Zobrazeno 1 - 10
of 66
pro vyhledávání: '"Pascal Nicolay"'
Publikováno v:
Applied Sciences, Vol 14, Iss 16, p 7419 (2024)
In this study, we investigate an innovative option for the ecological management of agricultural land. The focus is on the use of phase change materials (PCMs) for passive temperature regulation in greenhouses and fruit crop fields in order to reduce
Externí odkaz:
https://doaj.org/article/d243e5815d39470f9a58d2eeceaa3fa1
Publikováno v:
Sensors, Vol 24, Iss 12, p 3854 (2024)
Nowadays, 3D printing is becoming an increasingly common option for the manufacturing of sensors, primarily due to its capacity to produce intricate geometric shapes. However, a significant challenge persists in integrating multiple materials during
Externí odkaz:
https://doaj.org/article/d1d45bebad424fe695ff398ceb748167
Publikováno v:
Applied Sciences, Vol 13, Iss 16, p 9289 (2023)
The transition to sustainable or green(er) cities requires the development and implementation of many innovative technologies. It is vital to ensure that these technologies are themselves as sustainable and green as possible. In this context, smart m
Externí odkaz:
https://doaj.org/article/ea4ebf1bf01e4b669bceb30e45c59b90
Autor:
Clarissa Becker, Hannes Oberlercher, Rosmarie Brigitte Heim, Günter Wuzella, Lisa-Marie Faller, Franz Oswald Riemelmoser, Pascal Nicolay, Frédéric Druesne
Publikováno v:
Applied Sciences, Vol 11, Iss 23, p 11315 (2021)
The material properties of 3D printed continuous fiber composites have been studied many times in the last years. However, only a minimal number of samples were used to determine the properties in each of the reported studies. Moreover, reported resu
Externí odkaz:
https://doaj.org/article/da169f0e21d24db8b61ee688545672ce
Publikováno v:
International Journal of Smart and Nano Materials, Vol 8, Iss 2-3, Pp 95-109 (2017)
This paper presents a FEM analysis of a membrane-based Surface Acoustic Wave (SAW) sensor. The sensor is a 2.45GHz Reflective Delay Line (R-DL) based on Lithium Niobate (LiNbO3). As the wave propagation time is much smaller than the typical time cons
Externí odkaz:
https://doaj.org/article/6394b86094a74df399db772947a427a6
Autor:
Pascal Nicolay, Martin Lenzhofer
Publikováno v:
Sensors, Vol 14, Iss 2, Pp 3065-3076 (2014)
This paper will discuss the results obtained with a first prototype of a completely passive and wireless low pressure sensor. The device is a heat conductivity gauge, based on a wireless and passive SAW temperature sensor. The required heating energy
Externí odkaz:
https://doaj.org/article/ff790d31803943b0b00fd92297ce20b0
Autor:
Sofia Toto, Pascal Nicolay, Gian Luca Morini, Michael Rapp, Jan G. Korvink, Juergen J. Brandner
Publikováno v:
Sensors, Vol 19, Iss 14, p 3243 (2019)
The authors wish to make the following erratum to Reference [...]
Externí odkaz:
https://doaj.org/article/299be840f94e4a298148ccd37511df1c
Autor:
Sofia Toto, Pascal Nicolay, Gian Luca Morini, Michael Rapp, Jan G. Korvink, Juergen J. Brandner
Publikováno v:
Sensors, Vol 19, Iss 10, p 2421 (2019)
Pressure is a critical parameter for a large number of industrial processes. The vacuum industry relies on accurate pressure measurement and control. A new compact wireless vacuum sensor was designed and simulated and is presented in this publication
Externí odkaz:
https://doaj.org/article/f48005a7b50e45f28e4e2ef812fac1d4
Publikováno v:
Proceedings, Vol 2, Iss 13, p 730 (2018)
Passive and wireless SAW sensors can operate in extreme environment. However, there is no mass-market application for this technology yet, due notably to the lack of an adequate sensor housing solution. Package-less SAW sensors are therefore promisin
Externí odkaz:
https://doaj.org/article/9ab4a4d466514d0c9e2f020e2bc8460a
Autor:
Pascal Nicolay, Hugo Chambon, Gudrun Bruckner, Christian Gruber, Sylvain Ballandras, Emilie Courjon, Matthias Stadler
Publikováno v:
Sensors, Vol 18, Iss 10, p 3482 (2018)
Surface Acoustic Wave (SAW) sensors are small, passive and wireless devices. We present here the latest results obtained in a project aimed at developing a SAW-based implantable pressure sensor, equipped with a well-defined, 30 μm-thick, 4.7 mm-in-d
Externí odkaz:
https://doaj.org/article/18c727edd89147d5bb42c4410dec0f3a