Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Rongbiao Wang"'
Publikováno v:
Sensors, Vol 22, Iss 9, p 3587 (2022)
Magnetic flux leakage (MFL) testing is widely used in non-destructive testing of ferromagnetic components. In view of the serious attenuation of the leakage magnetic field (LMF) caused by the transmission of LMF in the lift-off layer between the meas
Externí odkaz:
https://doaj.org/article/a3e5b635bb244e469add4a484ccd325e
Most of the aircraft skin is assembled by riveted structural parts, and the riveted holes are prone to cracks due to stress concentration, so it is urgent to carry out non-destructive testing research on aircraft riveted components. In this paper, a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5c8740ed50f64407355f9375bfed9845
https://doi.org/10.21203/rs.3.rs-2896972/v1
https://doi.org/10.21203/rs.3.rs-2896972/v1
Publikováno v:
Journal of Nondestructive Evaluation. 42
Publikováno v:
Measurement Science and Technology. 34:085123
Thick-walled steel pipes, which bear high internal pressure, are widely applied in nuclear power and pressure pipelines. If there are defects in the inner wall, they are easy to expand and cause accidents. Therefore, the thick-walled steel pipe must
Publikováno v:
International Journal of Applied Electromagnetics and Mechanics. 64:493-500
As a high-sensitivity magnetic sensor, the magnetic head has been gradually applied to non-destructive testing. Compared with the single coil and the coil with an iron core, the magnetic core can converge the weak leakage magnetic field because it ca
Publikováno v:
International Journal of Applied Electromagnetics and Mechanics. 64:501-508
Magnetic flux leakage (MFL) testing is widely applied in the online detection of steel pipes. Different magnetizing directions are required for the detection of defects in different directions. As the speed of online MFL testing increases, the motion
Publikováno v:
Journal of Nondestructive Evaluation. 39
The flexible printed coil array (FPC) is employed extensively because of its flexibility in non-destructive testing (NDT). To make the inductive coil detect both external and internal defects under static conditions in magnetic flux leakage testing (
Publikováno v:
Sensors and Actuators A: Physical. 332:113091
In conventional magnetic flux leakage (MFL) detection, a lift-off layer based on air or non-ferromagnetic wear-resistant material is employed to prevent magnetic sensors from wearing. However, the increase of the lift-off will lower the detection sen
Publikováno v:
Journal of Nondestructive Evaluation. 36
It is difficult for traditional magnetic flux leakage (MFL) methods to detect inner surface cracks of thick-walled steel pipe or plate due to magnetic shielding of the wall and strong magnetic background noise, and for eddy current testing (ECT) as w
Autor:
Rongbiao Wang
Publikováno v:
Frontiers of Chemical Science and Engineering. 12:327-328