Zobrazeno 1 - 10
of 136
pro vyhledávání: '"R. Weichenhain"'
Autor:
J. Ihlemann, R. Weichenhain-Schriever
Publikováno v:
Thin Solid Films. 550:521-524
Well defined regions of silicon suboxide (SiOx) thin films deposited on fused silica substrates by vacuum evaporation are transferred to a receiver substrate by pulsed laser induced forward transfer. The receiver substrate (fused silica, polycarbonat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8c5e7103bf65a9a5157f71bad3445d4f
https://doi.org/10.1016/j.tsf.2013.10.128
https://doi.org/10.1016/j.tsf.2013.10.128
Publikováno v:
Acta Biotechnologica. 22:245-260
For the first time in intact bacterial cells, the dynamics of the build-up of soluble cytosolic inorganic polyphosphate (polyP) during aeration, and its breakdown during anaerobiosis have been observed with a time resolution of 50 s. Under conditions
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ec5d6bcd9fbf39bd81cbd58c42dc4a10
https://doi.org/10.1002/1521-3846(200207)22:3/4<245::aid-abio245>3.0.co
https://doi.org/10.1002/1521-3846(200207)22:3/4<245::aid-abio245>3.0.co
Publikováno v:
Solid State Phenomena. :441-446
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3a13c9fdbdd04c0f6960fe06d3d73a3a
https://doi.org/10.4028/www.scientific.net/ssp.80-81.441
https://doi.org/10.4028/www.scientific.net/ssp.80-81.441
Autor:
Kirsten Bobzin, Ernst Wolfgang Kreutz, Alexander Horn, R. Weichenhain, E. Lugscheider, R. Poprawe, A. Etzkorn
Publikováno v:
Surface and Coatings Technology. :49-53
In this paper the deposition behavior of zirconia on laser drilled surfaces is reported. The samples were prepared with laser drilled holes (diameter 200 μm) with tilting angles of 0°, 15°, 30°, 45° and 56°. As substrate material, VPS-MCrAlY-co
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::dd2e870677ecea923b23595fa3234429
https://doi.org/10.1016/s0257-8972(00)00872-0
https://doi.org/10.1016/s0257-8972(00)00872-0
Publikováno v:
Applied Physics A: Materials Science & Processing. 69:S855-S858
Nano- and picosecond laser radiation offers better possibilities by achieving higher accuracy in microstructuring because of much lower heat load compared to larger pulses. The influence of wavelength, pulse energy, overlap and the properties of proc
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1e0469eb0007214f16d7bcfb125aec72
https://doi.org/10.1007/s003390051546
https://doi.org/10.1007/s003390051546
Publikováno v:
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 151:279-284
Metal/polymer adhesion is a crucial factor of many applications in microelectronic or microsystem technologies. It depends on chemical and structural properties of the interface, often involving just a few atomic layers. Adhesion can be influenced by
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::45f847e69168c921df1e6d33f434a7bb
https://doi.org/10.1016/s0168-583x(99)00074-9
https://doi.org/10.1016/s0168-583x(99)00074-9
Publikováno v:
Applied Surface Science. :885-891
The removal processes of ceramics and metals were investigated using pico- and nanosecond laser radiation produced by diode-pumped Nd:YAG lasers. The laser radiation was focused to spot diameters smaller than 10 mm, yielding power densities up to 5 =
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::4d1d11314970ecf1f067f95dd9a95fb3
https://doi.org/10.1016/s0169-4332(97)00762-9
https://doi.org/10.1016/s0169-4332(97)00762-9
Publikováno v:
Journal of Adhesion Science and Technology. 11:1229-1242
Chemical and morphological changes resulting from pretreatment with excimer-laser radiation were investigated for poly(butylene terephthalate) (PBT) surfaces. The irradiated surfaces were coated with aluminum or copper films of thickness 10 nm, enabl
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::07242caa7cb1f6628ff87de5b373b687
https://doi.org/10.1163/156856197x00606
https://doi.org/10.1163/156856197x00606
We investigate the ablation of SiOx thin films on fused silica substrates using single-pulse exposures at 193 nm and 248 nm. Two ablation modes are considered: front side (the surface of a film is irradiated from above) and rear side (a film is irrad
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ef207363b90e263fb156e0be663068fd
http://resolver.sub.uni-goettingen.de/purl?gs-1/6717
http://resolver.sub.uni-goettingen.de/purl?gs-1/6717
Publikováno v:
SPIE Proceedings.
Micromachining of SiC with 1(omega) , 2(omega) , 3(omega) -Nd:YAG laser radiation with pulse durations in the ps to ns regime is performed in various processing gas atmospheres as a function of processing variables showing the influence of the heat a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a71b40b3ba21b942e827ab986b2ada2f
https://doi.org/10.1117/12.425290
https://doi.org/10.1117/12.425290