Zobrazeno 1 - 10
of 30
pro vyhledávání: '"Pavel Bulejko"'
An analysis on energy demands in airborne particulate matter filtration using hollow-fiber membranes
Autor:
Pavel Bulejko
Publikováno v:
Energy Reports, Vol 7, Iss , Pp 2727-2736 (2021)
This work analyzes energy requirements for drawing the air through a hollow-fiber membrane (HFM) during air filtration. Polypropylene HFMs varying in inner fiber diameter (230 and 470μm) were used to separate the ASHRAE A2 fine test dust from a simu
Externí odkaz:
https://doaj.org/article/be115e0f3a99498b9598d772289465d3
Publikováno v:
Membranes, Vol 11, Iss 7, p 467 (2021)
In this work, we tried to analyze dust loading behavior of polypropylene hollow fiber membranes using average pressure drop models. Hollow fiber membranes varying in fiber diameter were loaded with a standardized test dust to simulate particle-pollut
Externí odkaz:
https://doaj.org/article/1a14dd0c96ee4e37b84d01bc0b3cf5bc
Autor:
Pavel Bulejko
Publikováno v:
Nanomaterials, Vol 8, Iss 6, p 447 (2018)
Hollow-fiber membranes (HFMs) have been widely applied to many liquid treatment applications such as wastewater treatment, membrane contactors/bioreactors and membrane distillation. Despite the fact that HFMs are widely used for gas separation from g
Externí odkaz:
https://doaj.org/article/383322d932c24bbea9d858013f29a588
Autor:
Pavel Bulejko, Nikola Šuleková, Jaroslav Vlasák, Antti Häkkinen, Tomáš Svěrák, Teemu Kinnarinen, Ritva Tuunila
Publikováno v:
Powder Technology. 395:556-561
The aim of this work is to study changes in the properties of aqueous corundum suspensions during ultrafine grinding with and without the addition of an activator. Corundum suspensions were prepared in distilled water in a ratio of 1:5 with and witho
Autor:
Eliška Stránská, Pavel Bulejko
Publikováno v:
Ionics. 25:4251-4263
Moisture content in a strongly hydrophilic ion-exchange resin is one of the key parameters in commercial production of ion-exchange membranes. This work tried to clarify the effect of moisture content in an anion-exchange resin (AER) on the structure
Publikováno v:
Engineering Failure Analysis. 131:105895
This work analyzes resistance of polyamide hollow fibers used for heat exchangers against extremely high pressures. Hollow fibers made of five different commercially available polyamides and one type of polyphenylene sulfide were tested at different
Publikováno v:
Powder Technology. 340:344-353
This work aimed to determine filtration performance of polypropylene hollow-fiber membranes in removing submicron particles from air. Experiments were performed in a chamber simulating dust environment with synthetic submicron-size particles (microni
Autor:
Pavel Bulejko, Matěj Březina, Lucie Galvánková, Pavel Kejik, Lukáš Kalina, Vlastimil Bílek, Jan Hajzler
Publikováno v:
Solid State Phenomena. 276:179-184
This paper studies possibilities of alkali-activated fly ash (AAFA) for the preparation of systems with preserved certain porosity level. Such systems would be used for example as filtration barriers, which are commonly prepared by both energetically
Publikováno v:
Separation and Purification Technology. 197:122-128
This work aimed to determine filtration performance of polypropylene hollow-fibre membranes (HFMs) for removing submicron particles from air. Experiments were performed in a glass chamber supplied with a nanoaerosol particles formed by burning incens
Autor:
Pavel Bulejko, Eliška Stránská
Publikováno v:
Materials Chemistry and Physics. 205:470-479
This work deals with the influence of moisture content of cation-exchange resin (CER) on the properties of prepared cation-exchange membranes (CEMs). CER was dried and moistened to 2, 4, 6, 8, 10 and 25% and then milled using a vibratory mill. The CE