Zobrazeno 1 - 10
of 155
pro vyhledávání: '"Robert Ruh"'
Publikováno v:
Journal of the American Ceramic Society. 67:34-38
Twenty-one elements were screened for solubility in selected titanium-carbide compositions at 1600°C. Tin, lead, and aluminum were found to dissolve to an appreciable extent only in carbide compositions very near the titanium-titanium carbide phase
Publikováno v:
Journal of the American Ceramic Society. 79:2767-2770
The thermal diffusivity of mullite-ZrO{sub 2}-SiC{sub w} materials was determined from 25 to 1,000 C for composites in which the ZrO{sub 2} had different amounts of monoclinic and tetragonal phase, and varying SiC{sub w} content. At 25 C the thermal
Publikováno v:
Journal of the American Ceramic Society. 80:903-908
The flexural strength and elastic modulus of cubic zirconia that was stabilized with 6.5 mol% yttria was determined in the temperature range of 25°–1500°C in air. Specimens were diamond machined from both hot-pressed and sintered billets that wer
Publikováno v:
Journal of the American Ceramic Society. 82:2833-2840
The oxidation of SiC whiskers, contained in alkoxide-derived mullite-based matrices and exposed in air at 1000--1350 C for up to 1000 h, has been studied by analytical TEM, high-resolution SEM, and XRD. Silicon carbide whiskers were effectively prote
Publikováno v:
ResearcherID
Scopus-Elsevier
Scopus-Elsevier
The McLachlan equation, which incorporates both effective medium models and percolation, was used to predict the volume fraction-conductivity relationships of insulator-conductor composites, and results were compared with experimental data. Two compo
Publikováno v:
ResearcherID
In this third paper of the series, we discuss the electrical resistivity of BN-B 4 C composites with compositions ranging from 0% to 100% B 4 C. After establishing the response of samples whose compositions lie far away from the percolation region, w
Publikováno v:
Journal of the American Ceramic Society. 85:933-940
Nanophase-structured composites were fabricated by heat treating hot-pressed 2H-wurtzite SiC-AlN solid-solution specimens of 25, 50, and 75 mol% AlN within the spinodal decomposition zone. Heat-treatment conditions were 1750°C for 150 h, in flowing
Publikováno v:
Journal of the American Ceramic Society. 83:1797-1803
A composite consisting of 30 wt% SiC whiskers and a mullite-based matrix (mullite-32.4 wt% ZrO 2 -2.2 wt% MgO) was isothermally exposed in air at 1000°-1350°C, for up to 1000 h. Microstructural evolution in the oxidized samples was investigated usi
Autor:
Rosario A. Gerhardt, Robert Ruh
Publikováno v:
Journal of the American Ceramic Society. 84:2328-2334
The electrical behavior of hot-pressed mullite composites reinforced with 10, 20, and 30% SiC whiskers (SiCw) was evaluated in the frequency range 100 Hz–10 MHz and compared with 2 GHz data as well as dc resistivity measurements. It is found that t
Publikováno v:
Journal of the American Ceramic Society. 82:2481-2489
A series of SiC-AlN compositions of 0, 10, 25, 50, 75, 90, and 100 mol% AlN were hot pressed at 2100°C for a 1 h soak at a pressure of 35 MPa under vacuum. 2H-wurtzite SiC-AlN solid-solution structures were formed for compositions with 25-100 mol% A