Zobrazeno 1 - 6
of 6
pro vyhledávání: '"Rafal Gołębski"'
Publikováno v:
Tehnički Vjesnik, Vol 28, Iss 3, Pp 1008-1011 (2021)
Comparsion of measuring methods for the involute profile of the spur gear tooth is described in this paper. The gear profile measurement results from the universal toolmakers microscope are compared with the results of use of Zeiss coordinate measuri
Externí odkaz:
https://doaj.org/article/0d8f700ff65644aabeac00547268d062
Publikováno v:
Tehnički Vjesnik, Vol 26, Iss 1, Pp 22-28 (2019)
The helical surface with circular profile is a special case of the torus-derivative surface, which is shaped using a rotary tool with the circular axial profile of the tool action surface. The helical surface is machined with a tool positioning, in t
Externí odkaz:
https://doaj.org/article/7d671747af9d4af9abc8eb6131e0e199
Autor:
Rafał Gołębski, Arkadiusz Szarek
Publikováno v:
Tehnički Vjesnik, Vol 26, Iss 3, Pp 658-661 (2019)
The article presents an analysis in the field of gear wheel testing method application. The results of tests of gear wheel teeth taken from a damaged gear rim are reposted. Tests were carried out on specimens to establish the causes of gear wheel too
Externí odkaz:
https://doaj.org/article/d8aea674a4f84524b94071badda52188
Publikováno v:
Tehnički Glasnik, Vol 13, Iss 4, Pp 343-348 (2019)
A comparative analysis of the thermomechanical properties of semicrystalline and amorphous polymeric materials was carried out. Samples were produced by using a 3D printing technology on the SIGNAL printer - ATMAT. The following polymeric materials w
Externí odkaz:
https://doaj.org/article/f912acf61b3f489b9269d18781863d8b
Autor:
Rafał Gołębski, Željko Ivandić
Publikováno v:
Tehnički Vjesnik, Vol 25, Iss 2, Pp 643-648 (2018)
The article presents an analysis of the modification of the toothing of spur gears. The aim of the modification of the profile on the tooth tip is to compensate for the tooth deflection under loading and to improve the conditions of gear operation. C
Externí odkaz:
https://doaj.org/article/82f5cffe2a774da8a263c768ffc6a61a
Publikováno v:
Tehnički Vjesnik, Vol 24, Iss 4, Pp 993-1000 (2017)
The article presents a mathematical model for the determination of the tooth surface of the wormwheel machined by either the tangential or the radial method. Wormwheel machining with a special hob and a modular hob is considered. Different methods of
Externí odkaz:
https://doaj.org/article/8cb86d8e013f40f98ab992e330b6b322