Výsledky vyhledávání - "Pul Muharrem"

Akademický článek

The effect of sintering temperature and time on microstructure, hardness and wear behaviors of Al 99.9/GNP composites

Autor: Pul Muharrem, Erdem Umit, Pehlivanli Onur Zuhtu

Publikováno v: Science of Sintering, Vol 55, Iss 1, Pp 29-44 (2023)

In this study, it was aimed to investigate the microstructure, hardness and wear behavior of graphene nanoplate (GNP) reinforced composites with Al 99.9 matrix produced by powder metallurgy. Different temperatures and times were applied in the sin

Externí odkaz: https://doaj.org/article/f1028708566b4bad9be353e973f7ae51

Zobrazit plný text záznamu

Akademický článek

Effect of B4C reinforcement ratio and sintering temperature on the mechanical behavior in Al-B4C composites

Autor: Pul Muharrem

Publikováno v: Science of Sintering, Vol 50, Iss 1, Pp 51-61 (2018)

In this study, powders of Al 1070 and B4C were prepared by volume in three different reinforcement ratios 4 % B4C, 8 % B4C and 16 % B4C compacted under the pressure of 500 MPa with cold pressing method then sintered under the temperatures of 500,

Externí odkaz: https://doaj.org/article/8b0b780858854fbc8bddde9f4b3d3705

Zobrazit plný text záznamu

Akademický článek

Effect of matrix temperature and powder size on the infiltration height of SiO2-reinforced Al 7075 matrix composites produced by vacuum infiltration

Autor: Çalın Recep, Pul Muharrem, Bican Osman, Küçüktürk Gökhan

Publikováno v: Science and Engineering of Composite Materials, Vol 24, Iss 1, Pp 149-153 (2017)

In this study, the effect powder size and matrix temperature on the physical and mechanical properties of SiO2-reinforced Al 7075 matrix composites were investigated. It was observed that with increasing powder size and temperature, infiltration heig

Externí odkaz: https://doaj.org/article/6344843ef6ad47fd9830ec5d592152a3

Zobrazit plný text záznamu

Akademický článek

An Investigation on the Microstructure and Wear Properties of TiB2 Reinforced AA2014 Aluminium Alloy Produced by Vacuum Infiltration

Autor: Araz Şule Ocak, Çalın Recep, Pul Muharrem, Bican Osman, Okur Onur

Publikováno v: High Temperature Materials and Processes, Vol 34, Iss 5, Pp 487-493 (2015)

In this study, microstructural, mechanical and wear properties of TiB2 reinforced Al 2014-based composites produced by vacuum infiltration were investigated under different production temperatures. It was observed that the microstructures of the comp

Externí odkaz: https://doaj.org/article/1b4a0794b8b543c091ca4572c20a602b

Zobrazit plný text záznamu

Akademický článek

Investigation of machinability in Al-MgO composites produced by melt-stirring

Autor: Pul Muharrem, Uzun Gültekin, Çalın Recep, Şeker Ulvi

Publikováno v: Science and Engineering of Composite Materials, Vol 20, Iss 2, Pp 155-162 (2013)

In this study, Al-MgO reinforced metal matrix composites of 5%, 10% and 15% reinforcement-volume ratios were produced by melt-stirring and subjected to machining tests by carbide and coated carbide cutting tools. Machining tests were conducted with 1

Externí odkaz: https://doaj.org/article/dbf18802dbc448d4b9948bbd863a3082

Zobrazit plný text záznamu

Akademický článek

Investigation of the Effect of Ulexite Additive on the Mechanical Strength and Thermal Conductivity of Cement Mortar.

Autor: Filazi, Ahmet¹ ahmetfilazi@kku.edu.tr, Pul, Muharrem² mpul@kku.edu.tr, Pehlivanlı, Zühtü Onur³ pehlivanli@kku.edu.tr, Uzun, İbrahim³ uzun@kku.edu.tr

Publikováno v: Sakarya University Journal of Science (SAUJS) / Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi. Aug2024, Vol. 28 Issue 4, p697-707. 11p.

Zobrazit plný text záznamu