Zobrazeno 1 - 10
of 30
pro vyhledávání: '"Nickel-based filler metal"'
Autor:
Johannes L. Otto, Milena Penyaz, Anke Schmiedt-Kalenborn, Marina Knyazeva, Alexander Ivannikov, Boris Kalin, Frank Walther
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 5, Pp 10550-10558 (2020)
Whether in turbine components or exhaust gas heat exchangers, vacuum-brazed nickel-based joints are subjected to varying cyclical loads during their applications, often in corrosive environments. The microstructure of the brazed seam, which is determ
Externí odkaz:
https://doaj.org/article/403dc3704c204997a64f8c9a2425e47f
Publikováno v:
Entropy, Vol 21, Iss 3, p 283 (2019)
Infrared vacuum brazing of CoCrFeMnNi high entropy alloy (HEA) using BNi-2 and MBF601 fillers has been investigated. Both brazes show poor wettability at temperatures only 20 °C above their liquidus temperatures. However, the wettability of BNi-2 an
Externí odkaz:
https://doaj.org/article/bfae07d450fc4944b72fc997340912f5
Autor:
Catherine Tassin, F. Robaut, A. Akhatova, François Roch, Miguel Yescas, Marc Verdier, H.P. Van Landeghem
Publikováno v:
Materials Science and Engineering: A
Materials Science and Engineering: A, Elsevier, 2020, 788, pp.139592. ⟨10.1016/j.msea.2020.139592⟩
Materials Science and Engineering: A, Elsevier, 2020, 788, pp.139592. ⟨10.1016/j.msea.2020.139592⟩
International audience; Detailed characterization of the near fusion-boundary region of 18MND5 / Alloy 52 dissimilar metal weld joints was performed to investigate the effect of thermal aging on the microstructure and mechanical properties and to qua
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8b3163b169252229cfd4492a2a3a8b9b
https://hal.archives-ouvertes.fr/hal-02733004/document
https://hal.archives-ouvertes.fr/hal-02733004/document
Publikováno v:
Soldagem & Inspeção v.25 2020
Revista soldagem & inspeção
Associação Brasileira de Soldagem (ABS)
instacron:ABS
Soldagem & Inspeção, Volume: 25, Article number: e2508, Published: 11 MAY 2020
Soldagem & Inspeção, Vol 25 (2020)
Revista soldagem & inspeção
Associação Brasileira de Soldagem (ABS)
instacron:ABS
Soldagem & Inspeção, Volume: 25, Article number: e2508, Published: 11 MAY 2020
Soldagem & Inspeção, Vol 25 (2020)
Resumo: Aços inoxidáveis martensíticos são largamente utilizados pela indústria cuteleira, especialmente para produtos que tem contato com alimento. Nesta aplicação algumas propriedades são importantes, como resistência à corrosão, tenacid
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8f4777bd76ee14442793c6b908ae81cc
https://doi.org/10.1590/0104-9224/si25.08
https://doi.org/10.1590/0104-9224/si25.08
Autor:
Carvalho, Vicente da Rocha
Publikováno v:
Biblioteca Digital de Teses e Dissertações da UFRGS
Universidade Federal do Rio Grande do Sul (UFRGS)
instacron:UFRGS
Universidade Federal do Rio Grande do Sul (UFRGS)
instacron:UFRGS
Aços inoxidáveis martensíticos são largamente utilizados pela indústria cuteleira, especialmente para produtos que tem contato com alimento. Nesta aplicação algumas propriedades são importantes, como resistência à corrosão, tenacidade e es
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=od______3056::c00f482a73d4ffe306c81e5e74e1bc11
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Autor:
Lima, Cayo da Silva, Verdier, M., Robaut, F., Ghanbaja, J., Badinier, G., Marlaud, T., Tassin, C., van Landeghem, Hugo P.
The microstructural evolution of a dissimilar metal weld (DMW) obtained by narrow-gap gas tungsten arc welding (NG-GTAW) was investigated after it was subjected to a post-weld heat treatment (PWHT). The case studied here is a joint between low-alloy
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::846291385fa8ac66b00ee071e48adfd0
https://hal.archives-ouvertes.fr/hal-02382935/file/MatProcessTech_HAL.pdf
https://hal.archives-ouvertes.fr/hal-02382935/file/MatProcessTech_HAL.pdf
Publikováno v:
Entropy
Volume 21
Issue 3
Entropy, Vol 21, Iss 3, p 283 (2019)
Volume 21
Issue 3
Entropy, Vol 21, Iss 3, p 283 (2019)
Infrared vacuum brazing of CoCrFeMnNi high entropy alloy (HEA) using BNi-2 and MBF601 fillers has been investigated. Both brazes show poor wettability at temperatures only 20 °
C above their liquidus temperatures. However, the wettability of
C above their liquidus temperatures. However, the wettability of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b3a2b536a58ad2a7899ce37d41842b48
— Heat exchangers included in air conditioning systems for aircraft are produced by brazing stamped thin alloys sheets made of nickel-based alloys, Alloy 600 and Ni 201, or stainless steel, AISI 444. Separation metal sheets and locking bars of Allo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::990e3702c17b1effd34ecc075e5cee8f
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.