Zobrazeno 1 - 10
of 115
pro vyhledávání: '"Petroleum naphtha"'
Publikováno v:
IEEE Transactions on Instrumentation and Measurement. 70:1-13
This article presents a study about the rapid characterization of petroleum naphtha properties based on near-infrared (NIR) spectroscopy. The major challenge of this problem is the low prediction accuracy and poor robustness of predictive models caus
Publikováno v:
ACS Catalysis. 9:10588-10604
Isobutene is a specialty chemical used in the production of fuel additives, polymers, and other high-value products. While normally produced by steam cracking of petroleum naphtha, there is increas...
Autor:
Ayhan Demirbas, Hisham S. Bamufleh
Publikováno v:
Petroleum Science and Technology. 35:406-412
Crude oils are composed of hundreds of different hydrocarbon molecules, which are separated through the process of refining and small quantities of oxygen, sulfur, nitrogen, vanadium, nickel, and c...
Publikováno v:
Contemporary Engineering Sciences. 10:1255-1267
Publikováno v:
International Journal of Chemical Reactor Engineering. 14:1069-1080
In this contribution, the effects of ceria loading, Si/Al ratio, and reaction temperature on the catalytic performance of HZSM-5 catalysts for production of ethylene and propylene from light naphtha were investigated. The elaborated catalysts were ch
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Publikováno v:
Hungarian Journal of Industry and Chemistry. 43:39-44
The degradability of two commercially available pesticides was studied using heterogeneous photocatalytic and activated sludge treatment methods. The first pesticide contained 5% quizalofop-P-ethyl as an active ingredient and petroleum naphtha as a s
Autor:
Debajyoti Bose
Publikováno v:
International Letters of Chemistry, Physics and Astronomy. 51:87-93
Oil refining and petrochemical manufacture involves extensive heating of hydrocarbon and other fluids. Depending on the temperature required, this heating is achieved either by steam or direct heating. In the latter case, the fluid under pressure is
BTXs (benzene, toluene and xylenes), used widely as basic chemical intermediates, are separated generally from petroleum naphtha, coking naphtha, and pyrolysis gasoline. These oil fractions contain aromatic and non-aromatic hydrocarbons between C5 to
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cc1a9d04b822eecff889d3423515859b
https://doi.org/10.1016/b978-0-444-64241-7.50180-4
https://doi.org/10.1016/b978-0-444-64241-7.50180-4
Publikováno v:
RSC Advances. 5:91966-91973
A novel domino oxidative Ugi-type three-component reaction of aromatic hydrocarbons (OU-3CR) has been investigated with aromatic hydrocarbons of petroleum naphtha using two biopolymer supported MnO2 nanostructured catalysts, MnO2@cellulose–SO3H and