Experimental and virtual simulation of hardenability of the steel according to the upda
Externí odkaz:
https://doaj.org/article/9167a1c4ebf64a89a2c34533210194e5
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 1, Pp 65-73 (2020)
The problem of the formation of cracks and the conditions of their origin in the cast of metal products have been widely studied in world practice, but the real mechanism of this process is not yet clear enough that it could be applied in production.
Externí odkaz:
https://doaj.org/article/db8ad108da184037993157b414c16f84
Autor:
S. G. Sandomirskii
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 2, Pp 40-45 (2017)
The analysis of ranges of possible change of temporary resistance of sB of castings from ductile and gray cast iron is carried out. The analytical description of ranges of change of sВ depending on casting BH hardness is developed. It is shown that
Externí odkaz:
https://doaj.org/article/6674f9df5c6f4a5181d2d499354a66b6
Publikováno v:
Litʹë i Metallurgiâ, Vol 0, Iss 1, Pp 65-73 (2020)
The problem of the formation of cracks and the conditions of their origin in the cast of metal products have been widely studied in world practice, but the real mechanism of this process is not yet clear enough that it could be applied in production.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::fa2b8ae0b24e1f41ab45e040afa45827
https://lim.bntu.by/jour/article/view/3185
https://lim.bntu.by/jour/article/view/3185
Publikováno v:
THE 2ND INTERNATIONAL CONFERENCE ON PHYSICAL INSTRUMENTATION AND ADVANCED MATERIALS 2019.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6a7966daa62bafc4ef26a21a50744fce
https://doi.org/10.1063/5.0032978
https://doi.org/10.1063/5.0032978
Publikováno v:
Russian Journal of Nondestructive Testing. 54:776-783
It has been shown both theoretically and experimentally that as the tempering temperature of quenched low-carbon steels increases up 600–650°C, the values of induction on the asymmetric “coercive return–magnetization” cycle decrease monotoni
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ab757f9f6ff5bb52fa62ec3af9daddea
https://doi.org/10.1134/s1061830918110050
https://doi.org/10.1134/s1061830918110050
Autor:
S. G. Sandomirskii
Publikováno v:
Steel in Translation. 48:330-334
The mechanical properties (strength σu, yield point σ0.2, relative elongation ψ; and hardness HB and HRC) of 40X steel depend monotonically on the tempering temperature Tte after quenching and are closely correlated. Their relationships are descri
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::aff79fc5dfe5b6da2446279347515f02
https://doi.org/10.3103/s0967091218050078
https://doi.org/10.3103/s0967091218050078
Autor:
S. G. Sandomirskii
Publikováno v:
Russian Electrical Engineering. 89:199-203
An interrelation is shown to be valid and grounded between the density of specific magnetic-hysteresis loss Wh and of steels measured over minor magnetic-hysteresis loops under magnetization reversal, as well as technical saturation magnetization Ms,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b308b827b25a8bdfcd78390054315342
https://doi.org/10.3103/s1068371218030148
https://doi.org/10.3103/s1068371218030148
Autor:
S. G. Sandomirskii
Publikováno v:
Russian Metallurgy (Metally). 2017:989-993
A formula is derived to accurately describe the tabulated relation between the Brinell (HB) and Vickers (HV) hardnesses of steel over the entire range of their possible variation. This formula and the formulas describing the relation between the HB h
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b5989474d12199d9f843da6ac0c4ad8c
https://doi.org/10.1134/s003602951711012x
https://doi.org/10.1134/s003602951711012x
Autor:
S. G. Sandomirskii
Publikováno v:
Measurement Techniques. 60:177-182
A formula has been derived for calculating the main magnetization curve of steels from the strength of the magnetizing field and the measurement results of the magnetization of technical saturation, coercive force, and residual magnetization. We anal
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::42c894a53395d806795b27985964da7b
https://doi.org/10.1007/s11018-017-1170-y
https://doi.org/10.1007/s11018-017-1170-y