Zobrazeno 1 - 10
of 157
pro vyhledávání: '"Roni Z Shneck"'
Autor:
Daniel Shtuckmeyster, Nitzan Maman, Moshe Vaknin, Gabriel Zamir, Victor Y. Zenou, Ulrich Kentsch, Itzchak Dahan, Roni Z. Shneck
Publikováno v:
Metals, Vol 14, Iss 3, p 260 (2024)
The factors that influence the formation of helium blisters in copper were studied, including crystallographic grain orientation and thermomechanical conditions. Helium implantation experiments were conducted at 40 KeV with a dose of 5 × 1017 ions/c
Externí odkaz:
https://doaj.org/article/5395760ad1764621ac7e94b79f27e4d1
Publikováno v:
Inorganics, Vol 11, Iss 6, p 228 (2023)
This study aims to shed light on the unusual trend in the stabilities of Zr(MoxFe1−x)2, 0 ≤ x ≤ 1, hydrides. Both the rule of reversed stability and the crystal volume criterion correlate with the increased hydride stabilities from x = 0 to x =
Externí odkaz:
https://doaj.org/article/6278e52dc6c648529d55b46fa344692a
Publikováno v:
Energies, Vol 16, Iss 9, p 3774 (2023)
Submicron-structured films of thermoelectric materials, exhibiting an improved thermoelectric figure of merit, are reviewed, including methods of fabrication and characterization. The review emphasizes the beneficial role of the grain boundaries in p
Externí odkaz:
https://doaj.org/article/d38a7d3a519a486ca43246a86221790f
Autor:
Avihai Petel, Ales Jager, Dotan Babai, Juergen Jopp, Arie Bussiba, Mordechai Perl, Roni Z. Shneck
Publikováno v:
Metals, Vol 13, Iss 4, p 790 (2023)
Short fatigue cracks in polycrystalline materials are very important from both practical and basic aspects, yet they are very difficult to observe. Therefore, it is suggested to emulate some properties of short cracks with long fatigue cracks in mono
Externí odkaz:
https://doaj.org/article/ce18fd3cca134adda00fc29ead46b1dc
Publikováno v:
Energies, Vol 16, Iss 7, p 3036 (2023)
Thermoelectric devices may have an essential role in the development of fuel-saving, environmentallyfriendly, and cost-effective energy sources for power generation based on the direct conversion of heat into electrical energy. A wide usage of thermo
Externí odkaz:
https://doaj.org/article/9cb2a69a0a3242bcb5ff33df89a7e4e3
Autor:
Roman I. Bogdanov, Yaakov B. Unigovski, Emmanuel M. Gutman, Iliya V. Ryakhovskikh, Roni Z. Shneck
Publikováno v:
AIMS Materials Science, Vol 6, Iss 6, Pp 1065-1085 (2019)
The review presents brief theoretical foundations of the mechanochemical and chemomechanical surface effects (MCE and CME) associated with corrosion-mechanical destruction of metals, considers the results of various scientific publications that studi
Externí odkaz:
https://doaj.org/article/f9dd76c61b554ea4ab4747a288d691a3
Publikováno v:
Philosophical Magazine. :1-32
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::729aa6632790cfae2ebb526b886038f9
https://doi.org/10.1080/14786435.2023.2197299
https://doi.org/10.1080/14786435.2023.2197299
Autor:
Zinovi Dashevsky, Albert Jarashneli, Yaakov Unigovski, Bohdan Dzunzda, Feng Gao, Roni Z. Shneck
Publikováno v:
Energies, Vol 15, Iss 11, p 3960 (2022)
A huge concern regarding global warming, as well as the depletion of natural fuel resources, has led to a wide search for alternative energy sources. Due to their high reliability and long operation time, thermoelectric generators are of significant
Externí odkaz:
https://doaj.org/article/5e2696fcbae14113a419ebee127c891f
Autor:
Dong Zhao, Emmanuel M. Gutman, Roni Z. Shneck, Feng Ye, Binbin Liu, Yaakov B. Unigovski, Haoyang Du
Publikováno v:
International Journal of Minerals, Metallurgy and Materials. 29:2072-2078
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::40781b7afa8d7c3780d0b90a4172b074
https://doi.org/10.1007/s12613-021-2356-5
https://doi.org/10.1007/s12613-021-2356-5
Autor:
Yaron Itay Ganor, Eitan Tiferet, Sven C. Vogel, Donald W. Brown, Michael Chonin, Asaf Pesach, Amir Hajaj, Andrey Garkun, Shmuel Samuha, Roni Z. Shneck, Ori Yeheskel
Publikováno v:
Materials, Vol 14, Iss 3, p 658 (2021)
Additively-manufactured Ti-6Al-4V (Ti64) exhibits high strength but in some cases inferior elongation to those of conventionally manufactured materials. Post-processing of additively manufactured Ti64 components is investigated to modify the mechanic
Externí odkaz:
https://doaj.org/article/0ae537ed3e8b42238d47206694dc5f45