Zobrazeno 1 - 5
of 5
pro vyhledávání: '"Oki Blatnik"'
Publikováno v:
Czech Journal of Food Sciences, Vol 30, Iss 1, Pp 1-8 (2012)
The influence of vibrations on the process of cheese cutting applied in order to reduce friction and the cutting force was studied. The forces needed to cut through the cheese samples were measured against the variations of the temperature, cutting s
Externí odkaz:
https://doaj.org/article/c2e4b55a79854fd8958588199b336668
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 221:1677-1684
Electrical discharge machining (EDM) is performed in the gap between the workpiece (usually the anode) and the electrode (usually the cathode). The gap is filled with a dielectric and the pulses generated by a special generator cause an electrical br
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5005e272bad6bfcc59aaa4ba7febfee4
https://doi.org/10.1243/09544054jem816
https://doi.org/10.1243/09544054jem816
Electrical discharge machining (EDM) is an important process in the field of micro machining. However, a number of issues remain to be solved in order to successfully implement it in an industrial environment. One of these issues is the processing ti
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5b4566b209bfa497f2bc1bdec6dda70d
https://doi.org/10.1016/b978-008045263-0/50045-3
https://doi.org/10.1016/b978-008045263-0/50045-3
Autor:
Bostjan Jurisevic, Mihael Junkar, Joško Valentinčič, Henri Paris, C. Masclet, Oki Blatnik, Henri Orbanic, Matthieu Museau
This contribution presents an investigation about the possibilities of using Water Jet (WJ) technology in combination with Micro Electrical Discharge Machining (MEDM) for tooling production in micro manufacturing. In the first phase the tool copper u
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::059b5f79f4ec3cbbb611573a28091262
https://doi.org/10.1016/b978-008045263-0/50088-x
https://doi.org/10.1016/b978-008045263-0/50088-x
Publikováno v:
International Journal of Materials and Product Technology. 29:344
To achieve high removal rate and low electrode wear when roughing by the sinking electrical discharge machining process (EDM), appropriate average surface power density is required in the gap between the workpiece and the electrode. Since machining s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d8bbad494c544b56093389a65d153833
https://doi.org/10.1504/ijmpt.2007.013128
https://doi.org/10.1504/ijmpt.2007.013128