Zobrazeno 1 - 10
of 99
pro vyhledávání: '"S. Boczkal"'
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 69, Iss No 3, Pp 1061-1069 (2024)
The main assumption of the conducted research was the selection of appropriate heat treatment parameters to obtain the best possible resistance to stress corrosion cracking (SCC) and the highest strength properties of the extruded profiles. The work
Externí odkaz:
https://doaj.org/article/e1a15844d3e1470fad933e18bf45c6df
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 68, Iss No 1, Pp 295-306 (2023)
Mating electrodes made of copper alloys are commonly used for welding galvanized steel sheets used in the production of car bodies. These alloys are characterized by high mechanical properties, a high level of electrical and thermal conductivity as w
Externí odkaz:
https://doaj.org/article/657df4fd55594bff9ea85472c2184500
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 67, Iss No 1, Pp 303-309 (2022)
The effect of 0.2% addition of Mg, Co and Ce to 99.9% cast aluminium was studied by evaluation of changes in microstructure and mechanical properties. The microstructure was analyzed by scanning electron microscopy and transmission electron microscop
Externí odkaz:
https://doaj.org/article/cd03ea54b8da4914bda03e82052c12f9
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 65, Iss No 2, Pp 935-940 (2020)
The paper presents the results of the electrodeposition of nickel composite coatings reinforced with the nano size SiC ceramic particles. The type and size of the ceramic particles or organic additives used play a important role during electrodeposit
Externí odkaz:
https://doaj.org/article/9359d080f04245cfb1af9170f5a5ea85
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 65, Iss No 1, Pp 185-192 (2020)
The article presents research aimed at determining the effect of adding rare earth elements to near-eutectic Al-Si and Al-Si-Ni alloys on the microstructure and mechanical properties of the obtained products. Material for the research was prepared us
Externí odkaz:
https://doaj.org/article/24735d2754cf492caefca3d4339347af
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 64, Iss No 4, Pp 1327-1333 (2019)
The paper presents the results of the electrodeposition of nickel composite coatings reinforced with the ceramic SiC particles. A Watts type galvanic bath modified with various organic additives was used. These additives were: 2-sulfobenzoic acid imi
Externí odkaz:
https://doaj.org/article/06e387194ecc445db47b6ffea137480e
Application of X-Ray Diffraction to Analyse Phase Composition of Aluminium Alloysfor Plastic Working
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 64, Iss No 4, Pp 1315-1319 (2019)
An attempt was made to determine phase composition of commercial aluminium alloys using X-ray diffraction. Samples for phase composition analysis were selected from the group of aluminium alloys covered by the EN 573-3:2013 standard [1]. Representati
Externí odkaz:
https://doaj.org/article/d2731bdc75e843d290a2f6fe4f0944f2
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 64, Iss No 3, Pp 997-1004 (2019)
The effect of plastic deformation process on the dissolution rate of biocompatible Mg alloys was investigated. Two biocompatible MgLi1Ca0,2Zn1 and MgLi1Ca1Zn1 alloys were selected for the study. The alloys were deformed on a 100T press at a temperatu
Externí odkaz:
https://doaj.org/article/0ee2e0854e2643b784f93af0231cbf58
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.