Zobrazeno 1 - 10
of 30
pro vyhledávání: '"S. A. Impey"'
Autor:
S. A. Impey, James Beck, Stephen Hobbs, Ian Holbrough, Adrianus I. Aria, Jennifer Kingston, Zaria Serfontein
Publikováno v:
Acta Astronautica. 195:540-546
Spacecraft in low-Earth orbit are exposed to environmental threats which can lead to material degradation and component failures. The presence of atomic oxygen and collisions from orbital debris have detrimental effects on the structures, thus affect
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3dee239850a112795cd29515b10e7c76
https://doi.org/10.1016/j.actaastro.2021.06.009
https://doi.org/10.1016/j.actaastro.2021.06.009
Autor:
S. Bursich, Katrin Jahns, John Nicholls, S. A. Impey, J. Salime, K. Balinski, Jürgen Wübbelmann, Christine Chalk, Ulrich Krupp, M. Schroth
Publikováno v:
Materials at High Temperatures. 35:89-96
The possibility of creating an oxidation-protection layer system composed of Fe, Ni and Cr on top of a plain carbon steel substrate by means of electroplating is investigated within this study. It is shown that by applying an appropriate heat treatme
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c544451e442143f5fa6b309f2074c425
https://doi.org/10.1080/09603409.2018.1435203
https://doi.org/10.1080/09603409.2018.1435203
Publikováno v:
Journal of The Electrochemical Society. 165:D402-D410
Nickel-matrix composite coatings with tungsten carbide particles were produced by brush electroplating using different current densities and materials of the brush. Non-abrasive materials and high current densities produce coatings with high particle
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::13465543bc0c4f23eb77206044612dd7
https://doi.org/10.1149/2.1161809jes
https://doi.org/10.1149/2.1161809jes
Publikováno v:
Key Engineering Materials. 644:96-100
Automotive exhaust gas temperature sensors are fitted to monitor the performance of a vehicle emission control system. The aggressive working environment is a big challenge in sensor design. This paper introduces an FEA simulation model developed to
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fbf435372a6bab16cb9257d99b685de3
https://doi.org/10.4028/www.scientific.net/kem.644.96
https://doi.org/10.4028/www.scientific.net/kem.644.96
Publikováno v:
Scientific Reports
This work studies the deposition of aluminium-incorporated nickel coatings by brush electroplating, focusing on the electroplating setup and processing parameters. The setup was optimised in order to increase the volume of particle incorporation. The
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::19adf71c1e6572fd97f11378ada27eb5
https://dspace.lib.cranfield.ac.uk/handle/1826/11660
https://dspace.lib.cranfield.ac.uk/handle/1826/11660
Publikováno v:
Desalination and Water Treatment. 52:4612-4621
Samples of polishing effluent produced during infrared optics manufacture were analyzed. Their particle size, composition, Zeta potential, chemical oxygen demand (COD), total suspended solids (TSS), and settleable solids were determined. Feasibility
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::71b3077c532db1770390ae6b5df5f327
https://doi.org/10.1080/19443994.2014.881750
https://doi.org/10.1080/19443994.2014.881750
Publikováno v:
All Days.
Preferential weld corrosion (PWC) remains a major operational challenge that jeopardizes the integrity of oil and gas carbon steel pipelines. Corrosion inhibition is conventionally used to mitigate this problem however several indications suggest tha
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5f830559f42f08d2dbe4bcce3ebeb8ce
https://doi.org/10.2118/184380-ms
https://doi.org/10.2118/184380-ms
Autor:
A. Duval, Monika Saumer, K. Bedner, Heather Almond, S. A. Impey, B. Courtot, M. Cabeza, D.M. Allen
Publikováno v:
Microsystem Technologies. 15:1287-1291
The objective of this research was to study the influence of electroplating parameters on electrodeposit characteristics for the production of nickel (Ni) and nickel–iron (Ni–Fe) microparts by photoelectroforming. The research focused on the most
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6fee4435c8fc5f4740946e1a1f19c1e9
https://doi.org/10.1007/s00542-008-0717-x
https://doi.org/10.1007/s00542-008-0717-x
Publikováno v:
CIRP Annals. 54:187-190
During the fabrication of stainless steel parts by photochemical machining (PCM), a seemingly random occurrence of a partially-adherent, brown/black deposit, known as smut, can occur. This quality problem has plagued the PCM industry for over 30 year
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6a0b8b97cbe51998466a559ab943e36a
https://doi.org/10.1016/s0007-8506(07)60080-8
https://doi.org/10.1016/s0007-8506(07)60080-8
Publikováno v:
Surface and Coatings Technology. :79-84
Previous studies on the erosion of electron beam physical vapour deposited thermal barrier coatings (EB PVD TBCs) has shown that aging the coatings at between 1100 and 1500 à °C before erosion increases the erosion rate. These changes in the eros
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d540ae28a720c4fcc05ffb0b4f7c0eba
https://doi.org/10.1016/j.surfcoat.2004.08.018
https://doi.org/10.1016/j.surfcoat.2004.08.018