Zobrazeno 1 - 10
of 3 934
pro vyhledávání: '"Polymer modified"'
Autor:
Aakash Singh, Ankit Gupta
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-18 (2024)
Abstract This research study evaluates the impact of low-density polyethylene (LDPE) modified asphalt binder on the mechanical performance and economical feasibility of asphalt concrete (AC) mixtures. LDPE-modified mixtures were compared with convent
Externí odkaz:
https://doaj.org/article/7e8a999fc84d4bcdb30efc9791e73299
Publikováno v:
Engineering and Technology Journal, Vol 42, Iss 5, Pp 569-581 (2024)
One of the most important construction activities worldwide is the construction using autoclaved aerated concrete units at the global level is increasing significantly and the use of these units leads to the consumption of large amounts of resources
Externí odkaz:
https://doaj.org/article/271a56f346774e068adeac27fd3dc11d
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-19 (2024)
Abstract The effects of moisture and drying shrinkage can lead to uneven settlement, cracking, and other diseases in loess subgrade. The objective of this study was to investigate the effects of amide polymer (AP) on the permeability, mechanical prop
Externí odkaz:
https://doaj.org/article/30bba208b9f74c159ed820212879f6cf
Publikováno v:
Open Engineering, Vol 14, Iss 1, Pp 407-15 (2024)
The goal of the investigation is to produce a cement mortar for building units and a high-performance ceramic tile adhesive by using V autoclaved aerated concrete as a partial substitute for cement. The combination consists of sand, crushed limestone
Externí odkaz:
https://doaj.org/article/c0f5eca708f041dd951746c3b43459c6
Publikováno v:
Open Engineering, Vol 14, Iss 1, Pp 820-38 (2024)
This study aims to ascertain the effects of polymer-modified bitumen (PMB) and to utilize mineral filler with micro-silica (MS) on various properties of hot-mix asphalt (HMA). In this work, three specimens of an asphalt-concrete mixture were prepared
Externí odkaz:
https://doaj.org/article/7b3154c7771f41738de4e59c4ca0a761
Autor:
Thanon Bualuang, Peerapong Jitsangiam, Korakod Nusit, Ubolluk Rattanasak, Prinya Chindaprasirt
Publikováno v:
Case Studies in Construction Materials, Vol 21, Iss , Pp e03760- (2024)
This study evaluates styrene butadiene rubber (SBR) and styrene acrylic latex (SA) as modifiers in cement-treated subbase materials (CTSB) to enhance mechanical properties and reduce cement usage sustainably. Optimal ratios for stabilizing sub-standa
Externí odkaz:
https://doaj.org/article/03662b9cc2e0497cb04340e60f1695b7
Autor:
Adam Febriyanto Nugraha, Calvin Simon Andreas Lumban Gaol, Mochamad Chalid, Gusaimas Matahachiro Hanggoro Himawan Akbar, Havid Aqoma
Publikováno v:
Advanced Manufacturing: Polymer & Composites Science, Vol 10, Iss 1 (2024)
Multilayer plastic (MP) commonly used in food and beverage packaging is difficult to recycle due to its layered structure, resulting in its accumulation over time; the consequent environmental harm is further exacerbated by its short lifespan. This s
Externí odkaz:
https://doaj.org/article/13ddac997cb64e199d491c805e73cb4e
Publikováno v:
Case Studies in Construction Materials, Vol 20, Iss , Pp e03225- (2024)
High crack occurrences at the masonry-infilled wall partition-reinforced concrete structure interface is a problem that challenges the Brazilian construction process. Improving the mortar’s flexibility is suggested as a potential solution, but it's
Externí odkaz:
https://doaj.org/article/7fb63ce958ee47ccb660f479217fa14e
Publikováno v:
Cleaner Materials, Vol 12, Iss , Pp 100255- (2024)
The significant increase in the number of vehicles, traffic speed, and load has significantly reduced the lifespan of pavements and increased maintenance costs. Therefore, the incorporation of polymers into bituminous binders is imperative to enhance
Externí odkaz:
https://doaj.org/article/e11225ef6bf348e2a46d0006f1530253
Autor:
Yuxuan Wang, Jiehao Wu
Publikováno v:
Polymers, Vol 16, Iss 18, p 2665 (2024)
This study designs and uses water-borne epoxy resin (WBER) and curing agent (CA) to modify traditional cement-based grouting for tunnels. The purpose of this paper is to analyze the rheological and mechanical properties of composite grouting with dif
Externí odkaz:
https://doaj.org/article/9c664ca0681e4ba9b8b32488fdf25fdf