Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Prakob Kitchaiya"'
Publikováno v:
Chemical Engineering Transactions, Vol 87 (2021)
Vitamin E (VitE) from palm oil is usually separated from palm fatty acid distillate. VitE separation from crude palm oil (CPO) has been rarely reported. This work presents a separation of VitE from CPO in a bench scale process to attain a high concen
Externí odkaz:
https://doaj.org/article/b75bfd4c7ce447d091a67bbe40d59473
Publikováno v:
Chemical Engineering Transactions, Vol 76 (2019)
In the present study, dynamic performance of a dehumidification desiccant regeneration system has been investigated theoretically. The simulation of the combined heat and mass transfer that occur in a solid desiccant packed bed is carried out with MA
Externí odkaz:
https://doaj.org/article/9aede8791a6b4b6080b5f22f2eb2ea99
Publikováno v:
Chemical Engineering Transactions, Vol 75 (2019)
High concentration of lactic acid production is not practical in industry, which is currently produced by fermentation. This work investigated lactic acid synthesis derived from invert sugar in an alkaline solution at low temperature under atmospheri
Externí odkaz:
https://doaj.org/article/fba7425f8c1a4d379744139df86efa39
Publikováno v:
Journal of Oleo Science. 71:51-55
Vitamin E (VitE) production from crude palm oil (CPO) has been extensively studied and industrially conducted. VitE in CPO is in the range of 600 to 1,000 ppm, and is usually produced from one of the main by-products of edible palm oil production, na
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::dbdfd1fc537cf669d86f238077495d6f
https://doi.org/10.5650/jos.ess21169
https://doi.org/10.5650/jos.ess21169
Publikováno v:
International Journal of Heat and Technology. 39:1134-1142
In a conventional desiccant packed bed dehumidification, the adsorption and desorption operations switched at a constant cycle. However, this Conventional Steady Cyclic (CSC) operation was not performed well under disturbances. Therefore, a Temperatu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::803d7a6a1a986780e2ac27d8d699dec8
https://doi.org/10.18280/ijht.390411
https://doi.org/10.18280/ijht.390411
Autor:
Paisarn Boonyarat, Prakob Kitchaiya, Thirapat Kitinirunkul, Chesda Kiriratnikom, Suchuchchai Nuanklai
Publikováno v:
Key Engineering Materials. 877:108-113
This study focused on the mechanical properties and ablation properties of liner insulation in rocket motors for improving rocket performance by means of tensile strength, elongation, ablation rate and density. The following parameters were varied: a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3041c7672a0fab8b8d1c0d3fe0daf3bc
https://doi.org/10.4028/www.scientific.net/kem.877.108
https://doi.org/10.4028/www.scientific.net/kem.877.108
Autor:
Apinan Namkanisorn, Boonchai Chotiviriyavanich, Kuntaphon Lerssubsuree, Nuttapol Lerkkasemsan, Ruenruedee Benjangkaprasert, Prakob Kitchaiya
Publikováno v:
Energy Procedia. 142:4138-4144
A falling film evaporator with a liquid flowing laminarly outside vertical cylindrical tubes was studied by a mathematical modeling in order to describe the performance of the system and the results are later used for a design of a falling film evapo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c1a4b94ff37cdfe1d7e3d43370c70f5a
https://doi.org/10.1016/j.egypro.2017.12.337
https://doi.org/10.1016/j.egypro.2017.12.337
Autor:
Jompatara Siriworachanyadee, Norasage Pattanadech, Sakda Maneerot, Phethai Nimsanong, Prakob Kitchaiya
Publikováno v:
2019 IEEE 20th International Conference on Dielectric Liquids (ICDL).
Polarization and Depolarization Current (PDC) measurement is a non-destructive dielectric testing method used to determine the electrical properties of transformer insulation. Nowadays, natural ester has been used as alternative liquid insulation in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f0c7dcb5f43ff15869126498ec9d41bc
https://doi.org/10.1109/icdl.2019.8796593
https://doi.org/10.1109/icdl.2019.8796593
Publikováno v:
International Journal of Heat & Technology; Aug2021, Vol. 39 Issue 4, p1134-1142, 9p
This study investigated a numerical simulation of a column packed bed using silica gel. This bed is either stationary or steadily rotating, leading to different operation-regeneration schemes. Although models of these systems have already been develo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5a58d9226ba6e8d16d3fa6322667884a
https://doi.org/10.1016/b978-0-444-64235-6.50011-5
https://doi.org/10.1016/b978-0-444-64235-6.50011-5
