Zobrazeno 1 - 10
of 70
pro vyhledávání: '"Pavel Kudrna"'
Publikováno v:
Vacuum. 205:111413
Publikováno v:
Vacuum
The Thermionic Vacuum Arc (TVA) is an original deposition method using a combination of anodic arc and powerful electron gun system (up to 600 W) for the growth of thin films from solid precursors under a vacuum of 10−4 Pa. The advantage of this te
Publikováno v:
Materials
Volume 13
Issue 8
Materials, Vol 13, Iss 1797, p 1797 (2020)
Volume 13
Issue 8
Materials, Vol 13, Iss 1797, p 1797 (2020)
In this paper, the prospects of iron oxide films and their sulfidation for dye-sensitized solar cells (DSSC) are reviewed. Iron oxide thin films were prepared by hollow cathode plasma jet (HCPJ) sputtering, with an admixture of oxygen in the argon wo
Publikováno v:
Coatings, Vol 10, Iss 3, p 211 (2020)
This review summarizes the more-than-25-years of development of the so-called thermionic vacuum arc (TVA). TVA is an anodic arc discharge in vapors of the material to be deposited; the energy for its melting is delivered by means of a focused electro
Autor:
Vaclav Nevrly, Zdenek Rafaj, Libor Juha, Z. Zelinger, Milan Tichy, Jorge J. Rocca, Pavel Kudrna, Michal Dostál, Jan Wild, Václav Nehasil, Peter Pira, Petr Bitala, Ludek Vysin, Stanislav Daniš, Tomáš Burian
Publikováno v:
Nukleonika, Vol 65, Iss 4, Pp 205-210 (2020)
Extreme ultraviolet (XUV) capillary-discharge lasers (CDLs) are a suitable source for the efficient, clean ablation of ionic crystals, which are obviously difficult to ablate with conventional, long-wavelength lasers. In the present study, a single c
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8cb5704412f66842ad7dcb15dde84dfc
http://hdl.handle.net/10084/142435
http://hdl.handle.net/10084/142435
Publikováno v:
Journal of Alloys and Compounds. 869:159364
The Laser-induced Thermionic Vacuum Arc method was applied to optimize magnesium-silver (Mg:Ag) alloys, which can be potentially used as stable metallic cathodes for optoelectronic devices. Besides lowering the cathode work function given by the magn
Autor:
Gabriel Prodan, Ivan Khalakhan, Milan Tichý, Rodica Vladoiu, R. Perekrestov, Pavel Kudrna, Stanislav Daniš
Publikováno v:
Surface and Coatings Technology. 291:123-129
TiO2 thin films with developed structure were deposited by means of a hollow cathode plasma jet (HCPJ) in a DC regime with a supporting anode. The influence of the plasma temperature on the surface morphology and crystalline structure of the thin fil
Autor:
Jan Wild, Zdeněk Zelinger, Michal Střižík, Pavel Kubát, Peter Pira, Václav Nevrlý, Eva Grigorová, Petr Bitala, Pavel Kudrna
Publikováno v:
Perspectives in Science, Vol 7, Iss C, Pp 184-189 (2016)
Summary This study describes the modification of a standardised cup-burner apparatus. The replacement of the original glass chimney is performed by shielding a nitrogen co-flow enabled measurement at a wavelength of 3.9 μm. This modification, togeth
Publikováno v:
IEEE Transactions on Plasma Science. 43:29-34
A heated emissive probe is a smart diagnostic tool for acquisition of the plasma potential in the discharge and in the plume of a Hall thruster. However, measurements of high-frequency oscillations of the potential require a specific electrical circu
Publikováno v:
Journal of Applied Physics. 126:023301
We present a comparatively simple-to-apply in situ diagnostic suitable for determining the dielectric properties of nonconducting and semiconducting thin films during plasma-aided deposition. The method is based on measurement of the impedance spectr