Zobrazeno 1 - 10
of 85
pro vyhledávání: '"Niti KAMMUANG-LUE"'
Autor:
Ramnarong Wanison, Pattaramet Sripuangchai, Panuwat Phermkorn, Tongtrakan Soisuwan, Niti Kammuang-lue, Pradit Terdtoon, Nakorn Tippayawong, Yuttana Mona, Pana Suttakul, Phrut Sakulchangsatjatai
Publikováno v:
Results in Engineering, Vol 23, Iss , Pp 102763- (2024)
The urgency of addressing climate change has necessitated innovative and practical approaches to reducing greenhouse gas emissions. Cryogenic Carbon Capture (CCC) technology has emerged as a promising solution for capturing CO2 from industrial emissi
Externí odkaz:
https://doaj.org/article/de7ffc72e53944a399aa04c502ab5740
Publikováno v:
Energy Reports, Vol 8, Iss , Pp 302-308 (2022)
This research was aim to investigate the thermal characteristics of the rotating closed-loop pulsating heat pipe (RCLPHP) designed for integrating onto rotating-type energy storage devices. The thermal characteristics beginning from the start-up stat
Externí odkaz:
https://doaj.org/article/90561df508074231b8d0e80954952992
Publikováno v:
Energy Reports, Vol 8, Iss , Pp 336-341 (2022)
The objective of this study was to determine the suitable specific energy consumption (SEC) of cold storage rooms for chilled (0–10 °C) and frozen (≤-18 °C) cold stores in Thailand. A survey of refrigerated warehouses in Thailand was conducted
Externí odkaz:
https://doaj.org/article/28dd901f0a31482c8a8e71fe74cc3ad9
Publikováno v:
Energy Reports, Vol 8, Iss , Pp 731-737 (2022)
This experimental study aims to emphasize on thermal performance and temperature variation of the closed-loop pulsating heat pipe (CLPHP) affected by various adiabatic section lengths. A capillary copper tube has been bent to have 10 and 20 meanderin
Externí odkaz:
https://doaj.org/article/31139689b00f413d9e47a2c4d7121952
Publikováno v:
Energy Reports, Vol 8, Iss , Pp 1314-1320 (2022)
The objective of this study was to evaluate the suggested specific energy consumption (SEC) of refrigerated trucks in the cold chain in Thailand. Types of refrigerated trucks were classified following the regulations of the American Society of Heatin
Externí odkaz:
https://doaj.org/article/88c30138f7ed4ba28e5903a673c46469
Publikováno v:
Energy Reports, Vol 8, Iss , Pp 523-530 (2022)
The fuel and energy consumptions between different drive modes of the diesel hybrid electric bus were simulated and compared in this study. The simulated consumptions from two different hybrid modes were compared to the one obtained from the pure die
Externí odkaz:
https://doaj.org/article/d5a3bce4df3a48c6a0495d6bb52749e6
Autor:
Niti Kammuang-lue, Jirawat Boonjun
Publikováno v:
Energy Reports, Vol 7, Iss , Pp 3267-3272 (2021)
Externí odkaz:
https://doaj.org/article/d40e4b701fd14957957a36111a76b73e
Publikováno v:
Case Studies in Thermal Engineering, Vol 35, Iss , Pp 102139- (2022)
This research aims to design an optimal closed-loop pulsating heat pipe (CLPHP), which is applied as a heat transfer device to replace the thermosyphon in a commercial evacuated tube solar water heater system (ETSWH). It is evaluated by high thermal
Externí odkaz:
https://doaj.org/article/994bc23fbb004a02933645084514b2ba
Publikováno v:
Energy Reports, Vol 6, Iss , Pp 851-855 (2020)
The objective of this study was to establish the draft of the minimum energy performance standard (MEPS) and high energy performance standard (HEPS) for electric motorcycles in Thailand. Type approval of the electric motorcycles was referred to the R
Externí odkaz:
https://doaj.org/article/ed869802edca40ee8386fe87274f96fd
Publikováno v:
Case Studies in Thermal Engineering, Vol 27, Iss , Pp 101307- (2021)
A mathematical model that uses the concept of evaporation and condensation to explain the process of heat and mass transfer within the bent, flattened heat pipe has been established to predict its wall temperature and thermal resistance. When the hea
Externí odkaz:
https://doaj.org/article/9d7c8c9375c2434f8b4e9416131c9543