Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Razif Nordin"'
Autor:
Siti Raihan Hamzah, Muhammad Afiq Rosli, Nadiah Sabihah Natar, Nureel Imanina Abdul Ghani, Nur Aien Muhamad, Mohammad Saifulddin Azami, Mohd Azlan Mohd Ishak, Razif Nordin, Wan Izhan Nawawi
Publikováno v:
Colorants, Vol 2, Iss 1, Pp 73-89 (2023)
The textile industry is suffering a great challenge regarding wastewater management, primarily due to the implementation of improper systems, specifically for dye wastewater treatment. Photocatalysis is one of approaches that have been used to treat
Externí odkaz:
https://doaj.org/article/2e88bd763d6a4aab9dfc70c5161df1c0
Photocatalytic Degradation of Methylene Blue Using Zinc Oxide/Styrene Butadiene Rubber Photocatalyst
Autor:
Rizana Yusof, Muhammad Salihin Zakaria, Wan Izhan Nawawi Wan Ismail, Nadia Latiff, Razif Nordin, Zainal Arifin Mohd Ishak
Publikováno v:
Materials Science Forum. 990:173-176
The zinc oxide/styrene butadiene rubber (ZnO/SBR) photocatalyst was successfully prepared via mechanical mixing at 30 °C. ZnO/SBR square shaped (3 x 3 cm) with 0.54 mm thickness was investigated towards photocatalytic degradation of methylene blue (
Autor:
Zainal Arifin Mohd Ishak, Rizana Yusof, Nadia Latiff, Wan Izhan Nawawi Wan Ismail, Muhammad Salihin Zakaria, Razif Nordin
Publikováno v:
Materials Science Forum. 990:302-305
Commercial grade ZnO were sieved into particle size of 38 to 90 μm at room temperature. X-ray diffraction (XRD) pattern confirms the hexagonal wurzite structure of ZnO microparticles. Irregular shapes of ZnO microparticles were observed by scanning
Autor:
Khairul Anwar Abdul Halim, Yee Wen Yap, Muhammad Salihin Zakaria, Razif Nordin, Muslim Abdurrahman, Bee Ying Lim
Publikováno v:
Journal of Physics: Conference Series. 2080:012005
Degradation properties of recycled plastic causing it less widely used. By adding extra physical properties, its commercial value and usage can be increased. In this current work, green self-cleaning surfaces from recycled high-density polyethylene (
Autor:
Muhammad Salihin Zakaria, Muhammad Aidil Adz’ryl Nor Azizan, Muslim Abdurrahman, Khairul Anwar Abdul Halim, Razif Nordin, Bee Ying Lim
Publikováno v:
Journal of Physics: Conference Series. 2080:012004
In this work, the water-dissolved surface modifier method was introduced to recycled high-density polyethylene (rHDPE) matrix to fabricate green superhydrophobic surfaces. Surface cavities on rHDPE are formed by sodium chloride particles which can be
Autor:
Muhammad Salihin Zakaria, Khairul Anwar Abdul Halim, Hafizuddin Hanafi, Razif Nordin, Nik Noriman Zulkepli
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 957:012007
The effect of epoxidised natural rubber (ENR-50) on cure characteristics and tensile properties (tensile strength, modulus at 100% elongation and elongation at break) of recycled natural rubber catheter filled ethylene propylene diene monomer (EPDM)
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 957:012032
The effect of fiber surface treatment and fiber loading on the tensile and flexural properties of untreated and treated fiber-based sugarcane bagasse reinforced polyester (SBRP) composites have been investigated. Sugarcane bagasse fibers were alkaliz
Publikováno v:
Proceedings of the Second International Conference on the Future of ASEAN (ICoFA) 2017 – Volume 2 ISBN: 9789811084706
Tensile properties and thermal characteristics of blends made from linear low-density polyethylene (LLDPE) and polyvinyl alcohol (PVA) have been investigated. 3-(Trimethoxysilyl)propyl methacrylate (Si A174) was used as a coupling agent. The blends w
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e7ee663e5d4be5d6e9081066a2ade1ed
https://doi.org/10.1007/978-981-10-8471-3_5
https://doi.org/10.1007/978-981-10-8471-3_5
Publikováno v:
Applied Mechanics and Materials. 625:753-756
The effect of white fly ash (WFA) on cure characteristics and tensile properties of natural rubber compounds were investigated in the range of 0 to 30 phr. The size of WFA that is used in this study was 45-75 μm. Based on the result, it is found tha
Autor:
Saidatulakmar Shamsuddin, Zainal Arifin Ahmad, Norhanida Awang Kasani, Wan Nurul Syaza Wan Nawai, Razif Nordin
Publikováno v:
Applied Mechanics and Materials. 625:180-183
The influence of difference sintering temperature: 900°C, 1000°C, 1100°C, 1200°C and 1300°C on the microstructure and mechanical properties of a biomedical Ti–35Nb-2.5Sn-15HA (wt.%) composite was investigated with regard to densification, poro