Zobrazeno 1 - 10
of 48
pro vyhledávání: '"Petr S. Sokolov"'
Autor:
Lydia V. Ermakova, Valentina G. Smyslova, Valery V. Dubov, Petr V. Karpyuk, Petr S. Sokolov, Ilia Yu. Komendo, Aliaksei G. Bondarau, Vitaly A. Mechinsky, Mikhail V. Korzhik
Publikováno v:
Photonics, Vol 11, Iss 8, p 695 (2024)
Dense and transparent ceramic samples of a (Gd,Y)3Al2Ga3O12:Ce scintillator were obtained by using stereolithography-based Digital Light Processing (DLP) 3D printing for compacting, subsequent burnout, and pressureless sintering. The effects of stoic
Externí odkaz:
https://doaj.org/article/fc608d281eec4b2d80c44e33643f8f6c
Autor:
Lydia V. Ermakova, Valentina G. Smyslova, Valery V. Dubov, Daria E. Kuznetsova, Maria S. Malozovskaya, Rasim R. Saifutyarov, Petr V. Karpyuk, Petr S. Sokolov, Ilia Yu. Komendo, Aliaksei G. Bondarau, Vitaly A. Mechinsky, Mikhail V. Korzhik
Publikováno v:
Ceramics, Vol 6, Iss 3, Pp 1478-1489 (2023)
The production of scintillating ceramics can require the utilization of the phosphorus compounds at certain stages of 3D-printing, such as vat polymerization, applied for the formation of green bodies before sintering. The effect of phosphorus additi
Externí odkaz:
https://doaj.org/article/2554f5f0f7c64a8a8f4e0e634d111d17
Autor:
Lydia V. Ermakova, Valery V. Dubov, Rasim R. Saifutyarov, Daria E. Kuznetsova, Maria S. Malozovskaya, Petr V. Karpyuk, Georgy A. Dosovitskiy, Petr S. Sokolov
Publikováno v:
Ceramics, Vol 6, Iss 1, Pp 43-57 (2023)
Luminescent and scintillation ceramic materials with complex shapes, which can be created by stereolithography 3D printing, are of interest for special phosphor and detector applications. Starting powders for such ceramics may possess UV absorption b
Externí odkaz:
https://doaj.org/article/e89760cc3c65406a9b082770f7907405
Publikováno v:
Materials, Vol 16, Iss 15, p 5336 (2023)
Metastable ZnO—Lin−2MeOn−1 (Me = Sc3+, Ti4+, Ta5+) solid solutions with a rock-salt structure were synthesized through the solid-state reaction of ZnO with Lin−2Men+On−1 (n = 3, 4, 5) complex oxides at 7.7 GPa and 1300–1500 K. In all inve
Externí odkaz:
https://doaj.org/article/f9ba794896f041c1b8fee4f324d3dd30
Publikováno v:
Crystals, Vol 12, Iss 5, p 744 (2022)
In the present review, new approaches for the stabilization of metastable phases of zinc oxide and the growth of ZnO single crystals under high pressures and high temperatures are considered. The problems of the stabilization of the cubic modificatio
Externí odkaz:
https://doaj.org/article/241c89b78f854e2990994d2c6c4d23e5
Autor:
Dmitrii A. Komissarenko, Petr S. Sokolov, Anastasiya D. Evstigneeva, Irina A. Shmeleva, Alexey E. Dosovitsky
Publikováno v:
Materials, Vol 11, Iss 12, p 2350 (2018)
The present study demonstrates the possibility of fabricating zirconia parts with a complex shape and internal architecture using a low-cost stereolithography-based technique. One of the critical steps in ceramics stereolithography is the preparation
Externí odkaz:
https://doaj.org/article/156baafbbb7d456ca8c90d3163ae78ea
Autor:
Korzhik, Lydia V. Ermakova, Valentina G. Smyslova, Valery V. Dubov, Daria E. Kuznetsova, Maria S. Malozovskaya, Rasim R. Saifutyarov, Petr V. Karpyuk, Petr S. Sokolov, Ilia Yu. Komendo, Aliaksei G. Bondarau, Vitaly A. Mechinsky, Mikhail V.
Publikováno v:
Ceramics; Volume 6; Issue 3; Pages: 1478-1489
The production of scintillating ceramics can require the utilization of the phosphorus compounds at certain stages of 3D-printing, such as vat polymerization, applied for the formation of green bodies before sintering. The effect of phosphorus additi
Publikováno v:
Journal of Physics and Chemistry of Solids. 180:111437
Phase stability and thermal expansion of rock-salt Me1-xZnxO (Me = Ni2+, Co2+, Fe2+, Mn2+) solid solutions synthesized at high pressures and high temperatures have been studied by synchrotron X ray diffraction in a wide (0.1 ≤ x ≤ 0.8) concentrat
Autor:
Alexey E. Dosovitsky, Petr S. Sokolov, Nikolay V. Lyskov, Alexander S. Nartov, Anastasiya D. Evstigneeva, D. A. Komissarenko, V.I. Putlayev, Pavel A. Volkov, Igor V. Slyusar, P. V. Evdokimov
Publikováno v:
Journal of the European Ceramic Society. 41:684-690
The present article aims to explore the printability of scandia-stabilized zirconia ceramic parts using desktop and low-cost DLP 3D printer. The acrylate-based homogeneous slurries with zirconia powder stabilized by 6 mol.% of Sc2O3 (6ScSZ) and 10 mo
Autor:
A. N. Baranov, Vladimir L. Solozhenko, Petr S. Sokolov, Alexandre Courac, Konstantin V. Kamenev, Felix Yu. Sharikov
Publikováno v:
Solids
Solids, MDPI, 2021, 2 (1), pp.121-128. ⟨10.3390/solids2010007⟩
Volume 2
Issue 1
Pages 7-128
Solids, 2021, 2 (1), pp.121-128. ⟨10.3390/solids2010007⟩
Solids, MDPI, 2021, 2 (1), pp.121-128. ⟨10.3390/solids2010007⟩
Volume 2
Issue 1
Pages 7-128
Solids, 2021, 2 (1), pp.121-128. ⟨10.3390/solids2010007⟩
International audience; Low-temperature heat capacities (Cp) of nanostructured rock salt (rs-ZnO) and wurtzite (w-ZnO) polymorphs of zinc oxide were measured in the 2-315 K temperature range. No significant influence of nanostructuring on Cp of w-ZnO
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b3e37b5f2d6423c1c3887cf6457c9c17
http://arxiv.org/abs/2101.05668
http://arxiv.org/abs/2101.05668