Zobrazeno 1 - 10
of 50
pro vyhledávání: '"Reyadh A. Almehaideb"'
Publikováno v:
Journal of Petroleum Exploration and Production Technology. 5:363-373
The effect of injection brine salinity on the displacement efficiency of low water salinity flooding was investigated using sea water at 35,000 ppm, and two field injection waters, namely, Um-Eradhuma (UER) at 171,585 ppm and simsima (SIM) at 243,155
Publikováno v:
Journal of Petroleum Exploration and Production Technology. 3:265-277
Carbon dioxide has been successfully applied worldwide as an enhanced oil recovery process. Several important factors still have not been studied thoroughly. Therefore, this experimental study was carried out to investigate the variations in petrophy
Publikováno v:
Journal of Petroleum Science and Engineering. 69:63-70
Asphaltene precipitation and rock dissolution can significantly hinder the success of carbon dioxide flooding of asphaltenic crude oil in carbonate heterogeneous formations. It is essential during CO2 flooding when both processes exist to study separ
Publikováno v:
Petroleum Science and Technology. 24:717-736
Some experimental tests require floods to be carried out on longer cores, typically 1–3 feet long. When whole cores are not available, side-wall cores each measuring 3–6 inches long are put together to make a composite core. It is the prevailing
Publikováno v:
Environmental Modelling & Software. 19:957-965
A typical natural gas dehydration plant, which employs triethylene glycol (TEG) as the dehydrating agent, is simulated using a steady state flowsheeting simulator (Aspen Plus). All major units were included in the flowsheet, that is: absorption colum
Autor:
Reyadh A. Almehaideb
Publikováno v:
Journal of Petroleum Science and Engineering. 42:157-170
In this work, a new single-well model to simulate asphaltene precipitation, deposition, and plugging of oil wells during primary production is developed. A four-component (asphaltene–oil–gas–water), four-phase (solid–oil–water–gas) limite
Publikováno v:
Petroleum Science and Technology. 22:423-438
Contact angles are used to measure the wetting behavior of two immiscible fluids on a solid surface. Fluids are considered wettings if their contact angles with surface are less than 90°, and they are considered nonwetting, if their contact angles a
Publikováno v:
Petroleum Science and Technology. 22:1465-1489
The use of equations of state (EOS) to model fluid properties is necessary in order to have an internally consistent set of PVT properties, which is essential, especially, when it is desired to use compositional simulators to model two-phase reservoi
Autor:
Reyadh A. Almehaideb
Publikováno v:
Petroleum Science and Technology. 21:1811-1831
Empirical correlations to evaluate crude oil fluid properties such as the formation volume factor, bubble point, viscosity, and oil compressibility above the bubble point are used extensively by petroleum and process engineers to perform calculations
Publikováno v:
Journal of the Japan Petroleum Institute. 46:203-209
Increased demand for gas supply by industry in recent years has promoted the search for optimum strategies to evaluate the performance of dry gas and gas condensate reservoirs. Equations of state (EOS) have become a standard tool to predict the perfo