Zobrazeno 1 - 10
of 131
pro vyhledávání: '"R.K. Shiue"'
Publikováno v:
Key Engineering Materials. 803:8-12
Dissimilar tungsten inert gas (TIG) welding of furnace tube alloys, T92, T91 and T22, using TG-S2CM, TG-S2CW and TG-S9Cb fillers is performed in the experiment. Post weld heat treatments (PWHTs) of specimens selected from wire cutting of the qualifie
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5c13877e9bba6897d5e1ff273eb017cc
https://doi.org/10.4028/www.scientific.net/kem.803.8
https://doi.org/10.4028/www.scientific.net/kem.803.8
Publikováno v:
Key Engineering Materials. 735:49-53
Microstructures, Vickers depth profiles and low-temperature toughness of the tempered direct water quenched steels have been evaluated in the experiment. Martensite dominates the direct quenched specimen, and it is brittle at low-temperature toughnes
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9d4bd8d649092636062d0f7f51d45783
https://doi.org/10.4028/www.scientific.net/kem.735.49
https://doi.org/10.4028/www.scientific.net/kem.735.49
Publikováno v:
Key Engineering Materials. 732:55-58
The purpose of this investigation is focused on the direct quench and temper mechanisms of the high strength offshore steel. Microstructural analyses of martensite and retained austenite in the direct quenched steel, simulations of martensitic transf
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9c31b61734980509631330ef96d674f5
https://doi.org/10.4028/www.scientific.net/kem.732.55
https://doi.org/10.4028/www.scientific.net/kem.732.55
Publikováno v:
Metallurgical and Materials Transactions A. 47:4777-4783
This study investigates low-temperature toughness of the offshore steel with two different austempering heat treatments. Toughness of upper bainite is significantly lower than that of lower bainite. Low impact toughness of the upper bainite is caused
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::529f79b5c4b6616e276831eff5c808a2
https://doi.org/10.1007/s11661-016-3654-9
https://doi.org/10.1007/s11661-016-3654-9
Publikováno v:
Materials Science and Engineering: A. 653:139-146
A CO 2 laser was applied for dissimilar welding of Ti–15V–3Cr–3Al–3Sn (Ti–15–3) to Ti–6Al–4V (Ti–6–4) alloys. The microstructures and notched tensile strength (NTS) of the dissimilar welds were investigated in the as-welded and po
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::94dd367a183252df91ed93d6ac5fe9c7
https://doi.org/10.1016/j.msea.2015.12.013
https://doi.org/10.1016/j.msea.2015.12.013
Publikováno v:
Materials Research Innovations. 19:S10-249
Evaluating vacuum brazed IN-800/VZ-2177/IN-800 joints by changing the brazing parameters was performed. The joint contains two intermetallic phases, B2Cr5P and Cr4Ni3P4, in the Ni-rich matrix. The quantity of Cr4Ni3P4 compound in brazed joint is redu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7d28ad8db60d368c2da8fccfff6b44aa
https://doi.org/10.1179/1432891715z.0000000002158
https://doi.org/10.1179/1432891715z.0000000002158
Publikováno v:
Materials Research Innovations. 19:S9-69
The ductile-to-brittle transition of direct quenched and tempered martensite begins at 243 K, and the impact energy of the superficial region of the steel plate decreases from 104 J (243 K) to 50 J (213 K). In contrast, the ductile-to-brittle transit
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e04e76409cba9885ea57011c35aa4a93
https://doi.org/10.1179/1432891715z.0000000001922
https://doi.org/10.1179/1432891715z.0000000001922
Publikováno v:
Journal of Nuclear Materials. 465:774-783
ER 308L and 309LMo were utilized as the filler metals for the groove and overlay welds of a 304L stainless steel substrate, which was prepared via a gas tungsten arc-welding process in multiple passes. U-bend and weight-loss tests were conducted by t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::33a6ef7e3283b39456d766ec7f264ab7
https://doi.org/10.1016/j.jnucmat.2015.06.060
https://doi.org/10.1016/j.jnucmat.2015.06.060
Autor:
R.K. Shiue, Cheng Yen Wang
Publikováno v:
Advanced Materials Research. 1101:99-103
The purpose of this research is focused on vacuum furnace brazing Incoloy 800 (IN-800) using the copper filler foil. Microstructural evolution and shear strength of brazed joints for various brazing conditions has been evaluated in the experiment. Th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b8ff17c358f3fd3e9a7ca9aded307f7e
https://doi.org/10.4028/www.scientific.net/amr.1101.99
https://doi.org/10.4028/www.scientific.net/amr.1101.99
Publikováno v:
Advanced Materials Research. 1101:438-441
The purpose of this investigation is focused on the welding process simulation using the SYSWELD software. It has been used to conduct the simulation of the tungsten inert gas (TIG) welding process. 316L stainless steel (316L SS) is welded with a low
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2dffb817961c0b318870d1607b85e299
https://doi.org/10.4028/www.scientific.net/amr.1101.438
https://doi.org/10.4028/www.scientific.net/amr.1101.438