Zobrazeno 1 - 10
of 10
pro vyhledávání: '"Pälvi Apilo"'
Autor:
César Vega-Colado, Belén Arredondo, Juan Carlos Torres, Eduardo López-Fraguas, Ricardo Vergaz, Diego Martín-Martín, Gonzalo del Pozo, Beatriz Romero, Palvi Apilo, Xabier Quintana, Morten A. Geday, Cristina de Dios, José Manuel Sánchez-Pena
Publikováno v:
Sensors, Vol 18, Iss 9, p 3045 (2018)
Visible light communication systems can be used in a wide variety of applications, from driving to home automation. The use of wearables can increase the potential applications in indoor systems to send and receive specific and customized information
Externí odkaz:
https://doaj.org/article/0c2d86b5bb584a319b3d94de7d23dcab
Autor:
Marja Vilkman, Riccardo Po, Kaisa Leena Väisänen, Gianni Corso, Tapio Pernu, Andrea Bernardi, Pälvi Apilo, Jukka Hast, Janne Ruokolainen, Mari Ylikunnari, Jani Seitsonen, Santtu Heinilehto, Marja Välimäki
Publikováno v:
ACS Applied Energy Materials
Vilkman, M, Väisänen, K-L, Apilo, P, Po, R, Välimäki, M, Ylikunnari, M, Bernardi, A, Pernu, T, Corso, G, Seitsonen, J, Heinilehto, S, Ruokolainen, J & Hast, J 2018, ' Effect of the Electron Transport Layer on the Interfacial Energy Barriers and Lifetime of R2R Printed Organic Solar Cell Modules ', ACS Applied Energy Materials, vol. 1, no. 11, pp. 5977-5985 . https://doi.org/10.1021/acsaem.8b01040
Vilkman, M, Väisänen, K-L, Apilo, P, Po, R, Välimäki, M, Ylikunnari, M, Bernardi, A, Pernu, T, Corso, G, Seitsonen, J, Heinilehto, S, Ruokolainen, J & Hast, J 2018, ' Effect of the Electron Transport Layer on the Interfacial Energy Barriers and Lifetime of R2R Printed Organic Solar Cell Modules ', ACS Applied Energy Materials, vol. 1, no. 11, pp. 5977-5985 . https://doi.org/10.1021/acsaem.8b01040
Understanding the phenomena at interfaces is crucial for producing efficient and stable flexible organic solar cell modules. Minimized energy barriers enable efficient charge transfer, and good adhesion allows mechanical and environmental stability a
Autor:
Gonzalo del Pozo, Eduardo López-Fraguas, B. Arredondo, Diego Martín-Martín, Juan Carlos Torres, Cristina de Dios, Ricardo Vergaz, Morten Andreas Geday, César Vega-Colado, Xabier Quintana, José Manuel Sánchez-Pena, Pälvi Apilo, Beatriz Romero
Publikováno v:
Sensors (Basel, Switzerland)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
instname
Sensors
Volume 18
Issue 9
Vega-Colado, C, Arredondo, B, Torres, J C, López-Fraguas, E, Vergaz, R, Martín-Martín, D, Del Pozo, G, Romero, B, Apilo, P, Quintana, X, Geday, M A, de Dios, C & Sánchez-Pena, J M 2018, ' An all-organic flexible visible light communication system ', Sensors, vol. 18, no. 9, 3045 . https://doi.org/10.3390/s18093045
Sensors, ISSN 1424-8220, 2018-09-12, Vol. 18, No. 3045
Archivo Digital UPM
Sensors, Vol 18, Iss 9, p 3045 (2018)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
instname
Sensors
Volume 18
Issue 9
Vega-Colado, C, Arredondo, B, Torres, J C, López-Fraguas, E, Vergaz, R, Martín-Martín, D, Del Pozo, G, Romero, B, Apilo, P, Quintana, X, Geday, M A, de Dios, C & Sánchez-Pena, J M 2018, ' An all-organic flexible visible light communication system ', Sensors, vol. 18, no. 9, 3045 . https://doi.org/10.3390/s18093045
Sensors, ISSN 1424-8220, 2018-09-12, Vol. 18, No. 3045
Archivo Digital UPM
Sensors, Vol 18, Iss 9, p 3045 (2018)
Visible light communication systems can be used in a wide variety of applications, from driving to home automation. The use of wearables can increase the potential applications in indoor systems to send and receive specific and customized information
Autor:
Marja Vilkman, Jukka Hast, Rico Meitzner, Riccardo Po, Andrea Bernardi, Gianni Corso, Roland Roesch, Pälvi Apilo, Marja Välimäki, Henning Richter, Kaisa-Leena Väisänen, Ulrich S. Schubert, Mari Ylikunnari, Harald Hoppe
Publikováno v:
Apilo, P, Välimäki, M, Po, R, Väisänen, K L, Richter, H, Ylikunnari, M, Vilkman, M, Bernardi, A, Corso, G, Hoppe, H, Roesch, R, Meitzner, R, Schubert, U S & Hast, J 2018, ' Fully Roll-to-Roll Printed P3HT/Indene-C60-Bisadduct Modules with High Open-Circuit Voltage and Efficiency ', Solar RRL, vol. 2, no. 3, 1700160 . https://doi.org/10.1002/solr.201700160
