Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Peter Mulidran"'
Publikováno v:
Advances in Sciences and Technology, Vol 16, Iss 6, Pp 267-274 (2022)
The production of moulded surfaces in the engineering industry is progressing. One way to produce these surfaces is using CAM systems. As well as the use of a CAM system, the correct choice of milling strategy is also important. The aim of this paper
Externí odkaz:
https://doaj.org/article/d67a7ed882fa4fa6b2a868aefa37c4d2
Autor:
Emil Spišák, Ema Nováková-Marcinčínová, Janka Majerníková, Peter Mulidrán, Ľudmila Nováková-Marcinčínová
Publikováno v:
Polymers, Vol 15, Iss 24, p 4639 (2023)
This article is focused on a mechanical properties investigation of three types of sustainable poly lactic acid materials manufactured using the fused filament fabrication process. The purpose of this work was to study the impact of printing strategi
Externí odkaz:
https://doaj.org/article/94dc53796e2743f281ae3d7489a17f80
Autor:
Emil Spišák, Ema Nováková-Marcinčínová, Ľudmila Nováková-Marcinčínová, Janka Majerníková, Peter Mulidrán
Publikováno v:
Polymers, Vol 15, Iss 13, p 2757 (2023)
This article examines the mechanical properties and compatibility of selected composite materials produced with RP technology and the FFF—fused filament fabrication process. The article scales sophisticated modern materials based on PLA—polylacti
Externí odkaz:
https://doaj.org/article/047fcbc1ea2f49f1bdc00cf9845c7cc0
Autor:
Peter Mulidrán, Emil Spišák, Miroslav Tomáš, Janka Majerníková, Jana Bidulská, Róbert Bidulský
Publikováno v:
Materials, Vol 16, Iss 2, p 811 (2023)
Formability and its prediction of high-strength steels is an important research subject for forming specialists and researchers in this field. Springback and its accurate prediction of high-strength steels are very common issues in metal forming proc
Externí odkaz:
https://doaj.org/article/dad7481874df441dba6d4d5793341209
Publikováno v:
Metals, Vol 8, Iss 6, p 435 (2018)
Numerical simulation is an important tool which can be used for designing parts and production processes. Springback prediction, with the use of numerical simulation, is essential for the reduction of tool try-outs through the design of the forming t
Externí odkaz:
https://doaj.org/article/3905f5b9caee43e9900d495d55e14f26
Publikováno v:
Advances in Sciences and Technology, Vol 12, Iss 3, Pp 168-172 (2018)
The paper deals with the forming analysis of continuously annealed steel sheets double reduced. Six different sheet metal grades were evaluated in the paper, thickness was in the range from 0.15 to 0.175 mm. Described are the used methods and the res
Externí odkaz:
https://doaj.org/article/032d9f33b0e948379f9c230acdd96a56
Publikováno v:
MM Science Journal. 2021:4824-4829
The contribution deals with the optimization of the forming process with the use of FE analysis. The impact of the planar anisotropy and friction coefficient on the drawing process was evaluated in the numerical simulation. Optimization of metal blan
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c28f1a356d6aebbdf3d565ea46ad3b30
https://doi.org/10.17973/mmsj.2021_10_2021096
https://doi.org/10.17973/mmsj.2021_10_2021096
Publikováno v:
MM Science Journal. 2021:4847-4852
The article deals with contact and non-contact evaluation of surface roughness created by water jet cutting technology (AWJ). Non-contact surface measurement was performed using an LPM laser profilometer. The values measured by the laser profilometry
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::277d9e3a333699121019d68d449e8a01
https://doi.org/10.17973/mmsj.2021_10_2021097
https://doi.org/10.17973/mmsj.2021_10_2021097
Publikováno v:
Acta Metallurgica Slovaca. 27:103-108
In this work, the influence of material models used in the FEM simulation on the springback prediction is investigated. The interest of this paper is to extend the knowledge base regarding springback predictions in numerical simulation. The springbac
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2db6f3c1704e4198f7dca6e22b3919a0
https://doi.org/10.36547/ams.27.3.899
https://doi.org/10.36547/ams.27.3.899
Publikováno v:
Acta Metallurgica Slovaca. 26:49-53
The quality of the sheared surface when blanking, also known as die-cutting, is the result of several factors. Based on current knowledge about blanking, the following technological parameters – shear gap size, blunting of the shearing tool, lubric
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0f1c5481cd852458878f03c263688d14
https://doi.org/10.36547/ams.26.2.545
https://doi.org/10.36547/ams.26.2.545