Zobrazeno 1 - 10
of 28
pro vyhledávání: '"Puteri Sri Melor Megat Yusoff"'
Autor:
Ainakulova Dana Tulegenkyzy, Puteri Sri Melor Megat-Yusoff, Khaldun Mohammad Al Azzam, Bekbayeva Lyazzat Kairatovna, Arpit Goyal, Ganjian Eshmaiel, El-sayed Negim, Moshera Samy, Balasubramani Ravindran
Publikováno v:
International Journal of Technology, Vol 15, Iss 4, Pp 903-916 (2024)
Anticorrosion coatings are specialized products designed to protect metal surfaces from costly and dangerous corrosion, acting as barriers against corrosive organisms. Therefore, this study examined the physical and mechanical properties of epoxy
Externí odkaz:
https://doaj.org/article/c1fb380cfa3344cd90e324b7664f04f2
Publikováno v:
Advances in Materials Science and Engineering, Vol 2013 (2013)
The main objective of this research is to investigate the effect of environmental degradation on the mechanical properties of kenaf/PET fiber reinforced POM hybrid composite. Kenaf and PET fibers were selected as reinforcements because of their good
Externí odkaz:
https://doaj.org/article/f47db48291a24cc688db3a7b12d9a906
Autor:
Lukmon Owolabi Afolabi, Puteri Sri Melor Megat-Yusoff, Zulkifli Mohamad Ariff, Muhammad Syahmi Hamizol
Publikováno v:
Journal of Materials Research and Technology, Vol 8, Iss 3, Pp 3102-3113 (2019)
Natural cellulose fiber extract from Pandanus tectorius (Screw pine) leaves is comprehensively investigated as viable alternative for synthetic based fibers made from petro-chemical which is non-degradable and toxic. P. tectorius leaves fiber is extr
Externí odkaz:
https://doaj.org/article/cefe3c118665495bb80a5266b2dff0db
Autor:
Muhammad Shafiq Mat Shayuti, Puteri Sri Melor Megat Yusoff, Putri Faizura Megat Khamaruddin, Rahida Wati Sharudin, Tengku Amran Tengku Mohd, Mohamad Zaki Abdullah
Publikováno v:
Materials Science Forum. 995:56-62
The effect of blending polycarbonate (PC) into polypropylene (PP) matrix polymer on thermal conductivity and crystal structure was studied. The blends consisted of 5 to 35 of PC with 5 compatibilizer (polypropylene-graft-maleic anhydride or PP-g-MA),
Autor:
Puteri Sri Melor Megat Yusoff, Faiz Ahmad, Eugenio Oñate, Khurshid Malik, Muhammad Rafi Raza, Norhamidi Muhamad, Saad Ali
Heat dissipation remains a key challenge to be addressed, determining the performance and durability of smart electronic devices. Graphene reinforced metal matrix composites have been extensively studied as a thermal management material due to their
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d4388c713a9cb48f6d2cb3a332f96c62
https://www.scipedia.com/public/Ali_et_al_2021a
https://www.scipedia.com/public/Ali_et_al_2021a
Autor:
Qandeel Fatima Gillani, Norlaili Amir, Rafiq Ahmad, Puteri Sri Melor Megat Yusoff, Hammad Aziz, Muhammad Hazwan Abdul Halim, Faiz Ahmad
Publikováno v:
Key Engineering Materials. 740:41-47
This studies discuss the synergistic effects of titanium dioxide (TiO2) and zinc borate on thermal stability and water resistance of intumescent fire retardant coatings. TiO2 in association with a traditional intumescent flame retardant system which
Publikováno v:
Surface Engineering
Surface Engineering, 2019, Surface Engineering, pp.1743-2944. ⟨10.1080/02670844.2019.1636536⟩
Surface Engineering, 2019, Surface Engineering, pp.1743-2944. ⟨10.1080/02670844.2019.1636536⟩
Intumescent coating (IC) is one of the famous protection systems for steel structures in the event of fire. Over the last few decades, ICs have been gaining much attention because they are applied ...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::587b6ab1ca42eb855a0016ca6313ed17
https://hal.univ-lille.fr/hal-02310385
https://hal.univ-lille.fr/hal-02310385
Publikováno v:
Journal of Natural Fibers. 13:532-546
The main objective of this research is to investigate the effect of compression cycles and hybridization on mechanical and physical properties of kenaf fiber reinforced POM composite. In this study, kenaf, and polyethylene terephthalate (PET) fiber w
Autor:
Faiz Ahmad, Puteri Sri Melor Megat Yusoff, Randall M. German, Khurram Altaf, Muhammad Zubair Aslam, Mohd Afian Omar
Publikováno v:
Powder Technology. 295:84-95
Although various materials have been exploited throughout history to restore damaged organs, metallic biodevices are preferred in the biomedical industry because of their superior ability to withstand high static or cyclic loads. An implant is a medi
Autor:
Muhammad Khairul Amir Nawi, Wen Lin Chai, Muhammad Zubair Aslam, Puteri Sri Melor Megat Yusoff, Wei Cheong Ngeow, Faiz Ahmad
Publikováno v:
Arabian Journal for Science and Engineering. 41:4669-4681
Powder injection molding (PIM) is a hybrid of powder metallurgy and plastic injection molding. It is used to develop metallic molded parts with intricate shapes and with improved properties compared with those offered by their wrought counterparts. P