Zobrazeno 1 - 10
of 29
pro vyhledávání: '"R. Zauter"'
Publikováno v:
Materials Science and Engineering: A. 477:43-49
Unlike standard wrought aluminium bronze, high-performance wrought aluminium bronze with an aluminium content of more than 12 wt.% and additions of iron, cobalt and manganese is difficult to produce by continuous casting. This type of wrought alumini
Publikováno v:
IEEE Transactions on Applied Superconductivity. 17:2572-2575
The advantages of high-tin bronze which is produced by the innovative process "spray forming" and its commercial application in Nb3Sn superconductor wire are presented. An important decision in the processing of Nb3Sn superconductor wire after the br
Some aspects of thermomechanical fatigue of AISI 304L stainless steel: Part I. creep- fatigue damage
Publikováno v:
Metallurgical and Materials Transactions A. 25:401-406
Thermomechanical fatigue (TMF) tests on the austenitic stainless steel AISI 304L have been conducted under “true≓ plastic-strain control in vacuum. This report considers the damage oc-curring during TMF loading. It is shown how the temperature in
Publikováno v:
Metallurgical and Materials Transactions A. 25:408-413
The influence of plastic strain rate, plastic strain amplitude, and temperature interval on the dislocation arrangements which are formed during thermomechanical fatigue (TMF) of the aus-tenitic stainless steel AISI 304L in “true” plastic-strain
Publikováno v:
ISIJ International. 34:697-703
Publikováno v:
Fatigue & Fracture of Engineering Materials and Structures. 16:237-253
High-temperature thermomechanical fatigue (TMF) tests were performed on monocrystalline specimens of the γ′-precipitate-strengthened nickel-base superalloy CMSX-6. The specimens had axial orientations near [001]. In-phase, out-of-phase, clockwise-
Publikováno v:
Philosophical Magazine A. 66:425-436
Electron channelling contrast is obtained in the scanning electron microscope by detecting back-scattered electrons created by a parallel incident electron beam. The intensity of the back-scattered electrons depends on the orientation of the incident
Publikováno v:
Materials Science and Engineering: A. 124:125-132
The behaviour of AISI 304L stainless steel was studied in tensile creep tests at constant stresses in the temperature range from 250 to 650 °C. At 250 and 400 °C no creep deformation could be observed. Rather, after a stress-dependent loading strai
Publikováno v:
Continuous Casting: Proceedings of the International Conference on Continuous Casting of Non-Ferrous Metals
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f913588d6d468acf2692f55ffd33e42b
https://doi.org/10.1002/9783527607969.ch35
https://doi.org/10.1002/9783527607969.ch35