Zobrazeno 1 - 10
of 61
pro vyhledávání: '"Plasma transferred wire arc thermal spraying"'
Autor:
Abu Syed Humaun Kabir, Nicholas O’Neil
Publikováno v:
Coatings, Vol 10, Iss 864, p 864 (2020)
Coatings
Volume 10
Issue 9
Coatings
Volume 10
Issue 9
This study utilized the high-pressure pulsed waterjet process and paired it with the plasma transferred wire arc technology to develop a novel technique to remanufacture damaged engine cylinder bores. The objective of this research was to eliminate t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::85580edcbd5d7e20f7588b3f5d851499
https://www.mdpi.com/2079-6412/10/9/864
https://www.mdpi.com/2079-6412/10/9/864
Autor:
Ming Lou, Ahmet T. Alpas
Publikováno v:
Lubricants
Volume 8
Issue 1
Lubricants, Vol 8, Iss 1, p 9 (2020)
Volume 8
Issue 1
Lubricants, Vol 8, Iss 1, p 9 (2020)
This work examines friction properties of smooth-honed thermal spray (TS) low carbon steel coatings produced on an Al-9.0% Si alloy using a plasma transferred wire arc (PTWA) method and an AISI 1010 wire used as feedstock in comparison with the ASM t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a8ffda3f73b2d5d83c1f49fcf0e25650
Publikováno v:
Surface and Coatings Technology. 426:127757
This study examines the microstructure and mechanical properties of plasma transferred wire arc (PTWA) coating of typical alloyed steel, deposited on diecast aluminum alloy cylinder bores. The coating surface and microstructure were characterized in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::416b03c380fe41da69b8c1b520368f0a
https://doi.org/10.1016/j.surfcoat.2021.127757
https://doi.org/10.1016/j.surfcoat.2021.127757
Publikováno v:
Journal of Thermal Spray Technology. 26:1947-1958
Although wire flame spraying has been used for many years, there has been relatively little attention given to understanding the process dynamics. In this work, imaging of the molten wire tip, particle imaging using the Oseir Spray Watch system and p
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1c99000c78eeb3274260927c8eb8920f
https://doi.org/10.1007/s11666-017-0639-1
https://doi.org/10.1007/s11666-017-0639-1
Publikováno v:
Journal of thermal spray technology 28(1-2), 233-241 (2019). doi:10.1007/s11666-018-0781-4
Scopus-Elsevier
Scopus-Elsevier
Current developments in different industrial sectors show an increasing demand of thermally sprayed internal diameter (ID) coatings. The most recent research and development is mainly focused on commercial applications such as arc spraying (AS), atmo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d43c361bd4d2158ec68ab466631651a5
https://doi.org/10.31399/asm.cp.itsc2018p0443
https://doi.org/10.31399/asm.cp.itsc2018p0443
Autor:
Stefan Lucian Toma, Costica Bejinariu, Bogdan Florin Toma, Lucian Eva, Diana Antonia Gheorghiu, Iulian Ionita
Publikováno v:
Advanced Materials Research. 1111:211-216
Influence of the process parameters and geometry of the spraying nozzle on the properties of titanium deposits obtained in wire arc spraying. Wire arc spraying is a process in which through minor modifications of the spray parameters, they can have a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b46dc7158b8a0bc9ecbc42d7aa57ddb8
https://doi.org/10.4028/www.scientific.net/amr.1111.211
https://doi.org/10.4028/www.scientific.net/amr.1111.211
Publikováno v:
Surface and Coatings Technology. 268:115-122
Thermal spraying development for automotive industry grows since the end of the nineteen nineties. In the case of engine blocks, bores were before plated by a chemical process or liners were inserted in cylinders to ensure the tribological performanc
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::75a511873c3e692c88b037d37a84abec
https://doi.org/10.1016/j.surfcoat.2014.11.018
https://doi.org/10.1016/j.surfcoat.2014.11.018
Autor:
Thomas Schläfer, Mehmet Öte, Georg Mahlfeld, Tim Königstein, H.-W. Hoffmeister, Kirsten Bobzin, Klaus Dröder
Publikováno v:
Scopus-Elsevier
Nowadays combustion engines are the most common way to impel vehicles. Thereby losses occur, due to cooling, exhaust gas and friction. Modern engines roughly dissipate 8% of the chemical energy stored in the fuel because of friction in different trib
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a201a66f6dfaf423f2a5aa898a5f9a1d
https://doi.org/10.31399/asm.cp.itsc2017p0228
https://doi.org/10.31399/asm.cp.itsc2017p0228
Publikováno v:
International Thermal Spray Conference.
By means of In-Mold-Metal-Spraying (IMMS), metal coatings deposited by means of arc spraying process (ASP) can be transferred onto plastic parts during injection molding, thus realizing an efficient production of metallized plastic parts. Parts produ
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ba3b594b367c7eb048437253ed92a623
https://doi.org/10.31399/asm.cp.itsc2017p0654
https://doi.org/10.31399/asm.cp.itsc2017p0654
Publikováno v:
DEStech Transactions on Computer Science and Engineering.
Arc thermal spraying technology was used for the preparation of iron-based 08Mn2Si coating in automobile engine cylinder wall. Scanning electron microscopy (SEM) was used for the analysis of organizational characteristics of coating. The check agent
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::32e7e7699c67f3d3cc559fadd9c8f0b9
https://doi.org/10.12783/dtcse/iccae2016/7206
https://doi.org/10.12783/dtcse/iccae2016/7206