Zobrazeno 1 - 10
of 13
pro vyhledávání: '"Oleg Sоbоl'"'
Publikováno v:
Eastern-European Journal of Enterprise Technologies, Vol 5, Iss 12 (107), Pp 6-15 (2020)
It was determined that in an electrolyte containing 1.75g/L KOH+1g/L Na2SiO3+2g/L NaAlO2, with an increase in current density from 15A/dm2to 50A/dm2, the phase composition of the coating changes. In the three-phase state (aluminum titanate, rutile, a
Autor:
Valeria Subbotinа, Oleg Sоbоl
Publikováno v:
Bulletin of the National Technical University «KhPI». Series: New solutions in modern technology. :10-21
Publikováno v:
Eastern-European Journal of Enterprise Technologies, Vol 4, Iss 12 (106), Pp 14-23 (2020)
The effect of electrolysis conditions with different electrolyte compositions on the growth kinetics, phase-structural state, and hardness of coatings obtained by microarc oxidation (MAO) on the D16 aluminum alloy (base – aluminum, main impurity Cu
Publikováno v:
Eastern-European Journal of Enterprise Technologies, Vol 2, Iss 12 (104), Pp 16-23 (2020)
The method of x-ray diffractometry was used to study the effect of the composition of two, three, four and five elemental niobium-based alloys on their phase-structural state, average crystallite size, and thermal expansion coefficient in the tempera
Publikováno v:
Collected scientific works of Ukrainian State University of Railway Transport. 191
In this study, the MAO technology was optimized in order to obtain a high development of coatings and their good adhesion to the substrate for the creation of a highly efficient heterogeneous catalyst on the oxide carrier of the Pt/Al2O3 system. Oxid
Publikováno v:
Eastern-European Journal of Enterprise Technologies, Vol 4, Iss 12 (94), Pp 49-55 (2018)
In the CVD method, samples of carbon condensates were obtained under special conditions (low substrate temperature and short growth times). The use of special technological conditions makes it possible to study the initial stages of growth of graphen
Autor:
Safwan M. Al-Qawabah, Valeria Subbotinа, Taha A. Tabaza, Oleg Sоbоl, Valery Belozerov, Anna Mahatilova, Ubeidulla F. Al-Qawabeha
Publikováno v:
Eastern-European Journal of Enterprise Technologies, Vol 1, Iss 12 (91), Pp 43-47 (2018)
Eastern-European Journal of Enterprise Technologies; Том 1, № 12 (91) (2018): Materials Science; 43-47
Восточно-Европейский журнал передовых технологий; Том 1, № 12 (91) (2018): Материаловедение; 43-47
Східно-Європейський журнал передових технологій; Том 1, № 12 (91) (2018): Матеріалознавство; 43-47
Eastern-European Journal of Enterprise Technologies; Том 1, № 12 (91) (2018): Materials Science; 43-47
Восточно-Европейский журнал передовых технологий; Том 1, № 12 (91) (2018): Материаловедение; 43-47
Східно-Європейський журнал передових технологій; Том 1, № 12 (91) (2018): Матеріалознавство; 43-47
The study provides research findings on the effect of current regimes in microplasma oxidation on the phase composition and the properties of oxide coatings on an aluminum alloy. To obtain oxide coatings, micro arc (microplasma) oxidation is carried
Autor:
Valery Belozerov, Taha A. Tabaza, Ubeidulla F. Al-Qawabeha, Anna Mahatilova, Oleg Sоbоl, Safwan Moh`d Al-Qawabah, Valeria Subbotinа
Publikováno v:
Eastern-European Journal of Enterprise Technologies. 5:52-57
Investigations have been performed on the effect of microplasma oxidation regimes in electrolytes with activating additives on the phasestructural state of coatings formed on the basis of aluminum. In microarc oxidation (MAO), the surface layer of
Autor:
Dmitriy Kovteba, V. A. Stolbovoy, Svitlana Shevchenko, Alexander Terletsky, Viktor Aleksandrov, Oleg Sоbоl, Tatyana Protasenko, A. A. Andreev
Publikováno v:
Eastern-European Journal of Enterprise Technologies. 3:31-36
The innovation technique of complex treatment for steels with the low temperature of tempering is proposed and tested in the course of present study. It includes nitriding in the vacuum gas discharge before hardening and tempering. In this case, duri
Autor:
Safwan Moh`d Al-Qawabah, Ubeidulla F. Al-Qawabeha, Alexander Subbotin, Valeria Subbotinа, Oleg Sоbоl, Taha A. Tabaza, Valery Belozerov
Publikováno v:
Східно-Європейський журнал передових технологій; Том 6, № 12 (102) (2019): Матеріалознавство; 6-13
Восточно-Европейский журнал передовых технологий; Том 6, № 12 (102) (2019): Материаловедение; 6-13
Eastern-European Journal of Enterprise Technologies; Том 6, № 12 (102) (2019): Materials Science; 6-13
Eastern-European Journal of Enterprise Technologies, Vol 6, Iss 12 (102), Pp 6-13 (2019)
Восточно-Европейский журнал передовых технологий; Том 6, № 12 (102) (2019): Материаловедение; 6-13
Eastern-European Journal of Enterprise Technologies; Том 6, № 12 (102) (2019): Materials Science; 6-13
Eastern-European Journal of Enterprise Technologies, Vol 6, Iss 12 (102), Pp 6-13 (2019)
Coatings with a thickness of about 100 μm were obtained by microarc oxidation of technically pure aluminum and aluminum alloyed with copper and zinc in an alkaline silicate electrolyte at a current density of ~20 A/dm2. The results of studying the s