Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Rajendra Soti"'
Publikováno v:
Frontiers in Built Environment, Vol 6 (2020)
This paper presents a study on a retrofit technique for masonry infilled reinforced concrete (RC) frames. The proposed retrofit technique involves the addition of reinforcing steel bars into epoxy-filled pre-cut grooves on the surface of infill walls
Externí odkaz:
https://doaj.org/article/21e22eb847c843e2a36f5fefc2a0afc0
Publikováno v:
Wood and Fiber Science. 52:102-116
The rocking behavior of self-centering mass plywood panel (MPP) walls was investigated with and without the use of supplementary energy dissipation systems. Two energy dissipation systems were tested. The first system used a kinematically expanding h
Publikováno v:
Forest Products Journal. 70:115-121
Structural wall sheathing such as oriented strand board (OSB) and plywood have been heavily used in residential and commercial timber frame construction. The response of these wood-based composites under elevated temperatures between 100°C and 200°
Publikováno v:
Practice Periodical on Structural Design and Construction. 26
The performance of cross-laminated timber (CLT) panels in building applications have been investigated extensively. However, limited information is available regarding the performance of CL...
Publikováno v:
Journal of Materials in Civil Engineering. 33
Mass plywood panel (MPP) is a veneer-based engineered wood product that recently was introduced in the mass-timber construction industry. Preliminary studies show that MPPs can be a preferr...
Autor:
Andre R. Barbosa, Rajendra Soti
Publikováno v:
Bulletin of Earthquake Engineering. 17:4081-4114
In this paper, unreinforced masonry (URM) and retrofitted masonry walls are modeled experimentally and computationally. The walls were subjected to in-plane loading to assess on the effectiveness of a retrofit solution that makes use of near surface
Publikováno v:
Frontiers in Built Environment, Vol 6 (2020)
This paper presents a study on a retrofit technique for masonry infilled reinforced concrete (RC) frames. The proposed retrofit technique involves the addition of reinforcing steel bars into epoxy-filled pre-cut grooves on the surface of infill walls
Publikováno v:
Journal of Structural Engineering. 146
Mass plywood panels (MPP) are a new engineered wood material produced by Freres Lumber Company, Inc. in Lyons, Oregon. This paper presents a study of the lateral-load response of MPP walls ...
Autor:
Andreas Stavridis, Larry A. Fahnestock, Babak Moaveni, Rajendra Soti, Michael J. Olsen, Hugo Rodrigues, Andre R. Barbosa, Dipendra Gautam, Damon R. Fick, Richard L. Wood
Publikováno v:
Earthquake Spectra. 33:197-218
Following the 25 April 2015 Mw 7.8 Gorkha, Nepal, earthquake and subsequent aftershocks, field surveys were conducted on medium-to-high rise reinforced concrete (RC) frame buildings with masonry infill located in the Kathmandu Valley. Rapid visual as
Autor:
Linh Abdulrahman, Manjip Shakya, Rajendra Soti, Andre R. Barbosa, Michael J. Olsen, Richard L. Wood, Mohammad Ebrahim Mohammadi, Chandra Kiran Kawan
Publikováno v:
Earthquake Spectra. 33:377-384
This paper presents a novel methodology to combine ambient vibration-based operation modal analysis with three-dimensional ground-based lidar data to study damage on the Nyatapola Temple, which is a Bhaktapur UNESCO World Heritage Site that was damag