Zobrazeno 1 - 10
of 594
pro vyhledávání: '"Printing parameters"'
Publikováno v:
Journal of Materials Research and Technology, Vol 34, Iss , Pp 337-347 (2025)
Most of the research on Binder Jetting 3D Printing of AISI316L stainless steel has focused on optimizing the sintering cycle, with less emphasis on the effect of printing parameters on the properties in the sintered state. This study aims to investig
Externí odkaz:
https://doaj.org/article/c0cbb6a7b58b48889ed8477616cfcea1
Publikováno v:
Rapid Prototyping Journal, 2024, Vol. 30, Issue 6, pp. 1161-1169.
Externí odkaz:
http://www.emeraldinsight.com/doi/10.1108/RPJ-08-2023-0294
Publikováno v:
Journal of Engineering Technology and Applied Physics, Vol 6, Iss 2, Pp 1-8 (2024)
The mechanical properties such as tensile behavior of a 3D printed object can be influenced by various printing parameters, including printing temperature, orientation, infill density, and printing speed. This study focuses on investigating the effec
Externí odkaz:
https://doaj.org/article/e2c14ddca4b74e658e3f16b2b001559f
Autor:
Hamad S. AlRumaih, Mohammed M. Gad
Publikováno v:
Prosthesis, Vol 6, Iss 4, Pp 970-978 (2024)
Purpose: This study evaluates and compares the effect of printing layer thickness (LT) and post-polymerization time (PPT) on the flexural strength and hardness of three 3D-printed resins after thermal aging. Methods: A bar shape (64 × 10 × 3.3 mm)
Externí odkaz:
https://doaj.org/article/b7cc04aa0fb8458e864d663b5b182e5b
Autor:
Yousif A. Al-Dulaijan, Rand Aldamanhori, Hadeel Algaoud, Rand Alshubaili, Reem Alkhateeb, Haidar Alalawi, Reem Abualsaud, Firas K. Alqarawi, Faisal D. Al-Qarni, Mohammed M. Gad
Publikováno v:
Frontiers in Oral Health, Vol 5 (2024)
ObjectivesThe influence of printing parameters on the marginal and internal fit of three-dimensional (3D) printed interim fixed partial dentures (IFPDs) has been understudied. This investigation sought to elucidate the impact of printing orientation
Externí odkaz:
https://doaj.org/article/92b9a2a5810a401d9ad2db6ea0a1e2c5
Autor:
Martignoni, Ludovico, Vegro, Andrea, Candidori, Sara, Shaikh, Mohammad Qasim, Atre, Sundar V., Graziosi, Serena, Casati, Riccardo
Publikováno v:
Rapid Prototyping Journal, 2024, Vol. 30, Issue 11, pp. 123-141.
Externí odkaz:
http://www.emeraldinsight.com/doi/10.1108/RPJ-06-2023-0194
Publikováno v:
Rapid Prototyping Journal, 2024, Vol. 30, Issue 4, pp. 662-676.
Externí odkaz:
http://www.emeraldinsight.com/doi/10.1108/RPJ-09-2023-0334
Publikováno v:
مجلة النهرين للعلوم الهندسية, Vol 27, Iss 3 (2024)
Specimens with the structure of a face-centered cubic were produced using several sets of printing conditions. An experimental testing is conducted to carefully evaluate the microstructural analysis and compressive strength of this structure. The res
Externí odkaz:
https://doaj.org/article/8681fac8db1a449c941e756a2a9fa3c9
Publikováno v:
Rapid Prototyping Journal, 2023, Vol. 30, Issue 2, pp. 214-227.
Externí odkaz:
http://www.emeraldinsight.com/doi/10.1108/RPJ-04-2023-0153
Publikováno v:
علوم و تکنولوژی پلیمر, Vol 36, Iss 5, Pp 539-549 (2023)
Hypothesis: Fused filament fabrication (FFF) method is widely used in additive manufacturing due to its benefits, such as ease of use, cost-effectiveness, and availability. The mechanical properties of polylactic acid (PLA) printed by the FFF method
Externí odkaz:
https://doaj.org/article/2c6d58c7bf3f47cfa85445b6ababf80f