Zobrazeno 1 - 10
of 6 403
pro vyhledávání: '"Oxidation behavior"'
Publikováno v:
工程科学学报, Vol 46, Iss 10, Pp 1826-1833 (2024)
TNM(Ti–43Al–4Nb–1Mo–0.1B) titanium aluminum alloy has low density, excellent mechanical properties at high temperatures, and good deformation ability at high temperatures and is applied as a new-generation aeroengine low-pressure turbine blad
Externí odkaz:
https://doaj.org/article/cab1632bfe72448ba5d833810b0d4d48
Publikováno v:
Journal of Materials Research and Technology, Vol 32, Iss , Pp 185-195 (2024)
The high temperature oxidation behavior of Fe–36Ni Invar alloy in the forged billet stage and hot rolled rod stage in the compressed air atmosphere has been systematically studied. The results show that the oxide layer can be divided into the exter
Externí odkaz:
https://doaj.org/article/5ff844cad5b34fd280ff40a4e1d19832
Publikováno v:
Journal of Materials Research and Technology, Vol 31, Iss , Pp 739-746 (2024)
Oxidation behaviors of a Ni–Cr–W based superalloy were investigated in terms of microstructural characteristics. It was found that the specimens with small grains present a better oxidation resistance owing to their higher density of grain bounda
Externí odkaz:
https://doaj.org/article/fbb43b6173e148bcb27b7303ec952ae7
Publikováno v:
Anti-Corrosion Methods and Materials, 2024, Vol. 71, Issue 3, pp. 307-314.
Externí odkaz:
http://www.emeraldinsight.com/doi/10.1108/ACMM-11-2023-2918
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 69, Iss No 1, Pp 181-187 (2024)
In the present research, the Nb-Si-Ti-Cr-Al-Ta-Hf alloys with different Ho addition were prepared. Their microstructure, compressive properties and oxidation behaviors were investigated preliminarily. The results exhibit that the Nb-Si-Ti-Cr-Al-Ta-Hf
Externí odkaz:
https://doaj.org/article/f6e81b0fad5e46458d63f691aeff63c6
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 3898-3909 (2024)
The oxidation behavior of a medium carbon Cr–Mn–Si alloyed steel was investigated under a mold flux melt environment exposed to different high temperatures of 1175–1425 °C, and holding time of 5–85 min. The results showed that the thicknesse
Externí odkaz:
https://doaj.org/article/421c14cc2c2845d1bf42c5546af80336
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 1590-1600 (2024)
The effect of Mn–N on the oxidation behavior and microstructure evolution of a novel nickel-saving Fe–26Cr–4Ni-0.3C dual-phase heat-resistant cast steel at 900 °C was investigated. After 100 h of oxidation, the H–Mn–N steel (3.14 %Mn-0.232
Externí odkaz:
https://doaj.org/article/4e3d4c38acf94d1db99bfabc092b85c4
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 491-503 (2024)
The silicon-rich MoSi2 coating with a submicron surface roughness is deposited on Mo substrate by the hot-dip silicon (HDS) plating process. The microstructure, phase composition, and growth mechanism of the silicon-rich MoSi2 coating are characteriz
Externí odkaz:
https://doaj.org/article/c94b787189024dd39ea41013c47c513f
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Publikováno v:
Additive Manufacturing Letters, Vol 10, Iss , Pp 100228- (2024)
The oxidation behavior of copper-silver (Cu–Ag) alloy with the structure of triply periodic minimal surfaces (TPMS) processed by laser powder bed fusion (LPBF) was investigated at 300 °C and 600 °C. The lightweight TPMSs increase surface area, bo
Externí odkaz:
https://doaj.org/article/d79976dff5a4421fbca23936c8d4c772