Zobrazeno 1 - 8
of 8
pro vyhledávání: '"Paulina Buk"'
Publikováno v:
Challenging Glass Conference Proceedings, Vol 9 (2024)
In the building industry, different types of glass edges are used depending on their application and function. A widespread assumption is that the edge strength increases with the degree of optical finishing. This corresponds with the European standa
Externí odkaz:
https://doaj.org/article/c3a96f0fa9cd4efa9fa4667ed06c161a
Publikováno v:
Challenging Glass Conference Proceedings, Vol 9 (2024)
The demand for versatile and visually appealing glazed structures has been increasing in recent years. To meet contemporary architectural needs, a wider range of functionalities is required, including smart, bendable and thin laminated glazing. In pa
Externí odkaz:
https://doaj.org/article/d4f448b3f1c44d7cadb755f4819f2d3a
Publikováno v:
Energy. 188:116062
The main aim of this work was to determine the influence of KCl-rich ash deposits on 10CrMo9-10 steel oxidation rate. Two agricultural biomass samples: oat and rye straw, clean and doped with KCl were tested in this study. The addition of KCl does no
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8faa49a3d316124aeb19992329b7c1d9
https://doi.org/10.1016/j.energy.2019.116062
https://doi.org/10.1016/j.energy.2019.116062
Autor:
Paulina Bukieda, Bernhard Weller
Publikováno v:
Challenging Glass Conference Proceedings, Vol 8 (2022)
The inspection of glass edges is gaining in importance in research, as the strength of a glass edge has been found to be highly dependent on its processing. Glass edges are produced by cutting. Depending on their type, they may be additionally seamed
Externí odkaz:
https://doaj.org/article/b4fea0c84daf4cbc98413535ae149446
Publikováno v:
Challenging Glass Conference Proceedings, Vol 7, Iss 1 (2020)
The strength of thermally toughened glass is regulated in EN 12150-1 for fully tempered glass (FTG) and EN 1863-1 for heat-strengthened glass (HSG). The manufacturer has to prove the strength by four-point bending tests based on EN 1288- 3. A measure
Externí odkaz:
https://doaj.org/article/0f6fa2564bf244799b7d44f0f72fd636
Publikováno v:
Challenging Glass Conference Proceedings, Vol 7, Iss 1 (2020)
Glass edges result from cutting glass sheets and a further optional finishing. The mechanical interference into the brittle material glass causes flaws and cracks at the edge surface. Those defects have an influence on the strength of the whole glazi
Externí odkaz:
https://doaj.org/article/4b7c9a56b9744c4787faec54903db90e
Publikováno v:
Challenging Glass Conference Proceedings, Vol 6, Iss 1 (2018)
Research has shown that the general approach to determine the bending strength of thermally curved glass with the aid of the four-point bending test for flat glass according to EN 1288-3 is applicable. At the moment, however, there is no statutory me
Externí odkaz:
https://doaj.org/article/019ec75b7d4b4378a47906c3f16c5530
