Zobrazeno 1 - 10
of 22
pro vyhledávání: '"Pejo Konjatić"'
Publikováno v:
Applied Sciences, Vol 14, Iss 18, p 8390 (2024)
The aim of this study is to provide a solution for the plastic limit pressure and stress intensity factor of the elbows containing a part-through axial semi-elliptical crack by considering various crack sizes. The supporting system and loading condit
Externí odkaz:
https://doaj.org/article/391c57ab7da841fa9aa931f61d17cfa8
Publikováno v:
Tehnički Glasnik, Vol 17, Iss 3, Pp 324-331 (2023)
In this paper, the dynamic behavior of a rotor kit with two identical disks located between the plain bearings was analyzed. Modal and harmonic analysis of this rotor kit configuration were performed in the Ansys software package. To calibrate the be
Externí odkaz:
https://doaj.org/article/053add5bbcaa4292ac93aa03c7fd40fc
Publikováno v:
Tehnički Vjesnik, Vol 30, Iss 5, Pp 1645-1651 (2023)
This article focused on the experimental and statistical analysis of the mechanical properties of dog-bone samples manufactured by fused deposition modelling (FDM). Two identical materials were examined, i.e., Onyx with carbon fiber but from differen
Externí odkaz:
https://doaj.org/article/033adb9c03cb4078951083d682651d11
Publikováno v:
Tehnički Vjesnik, Vol 30, Iss 6, Pp 1776-1783 (2023)
In this paper, the shrink fit between the conical disk and the rotor shaft of a steam turbine was analysed with the aim of determining the rotor speed at which this fit is lost. The analysis was carried out numerically using the finite element method
Externí odkaz:
https://doaj.org/article/33afdf3a3c214504bc1ff21ed96cce17
Publikováno v:
Applied Sciences, Vol 13, Iss 24, p 13300 (2023)
The transmission of power and motion in road vehicles with internal combustion engines is achieved by different design variants of differential transmissions. The open differential transmission (ODT) is installed to a greater extent in passenger cars
Externí odkaz:
https://doaj.org/article/a9c2ca2e5c9d4763bbfbb8f07b05697b
Publikováno v:
Tehnički Vjesnik, Vol 29, Iss 4, Pp 1080-1088 (2022)
This research reveals the influence of different purging conditions on the fusion zone dimensions and shape for stationary autogenous TIG welding of 316L stainless steel. Welding experiments were performed for unpurged and purged weld root side for 7
Externí odkaz:
https://doaj.org/article/1394ca6dd543444c84505e99a227875f
Autor:
Đorđe Đurđević, Nina Anđelić, Taško Maneski, Vesna Milošević-Mitić, Andrijana Đurđević, Pejo Konjatić
Publikováno v:
Tehnički Vjesnik, Vol 26, Iss 2, Pp 380-384 (2019)
The present paper describes numerical and experimental methodology for the analysis of stress and deformation state in structural elements with geometrical discontinuities. The research is based on structural elements of the connecting lug type. The
Externí odkaz:
https://doaj.org/article/f95467bf13444dd5b806b81259f85e05
Publikováno v:
Materials, Vol 15, Iss 214, p 214 (2022)
Materials
Materials; Volume 15; Issue 1; Pages: 214
Materials
Materials; Volume 15; Issue 1; Pages: 214
The objective of this work was to investigate the fracture behavior of a heterogeneous I-shaped welded joint in the context of yield load solutions. The weld was divided into two equal parts, using the metal with the higher yield strength and the met
Publikováno v:
Materials
Materials, Vol 14, Iss 7491, p 7491 (2021)
Materials; Volume 14; Issue 24; Pages: 7491
Materials, Vol 14, Iss 7491, p 7491 (2021)
Materials; Volume 14; Issue 24; Pages: 7491
The C* integral for the compact tension (CT) specimen is calculated using the estimation equation in ASTM E1457-15. This equation was developed based on the assumption of material homogeneity and is not applicable to a welded CT specimen. In this pap
Publikováno v:
Materials; Volume 15; Issue 5; Pages: 1858
Boronizing is a thermochemical treatment performed to produce hard and wear-resistant surface layers. In order to control the process and obtain boride layers with the desired properties, it is very important to know how the boronizing parameters and