Zobrazeno 1 - 10
of 29
pro vyhledávání: '"Paul Rostron"'
Autor:
Boohyun An, Pyungyeon Cho, Remilekun A. Shittu, Tae-Yeon Kim, Paul Rostron, Akram AlFantazi, Yongsun Yi
Publikováno v:
Energies, Vol 15, Iss 15, p 5581 (2022)
Chloride diffusion through concrete is influenced by harsh environmental conditions such as high ambient temperature and relative humidity. This paper examined the influence of temperature gradient on chloride diffusion in concrete under high ambient
Externí odkaz:
https://doaj.org/article/4b93804bcb204111ac679d2796153054
Autor:
Muhammed S. Parancheerivilakkathil, Shahid Parapurath, Sami Ainane, Yit Fatt Yap, Paul Rostron
Publikováno v:
Applied Sciences, Vol 12, Iss 5, p 2530 (2022)
The presence of CO2, sand, and water in oil and gas reservoirs causes erosion–corrosion leading to material degradation in pipelines and fluid handling equipment that results in increasing maintenance and repair costs and a decrease in production.
Externí odkaz:
https://doaj.org/article/07920b83b5314e38912741153845121c
Publikováno v:
Applied Sciences, Vol 11, Iss 1, p 444 (2021)
Low-carbon steel is widely used in industrial pipelines, and corrosion studies are focused mostly on erosion-corrosion, its prediction and control. In this paper, the corrosion rate in pipelines is modeled using a flow loop and measured by linear pol
Externí odkaz:
https://doaj.org/article/1103c263f6ce4675a8dfb301721bee0d
Publikováno v:
Sensors, Vol 20, Iss 3, p 684 (2020)
Oil flowlines, the first “pipeline” system connected to the wellhead, are pipelines that are 5 to 30.5 cm (two to twelve inches) in diameter, most susceptible to corrosion, and very difficult to inspect. Herein, an external corrosion detection se
Externí odkaz:
https://doaj.org/article/593ee3288f28439291e3a0f885820943
Publikováno v:
Sensors, Vol 18, Iss 3, p 815 (2018)
A monitoring solution was developed for detection of material loss in metals such as carbon steel using the force generated by permanent magnets in addition to the optical strain sensing technology. The working principle of the sensing system is rela
Externí odkaz:
https://doaj.org/article/d70ce17803354135ab6a9cb8397084e3
Autor:
Paul Rostron, Sonia Kasshanna
Publikováno v:
International Journal of Corrosion, Vol 2015 (2015)
Two different naturally occurring vegetable oils, Cress seed oil, and Linseed oil were chemically modified via novel one pot synthesis to produce fatty acid derived amides. These were characterized by their ability to prevent corrosion of carbon stee
Externí odkaz:
https://doaj.org/article/d5530948f0894ad99a9efe7c289a7e39
Publikováno v:
Sensors, Vol 17, Iss 6, p 1238 (2017)
External corrosion was identified as one of the main causes of pipeline failures worldwide. A solution that addresses the issue of detecting and quantifying corrosivity of environment for application to existing exposed pipelines has been developed.
Externí odkaz:
https://doaj.org/article/7bd4265752cf40709d557c423dcf392c
Publikováno v:
Journal of Materials Science. 54:9213-9221
The application of scanning electrochemical microscopy has increased recently in corrosion studies. The electrochemical activity image is usually generated indirectly by measuring the rate of reaction of a mediator which is not a part of the studied
Publikováno v:
Sensors
Volume 20
Issue 3
Sensors, Vol 20, Iss 3, p 684 (2020)
Sensors (Basel, Switzerland)
Volume 20
Issue 3
Sensors, Vol 20, Iss 3, p 684 (2020)
Sensors (Basel, Switzerland)
Oil flowlines, the first &ldquo
pipeline&rdquo
system connected to the wellhead, are pipelines that are 5 to 30.5 cm (two to twelve inches) in diameter, most susceptible to corrosion, and very difficult to inspect. Herein, an external corro
pipeline&rdquo
system connected to the wellhead, are pipelines that are 5 to 30.5 cm (two to twelve inches) in diameter, most susceptible to corrosion, and very difficult to inspect. Herein, an external corro
Publikováno v:
Progress in Organic Coatings. 124:165-174
Commercial coatings based on epoxy and amine hardener and organic solvent were prepared to investigate the effect of organic solvent on coating properties, their mechanical property and curing kinetics were discussed in terms of different solvent con