Zobrazeno 1 - 10
of 33
pro vyhledávání: '"Predrag Janković"'
Autor:
Miloš Madić, Constantin Cristinel Girdu, Dragan Marinković, Predrag Janković, Milan Trifunović
Publikováno v:
Tehnički Vjesnik, Vol 31, Iss 6, Pp 1884-1891 (2024)
Geometrical characteristics of obtained kerf are important quality indicators in laser cutting. Considering that they are differently affected by a number of factors, this study is focused on the analysis of kerf width and its variation in CO2 laser
Externí odkaz:
https://doaj.org/article/3b424f693fd9455193afa22a038374c5
Publikováno v:
Acta Technica Jaurinensis, Vol 16, Iss 3, Pp 90-98 (2023)
The increasing demand for environmentally friendly manufacturing processes has led to the need for optimizing the use of cutting fluids in turning and milling processes. Cutting fluids are commonly used in cutting processes to reduce tool wear and im
Externí odkaz:
https://doaj.org/article/25d3bf2012254a28b0e4c31acf4666c9
Publikováno v:
Proceedings on Engineering Sciences, Vol 1, Iss 1, Pp 436-439 (2019)
This paper is focused on the analysis and optimization of surface roughness obtained in CO2 laser cutting of 4mm thick P265GH steel plate using oxygen as assist gas. For the purpose of experimental investigation central composite face-centered factor
Externí odkaz:
https://doaj.org/article/bbfc1eaf567242ffb404e0f6582b5f38
Publikováno v:
Facta Universitatis. Series: Architecture and Civil Engineering, Vol 17, Iss 4, Pp 417-428 (2019)
Water jet processing techniques can be successfully applied in many fields of civil engineering, such as: structural engineering, structural reconstruction, renovation, demolition and recycling. The problem of cutting difficult-to-machine materials l
Externí odkaz:
https://doaj.org/article/159571e981294ec88df37b5b5aae4a45
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 234:1323-1332
Taking full advantage of what laser cutting technology offers in terms of achieving superb quality cuts at low cost and high production rates requires the optimization of laser cutting parameters. This implies the need to formulate and solve differen
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2e217d16735cf41b963e230603cf01cc
https://doi.org/10.1177/0954405420911529
https://doi.org/10.1177/0954405420911529
Publikováno v:
Arabian Journal for Science and Engineering. 44:10245-10256
Surface roughness is one of the main indicators of quality assessment of finished parts processed by laser cutting. This paper presents the experimental results regarding surface roughness of laser cuts in high-power CO2 laser cutting of AA5754 alumi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::57576c67b82aaf22d3118cd9369eefc4
https://doi.org/10.1007/s13369-019-04037-9
https://doi.org/10.1007/s13369-019-04037-9
Publikováno v:
Proceedings on Engineering Sciences, Vol 1, Iss 1, Pp 436-439 (2019)
This paper is focused on the analysis and optimization of surface roughness obtained in CO2 laser cutting of 4mm thick P265GH steel plate using oxygen as assist gas. For the purpose of experimental investigation central composite face-centered factor
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3f7aec39208fde1bb05064db103ebf00
https://doi.org/10.24874/pes01.01.057
https://doi.org/10.24874/pes01.01.057
Publikováno v:
Advanced Technologies. 7:64-68
Galvanic cadmium coatings were applied on the material in order to improve some properties such as: corrosion resistance, improved tribological properties, chemical stability, etc. The paper describes the properties of the cadmium coating and a repla
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d5d7467e7f241fe7656d886fc1509b06
https://doi.org/10.5937/savteh1801064j
https://doi.org/10.5937/savteh1801064j
Publikováno v:
Journal of Cleaner Production. 303:127043
This paper focuses on turning a commonly used industrial plastic, unreinforced polyoxymethylene copolymer (POM-C), using a cutting tool made of polycrystalline diamond (PCD). Conducted experimental investigation was the basis for the analysis of the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b0123ac7ada58780ca96daec5e2d962f
https://doi.org/10.1016/j.jclepro.2021.127043
https://doi.org/10.1016/j.jclepro.2021.127043
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 1018:012025
Engineering design problems involving a set of continuous, discrete and integer design variables and complex, non-convex objective functions and linear and non-linear constraints represent optimization problems with considerable complexity which are
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::427f9ec91eb21b367233ba873988af85
https://doi.org/10.1088/1757-899x/1018/1/012025
https://doi.org/10.1088/1757-899x/1018/1/012025