Zobrazeno 1 - 10
of 165
pro vyhledávání: '"Süleyman Gündüz"'
Autor:
Recep Koyuncu
Publikováno v:
Marife Dini Araştırmalar Dergisi, Vol 13, Iss 2 (2013)
Externí odkaz:
https://doaj.org/article/3c84b3c6b6ff4063b370f8a8fa1c0fdd
Autor:
Koyuncu, Recep
Publikováno v:
Marife Dini Araştırmalar Dergisi, Vol 13, Iss 2 (2013)
https://www.marife.org/marife/article/view/677
Atıf / Cite as: Koyuncu, Recep. "Tarih ve Dilbilimi Kaynakları Işığında Kur'ân'ın 10 Kıraati, Ahmed Aliyyul İmam (Çev: Süleyman Gündüz)". Marife 13/2 (2013): 221-223. https://doi.org/1
Atıf / Cite as: Koyuncu, Recep. "Tarih ve Dilbilimi Kaynakları Işığında Kur'ân'ın 10 Kıraati, Ahmed Aliyyul İmam (Çev: Süleyman Gündüz)". Marife 13/2 (2013): 221-223. https://doi.org/1
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::52c8e19f5a71192f14f3320138a9c03a
Publikováno v:
Science of Sintering. 55:45-56
In this work, AISI 4340 steel was produced by powder metallurgy. Samples were sintered at 1150?C for 90 min. and then cooled in the furnace. Except to those in the as-sintered condition, one of the produced samples was homogenized at 1150?C for 1 h a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b2d0cc14035edb9bf23fb99b5ccd7e05
https://doi.org/10.2298/sos2301045y
https://doi.org/10.2298/sos2301045y
Publikováno v:
Materials Testing. 64:1136-1149
In this work, high-strength low-alloy (HSLA) steel with 0.22 wt% carbon was produced in laboratory scale and hot rolled with a total deformation of 42% via 4, 5, or 6 passes. After multipass hot rolling process, samples were examined either in as-rol
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::594a529147cca3920625da849104ea2b
https://doi.org/10.1515/mt-2021-2220
https://doi.org/10.1515/mt-2021-2220
Publikováno v:
Volume: 35, Issue: 2 606-616
Gazi University Journal of Science
Gazi University Journal of Science
One of the most important properties of microalloyed steels is the different microstructures which are obtained by changing the thermomechanical processing parameters and steel composition. The control of microstructure such as grain size, precipitat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::bd8abe71f970ca93b8d7207925ba9ba6
https://doi.org/10.35378/gujs.835371
https://doi.org/10.35378/gujs.835371
Publikováno v:
Science of Sintering. 54:153-167
In this work, the effect of Cu content on the microstructures, mechanical properties and electrical conductivity of Nb-V added microalloyed powder metallurgy (PM) steels were investigated. Microalloyed steel samples were pressed at 750 MPa and sinter
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6e56cc9868a6b8f37451d9c049d8232b
https://doi.org/10.2298/sos2202153e
https://doi.org/10.2298/sos2202153e
Autor:
Demet Taştemur, Süleyman Gündüz
Publikováno v:
Materials Research, Vol 21, Iss 1 (2017)
Dynamic strain aging (DSA) behaviour of hot work tool steel (H10) was investigated under as- received (AR) and as-quenched (AQ) conditions. Hot tensile test was carried out in the temperatures of 25°C-700°C at a strain rate of 1x10-3s-1. The tensil
Externí odkaz:
https://doaj.org/article/088168145b2040fdb5da9b6b02cc638b
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 21, Iss 1, Pp 11-14 (2015)
In this study, the effect of cooling rate on microstructure and mechanical properties of Al-Mg-Si (6063) alloys was investigated. In order to obtain different cooling rate, samples heat treated at 520 oC for 2 h and then cooled in furnace, sand, air,
Externí odkaz:
https://doaj.org/article/e13f8d8252fa45e3914a7963fd4ec13a
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 21, Iss 1, Pp 11-14 (2015)
Bu çalışmada, soğuma hızının Al-Mg-Si (6063) alaşımından elde edilen numunelerin mikroyapı ve mekanik özelliklerine etkisi deneysel olarak araştırılmıştır. Farklı soğuma hızı elde edebilmek için numuneler 520 °C’de 2 saat so
Externí odkaz:
https://doaj.org/article/6c509cbdd3a44eceb0250dff974462df