Zobrazeno 1 - 10
of 42
pro vyhledávání: '"Ron A.J. van Ostayen"'
Publikováno v:
Results in Engineering, Vol 10, Iss , Pp 100200- (2021)
The novel contribution of this research is insight into the influence of different parameters in the magnet configurations on the load and stiffness of a ferrofluid pressure bearing. It is shown that magnets with a small cross-section magnetized alte
Externí odkaz:
https://doaj.org/article/d3a84784e28f426481feff42de5a73d1
Publikováno v:
Journal of Mechanical Design. :1-12
Compliant joints have significant advantages compared to rigid-body hinges due to a monolithic design and the absence of friction, which prevents effects like wear, backlash and stick-slip behaviour. However, the loading capability is often limited a
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 237:1276-1288
This paper presents the development of a contactless sensing system and the dynamic evaluation of an air-bearing based precision wafer positioning system. The contactless positioning stage is a response to the trend seen in the high-tech industry, wh
Autor:
Joep Nijssen, Ron A.J. van Ostayen
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235:8013-8024
In tribotronic bearing design active components are used to adapt bearing performance to operating conditions. The principle of self-adaptive bearings has also been presented in literature in which a passive modification of geometry was used for a va
Publikováno v:
Sealing Technology. 2021:4-9
Ferrofluid can be used effectively as a liquid seal for rotary shafts to seal off gasses. However, this technology tends to be less effective when sealing off a liquid. In such applications, one major problem is the degradation of the fluid when it c
Publikováno v:
Precision Engineering, 67
The objective of this research is to demonstrate the capability of a long stroke linear ferrofluid (FF) stage. This stage is a passive alternative to existing linear aerostatic stages and can be used in low loaded CNC devices, pick and place machines
Autor:
Ali Amoozandeh Nobaveh, Giuseppe Radaelli, Werner W.P.J. van de Sande, Ron A.J. van Ostayen, Just L. Herder
Publikováno v:
International Journal of Mechanical Sciences, 234
Compliant mechanisms (CM) with adaptive stiffness have been widely used in robotics and machine design applications. This paper proposes adapting the endpoint stiffness of a spatially curved compliant beam using a movable torsional stiffener and a ne
Publikováno v:
Advances in Mechanism Design III ISBN: 9783030835934
Vibrations are a promising source for powering wireless sensors, for example in low-frequency environments like human motion. These environments suffer from unpredictable vibration spectra and their low-frequency and large amplitude characteristics o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::fc2661e1b593e9fb447a573de84f508d
https://doi.org/10.1007/978-3-030-83594-1_14
https://doi.org/10.1007/978-3-030-83594-1_14
Publikováno v:
Results in Engineering, Vol 10, Iss, Pp 100200-(2021)
Results in Engineering, 10
Results in Engineering, 10
The novel contribution of this research is insight into the influence of different parameters in the magnet configurations on the load and stiffness of a ferrofluid pressure bearing. It is shown that magnets with a small cross-section magnetized alte
Publikováno v:
Journal of Intelligent Material Systems and Structures. 30:3056-3065
Using a smart fluid, for example, magnetorheological or electrorheological, in a hydrostatic bearing gives the possibility to actively change the bearing properties during operation. This work presents an analytical model to predict the load and stif