Zobrazeno 1 - 10
of 16
pro vyhledávání: '"Rika Dwi Hidayatul Qoryah"'
Publikováno v:
Rekayasa Mesin, Vol 12, Iss 2, Pp 401-409 (2021)
The cutting force that reacts to cutting tool and workpieces will result deflection. Deflection is the cause of product deviation and vibration sources that can shorten the life of the cutting tool. Simulation of machining process is carried out to g
Externí odkaz:
https://doaj.org/article/a62579ab2cb84213a4c63d7caeb1fe6f
Publikováno v:
Teknik, Vol 41, Iss 3, Pp 261-268 (2020)
This study aims to observe the tool deterioration following application of minimum quantity lubrication method (MQL). The designed MQL system is completed with an Arduino controller system which was able to be either manually-controlled or automatica
Externí odkaz:
https://doaj.org/article/6fbda72409074d1d948a011f0f2601c1
Publikováno v:
Rekayasa, Vol 13, Iss 2, Pp 125-129 (2020)
Sebuah alat kendali semprotan cutting fluid pada minimum quantity lubrication (MQL) telah berhasil dibuat. Alat yang bekerja dengan sistem Arduino ini dihubungkan dengan sensor suhu yang diletakkan pada sisi pahat dan berhasil mengendalikan kapan cut
Externí odkaz:
https://doaj.org/article/0569531d548e41d6bad6e2da456f8c64
Publikováno v:
Journal of Mechanical Engineering Science and Technology, Vol 3, Iss 2, Pp 88-95 (2019)
The car chassis as a skeleton supports all loads and is the most important component. Car chassis requirements must be rigid, twisting resistant, vibration resistant and resistant to fatigue. This study aims to find the cause of the failure of the Ti
Externí odkaz:
https://doaj.org/article/8faaccfd5eaf4ab8a5076ea72e13f85e
Publikováno v:
Emitter: International Journal of Engineering Technology, Vol 8, Iss 1 (2020)
The cutting fluid is one of the essential factors in machining to increase machinability. The issuance of ISO 14000 about reducing the use of cutting fluid for its danger for operator and environment has encouraged many researchers to find ways to mi
Externí odkaz:
https://doaj.org/article/ab1d573722304edfb946eb8918929bb3
Autor:
Santoso Mulyadi, Muh Nurkoyim Kustanto, Cahya Alief Prasetyo, Gaguk Jatisukamto, Rika Dwi Hidayatul Qoryah, Yuni Hermawan, Mahros Darsin
Publikováno v:
ELEMEN : JURNAL TEKNIK MESIN. 9:24-30
Mobil listrik merupakan kendaraan yang digerakkan oleh motor listrik, motor listrik memperoleh daya dari listrik yang tersimpan pada baterai. Chassis merupakan komponen yang penting pada mobil listrik. Chassis merupakan bagian dari mobil listrik yang
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::61fd19f1890a0e1ece6fbb7911feae2e
https://doi.org/10.34128/je.v9i1.189
https://doi.org/10.34128/je.v9i1.189
Autor:
Sumarji, R.A. Ilyas, A. Atiqah, Mochamad Asrofi, Asnawi, Hubby Mukaffa, Yuni Hermawan, S.M. Sapuan, Sujito, Rika Dwi Hidayatul Qoryah
Publikováno v:
Materials Today: Proceedings. 48:761-765
In this work, biocomposites based polylactic acid (PLA) filled with piper betle fiber (PBF) were successfully synthesized by solvent cast-film method using chloroform as the solvent. The PBF was treated with 7% NaOH. The biocomposites were loaded sep
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c96afc2d8ceaaea4c6cd47c13ed88036
https://doi.org/10.1016/j.matpr.2021.02.218
https://doi.org/10.1016/j.matpr.2021.02.218
Publikováno v:
Rekayasa Mesin, Vol 12, Iss 2, Pp 401-409 (2021)
The cutting force that reacts to cutting tool and workpieces will result deflection. Deflection is the cause of product deviation and vibration sources that can shorten the life of the cutting tool. Simulation of machining process is carried out to g
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::39be675c41f8a0cbe6f336dadc7e888e
https://doi.org/10.21776/ub.jrm.2021.012.02.17
https://doi.org/10.21776/ub.jrm.2021.012.02.17
Publikováno v:
Rekayasa, Vol 13, Iss 2, Pp 125-129 (2020)
Sebuah alat kendali semprotan cutting fluid pada minimum quantity lubrication (MQL) telah berhasil dibuat. Alat yang bekerja dengan sistem Arduino ini dihubungkan dengan sensor suhu yang diletakkan pada sisi pahat dan berhasil mengendalikan kapan cut
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::fbcff073414f96c6e010853c47e3fcd0
https://doi.org/10.21107/rekayasa.v13i2.6259
https://doi.org/10.21107/rekayasa.v13i2.6259
Publikováno v:
Emitter: International Journal of Engineering Technology, Vol 8, Iss 1 (2020)
The cutting fluid is one of the essential factors in machining to increase machinability. The issuance of ISO 14000 about reducing the use of cutting fluid for its danger for operator and environment has encouraged many researchers to find ways to mi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ba71883061d96f249bb66648d5fe9dae
https://doi.org/10.24003/emitter.v8i1.469
https://doi.org/10.24003/emitter.v8i1.469