Indene-C60-bisadduct (ICBA) can represent an excellent choice as an acceptor of organic solar cells due to the, at most, similar cost, higher efficiency, and higher open-circuit voltage (VOC) obtained in small-scale devices compared to phenyl[60]buty
Autor:
Marja Vilkman, J. Tuominen, J. Puustinen, Riccardo Po, Elina Jansson, Gianni Corso, Andrea Bernardi, Marja Välimäki, Jukka Hast, Pälvi Apilo, Mari Ylikunnari
Publikováno v:
Välimäki, M, Apilo, P, Po, R, Jansson, E, Bernardi, A, Ylikunnari, M, Vilkman, M, Corso, G, Puustinen, J, Tuominen, J & Hast, J 2015, ' R2R-printed inverted OPV modules : Towards arbitrary patterned designs ', Nanoscale, vol. 7, no. 21, pp. 9570-9580 . https://doi.org/10.1039/C5NR00204D
We describe the fabrication of roll-to-roll (R2R) printed organic photovoltaic (OPV) modules using gravure printing and rotary screen-printing processes. These two-dimensional printing techniques are differentiating factors from coated OPVs enabling
Autor:
Jukka Hast, Marja Vilkman, Marja Välimäki, Gianni Corso, Pälvi Apilo, Riccardo Po, Anderea Bernardi, Mari Ylikunnari
Publikováno v:
Vilkman, M, Apilo, P, Välimäki, M, Ylikunnari, M, Bernardi, A, Po, R, Corso, G & Hast, J 2015, ' Gravure-printed ZnO in fully roll-to-roll printed inverted organic solar cells : Optimization of adhesion and performance ', Energy Technology, vol. 3, no. 4, pp. 407-413 . https://doi.org/10.1002/ente.201402155
We present a gravure printing process for zinc oxide (ZnO) nanoparticle ink to be used as a hole-blocking layer in inverted organic solar cells, enabling the production of patterned devices with freedom of design. The printability of the ink is optim
Autor:
Bérenger Roth, Christoph J. Brabec, Roar R. Søndergaard, Eva Bundgaard, Thomas Rieks Andersen, Marja Vilkman, Arnulf Scheel, Jon Eggert Carlé, Pälvi Apilo, Frederik C. Krebs, George D. Spyropoulos, Stefan Schumann, Owen R. Lozman, Noella Lemaitre, Martin Helgesen, Henrik Friis Dam, Mathilde Legros, Stephane Berny, Suren A. Gevorgyan, Tayebeh Ameri, Jens Adams, Francesco Livi
Publikováno v:
Livi, F, Søndergaard, R R, Andersen, T R, Roth, B, Gevorgyan, S, Dam, H F, Carlé, J E, Helgesen, M, Spyropoulos, G D, Ameri, T, Brabec, C J, Legros, M, Lemaitre, N, Berny, S, Lozman, O R, Schumann, S, Scheel, A, Apilo, P, Vilkman, M, Bundgaard, E & Krebs, F C 2015, ' Round-robin studies on roll-processed ITO-free organic tandem solar cells combined with inter-laboratory stability studies ', Energy Technology, vol. 3, no. 4, pp. 423-427 . https://doi.org/10.1002/ente.201402095
Roll-processed, indium tin oxide (ITO)-free, flexible, organic tandem solar cells and modules have been realized and used in round-robin studies as well as in parallel inter-laboratory stability studies. The tandem cells/modules show no significant d
Autor:
Pälvi Apilo, Markus Tuomikoski, Jukka Hast, Marja Välimäki, Riikka Suhonen, Tiina Maaninen, Arto Maanineny, Kaisa-Leena Väisänen, Ari Alastalo
Publikováno v:
SID Symposium Digest of Technical Papers. 44:192-195
Organic light emitting diodes (OLED) are developing rapidly and provide a huge market potential for signage, lighting and display applications. Cost efficient manufacturing of OLED components on different flexible substrates is under heavy investigat
Publikováno v:
Reinhardt, J, Apilo, P, Zimmermann, B, Rousu, S & Würfel, U 2015, ' Determining the photocurrent of individual cells within an organic solar module by LBIC and the filtering approach : Experiments and simulations ', Solar Energy Materials and Solar Cells, vol. 134, pp. 157-164 . https://doi.org/10.1016/j.solmat.2014.11.032
Light beam induced current (LBIC) measurements of ITO-free organic photovoltaic modules with monolithic series connection are presented. Selective bias illumination is used to extract the light beam generated current from the module. A large variatio
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9243e4ac0c150229441684e58470852c
https://cris.vtt.fi/en/publications/bd6ccce6-e2b1-464f-b307-f719e7a21918
https://cris.vtt.fi/en/publications/bd6ccce6-e2b1-464f-b307-f719e7a21918
Autor:
Andrea Bernardi, Pälvi Apilo, Gianni Corso, Riccardo Po, Marja Välimäki, Jukka Hast, Marja Vilkman, Mari Ylikunnari
Publikováno v:
Energy Technology. 3:443-443