Zobrazeno 1 - 10
of 33
pro vyhledávání: '"Naomitsu Mizui"'
Autor:
Naomitsu Mizui
Publikováno v:
Journal of the Japan Society for Technology of Plasticity. 53:421-426
Publikováno v:
ISIJ International. 48:845-850
To clarify the thermodynamic stability of Ti4C2S2 and TiS in ULC Ti-added IF steels, extraction by potentiostatic electrolysis method and chemical analysis were conducted with ULC Ti-added IF steels containing various amounts of Mn and heated at vari
Publikováno v:
MATEC Web of Conferences, Vol 33, p 07002 (2015)
For automotive structural parts, hot stamping is being increasingly used because of the need for both higher fuel efficiency and crashworthiness. The yield strength of hot-stamped steel sheet is lower than that of water-quenched steel sheet. The micr
Publikováno v:
Tetsu-to-Hagane. 85:613-619
Publikováno v:
ISIJ International. 38:580-586
Effect of boron (B) on mechanical properties and recrystallization behavior of Ti-added IF steel sheets was studied. Recovery-, nucleation- and grain growth-rates were measured separately in order to clarify the effect of B on recovery and recrystall
Publikováno v:
Tetsu-to-Hagane. 82:1029-1034
Publikováno v:
ISIJ International. 34:17-23
Bake hardening properties of Ti-bearing ultra low carbon steels are affected by the precipitation behavior of TiN, MnS, TiS and Ti4C2S2. Thus the methods of isolation and determination of these precipitates have been developed and applied to the stud
Autor:
Nobusato Kojima, Naomitsu Mizui
Publikováno v:
ISIJ International. 34:123-131
For the weight reduction of automotive body, an ultra-low C Ti-added cold-rolled sheet steel with a tensile strength of 450 N/mm2 has been developed by means of adding P and Mn together. In order to develop the sheet steels of higher tensile strength
Effects of Prestrain on Precipitation Hardening of Cu added Ultra Low Carbon Cold Rolled Steel Sheet
Autor:
Ryujiro Onodera, Naomitsu Mizui
Publikováno v:
Tetsu-to-Hagane. 79:671-677
Autor:
Naomitsu Mizui, Kurt Lücke
Publikováno v:
Textures and Microstructures. 14:685-690