Zobrazeno 1 - 10
of 16
pro vyhledávání: '"Qomarotun Nurlaila"'
Autor:
Budianto Budianto, Zefki Okta Feri, Qomarotun Nurlaila, Helena Sitorus, Tina Hernawati Suryatman
Publikováno v:
Jurnal Ilmiah SINERGI, Vol 27, Iss 2, Pp 201-210 (2023)
The failure to implement lean manufacturing (LM) in the food industry was caused by the overlapping application of LM tools. The application of LM in the food industry is experiencing problems in the form of confusion in the placement of QS or Qualit
Externí odkaz:
https://doaj.org/article/b669be897a8849018eaaac941ea8de1b
Autor:
Qomarotun Nurlaila
Publikováno v:
Jurnal Sistem dan Manajemen Industri, Vol 1, Iss 1, Pp 49-54 (2017)
PT. XYZ is a manufacturing company that produces the constituent components of HDD (Hard Disk Drive) products. One of the products produced by PT. XYZ made from rubber. The product has a strict specification, both for the accuracy of size and for dis
Externí odkaz:
https://doaj.org/article/5e03afd8b39c4dd09d911e17e86e7e61
Publikováno v:
International Journal of Engineering Materials and Manufacture, Vol 3, Iss 4 (2018)
Metal stamping industry has Quick Die Change (QDC) as a form of Single Minutes Exchange of Dies (SMED) as an efficient production technique where the implementation depends on operator’s activities, clamping system, accessories type and position, e
Externí odkaz:
https://doaj.org/article/b1b02de71d88460a804daaf972b092d0
Autor:
Qomarotun Nurlaila, Faradila Ramadhani Siketang, Aliato Nainggolan, Muhammad Rezki, Natal Wijaya Siahaan, Cristi Romauli Sirait
Publikováno v:
MINDA BAHARU. 6:171-185
Tujuan dari pelaksanaan kegiatan pengabdian ini adalah untuk meningkatkan pendapatan UMKM di kelurahan Tembesi dengan melakukan pendampingan dan penyuluhan tentang metode pemasaran pada masa pandemi Covid-19. Metode yang digunakan adalah dengan melak
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5e09ae6da77c9ece4ce70dd48ec91fee
https://doi.org/10.33373/jmb.v6i2.4233
https://doi.org/10.33373/jmb.v6i2.4233
Publikováno v:
SIGMA TEKNIKA. 5:351-360
Products 3D35 produced by PT. Team Metal Indonesia uses CNC machines, through two main processes, roughing process and finishing process. The main problem faced is reject due to the remnants of the piece (chips). Chips stick to the 1 mm chuck collect
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::18e21a8666b7058d8d77da6c67abef39
https://doi.org/10.33373/sigmateknika.v5i2.4611
https://doi.org/10.33373/sigmateknika.v5i2.4611
Autor:
Qomarotun Nurlaila
Publikováno v:
SIGMA TEKNIKA. 5:158-166
PT. ABC is a Japanese PMA that produces HDD (Hard Disk Drive) components, where the assembly process still uses a partial automatic machine whose productivity still depends on the performance of the operator to do manual work. This research aims to i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6361efe95c3eab9a55fe159e5b23cfd1
https://doi.org/10.33373/sigmateknika.v5i1.4123
https://doi.org/10.33373/sigmateknika.v5i1.4123
Autor:
Qomarotun Nurlaila
Publikováno v:
PROFISIENSI: Jurnal Program Studi Teknik Industri. 9:9-19
The research was conducted to improve employee discipline in having absenteeis. PT. ABC has been using the attendance system with ID Card for 10 years. When employees forget to bring their ID cards, there will be a lot of manual work which is wastefu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0a487d023484ca55525458b0c845a60b
https://doi.org/10.33373/profis.v9i1.3208
https://doi.org/10.33373/profis.v9i1.3208
Publikováno v:
SIGMA TEKNIKA. 4:115-123
The research was conducted to increase the productivity of the sandblasting machine on the SSIP model at PT. XYZ. The average productivity in March 2017 was 238 pieces / hour, which is below the productivity target set at 400 pieces / hour. Refer to
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6e34e391147d8a457da48796adc3bec7
https://doi.org/10.33373/sigmateknika.v4i1.3053
https://doi.org/10.33373/sigmateknika.v4i1.3053
Autor:
Qomarotun Nurlaila
Publikováno v:
PROFISIENSI: Jurnal Program Studi Teknik Industri. 8:143-153
This research was performed on 3 cutting tools which are tool drill 1.8mm, 2.5mm in diameter and tool back chamfer 2.2mm in diameter. Hardness value from each cutting tool was approximately 300 HRC. Meanwhile, material used in this research is SUS 42
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::591bd2197c86a13f64b2e0db332d2245
https://doi.org/10.33373/profis.v8i2.2796
https://doi.org/10.33373/profis.v8i2.2796
Autor:
Qomarotun Nurlaila
Publikováno v:
SIGMA TEKNIKA. 3:148-159
This research was conducted at PT. HDD, which is a Japanese PMA and is engaged in manufacturing HDD (Hard Disk Drive) components. On mid of August 2020, customer of PT. HDD revise the order quantity. Customer reduce order quantity from August to Dece
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::06891732456c68f6dad2d5692ba97929
https://doi.org/10.33373/sigma.v3i2.2753
https://doi.org/10.33373/sigma.v3i2.2753