Zobrazeno 1 - 10
of 15
pro vyhledávání: '"Nancy C. LaBianca"'
Autor:
Rehan Choudhary, Roger R. Schmidt, M.B. Rothwell, Robert J. Polastre, Evan G. Colgan, Kenneth C. Marston, Raschid J. Bezama, Nancy C. LaBianca, Jamil A. Wakil, John H. Magerlein, Hilton T. Toy, Bruce K. Furman, Jeffrey A. Zitz, W. Graham, Michael A. Gaynes
Publikováno v:
IEEE Transactions on Components and Packaging Technologies. 30:218-225
The paper describes a practical implementation of a single-phase Si microchannel cooler designed for cooling very high power chips such as microprocessors. Through the use of multiple heat exchanger zones and optimized cooler fin designs, a unit ther
Autor:
Michael A. Gaynes, Robert J. Polastre, Bruce K. Furman, Raschid J. Bezama, Roger R. Schmidt, Nancy C. LaBianca, John H. Magerlein, Kenneth C. Marston, Evan G. Colgan
Publikováno v:
Journal of Heat Transfer. 129:1046-1051
High performance single-phase Si microchannel coolers have been designed and characterized in single chip modules in a laboratory environment using either water at 22°C or a fluorinated fluid at temperatures between 20 and −40°C as the coolant. C
Autor:
Hilton T. Toy, John H. Magerlein, Rehan Choudhary, Roger R. Schmidt, Jamil A. Wakil, Ken Marston, Robert J. Polastre, Mike Gaynes, Bruce K. Furman, Evan G. Colgan, Raschid J. Bezama, Nancy C. LaBianca
Publikováno v:
HVAC&R Research. 12:1031-1045
In this work, single-phase Si microchannel coolers have been designed and characterized for cooling very high power density chips in single-chip modules (SCMs) in a laboratory environment. The average heat transfer coefficient was determined for a wi
Autor:
Timothy J. Chainer, J. Horkans, Inna V. Babich, Lubomyr T. Romankiw, Philip L. Trouilloud, Emanuel I. Cooper, Nancy C. LaBianca, James A. Tornello, Christopher V. Jahnes, Suryanarayan G. Hegde, Keith T. Kwietniak, Sol Krongelb, Eugene J. O'Sullivan, John M. Cotte
Publikováno v:
IBM Journal of Research and Development. 42:681-694
The use of lithography and electroplating to fabricate variable-reluctance, nearly planar, integrated minimotors with 6-mm-diameter rotors on silicon wafers is described. The motors consist of six electroplated Permalloy® horseshoe-shaped cores that
Publikováno v:
IBM Journal of Research and Development. 41:81-94
Negative photoresists are materials that become insoluble in developing solutions when exposed to optical radiation. They were the first systems used to pattern semiconductor devices, and still comprise the largest segment of the photoresist industry
Autor:
Nancy C. LaBianca, Frank R. Libsch, Robert B. Laibowitz, Philip C. D. Hobbs, Punit P. Chiniwalla
Publikováno v:
Optics express. 15(25)
Near-infrared detectors based on metal-insulator-metal tunnel junctions integrated with planarized silicon nanowire waveguides are presented, which we believe to be the first of their kind. The junction is coupled to the waveguide via a thin-film met
Autor:
Michael A. Gaynes, Zhen Liu, Raj Peddi, Claudius Feger, Nancy C. LaBianca, Steven E. Steen, Mark Francis
Publikováno v:
2009 59th Electronic Components and Technology Conference.
The over bump applied resin (OBAR) process is a wafer-level underfill (WLUF) process in which a filled resin is applied over the bumps of a wafer and, dried. The wafer is diced into coated chips which are aligned and joined to a substrate resulting i
Autor:
Hidetoshi Nishiwaki, Kazushige Toriyama, Nancy C. LaBianca, Hirokazu Noma, Yasumitsu Orii, Toshihiko Nishio, Claudius Feger, Yukifumi Oyama, Ishida Mitsuya
Publikováno v:
2009 59th Electronic Components and Technology Conference.
PoP structures have been used widely in digital consumer electronics products such as digital still cameras and mobile phones. However, the final stack height from the top to the bottom package for these structures is higher than that of the current
Autor:
Evan G. Colgan, John H. Magerlein, Michael A. Gaynes, Kenneth C. Marston, Robert J. Polastre, Bruce K. Furman, Raschid J. Bezama, Nancy C. LaBianca, Roger R. Schmidt
Publikováno v:
ASME 4th International Conference on Nanochannels, Microchannels, and Minichannels, Parts A and B.
High performance single-phase Si microchannel coolers have been designed and characterized in single chip modules in a laboratory environment using either water at 22°C or a fluorinated fluid at temperatures between 20 and −40°C as the coolant. C
Autor:
James A. Tornello, W.J. Horkans, L.T. Romankiw, E.I. Cooper, Inna V. Babich, Philip L. Trouilloud, Timothy J. Chainer, Nancy C. LaBianca, Keith T. Kwietniak, Sol Krongelb, E.J.M. O'Sullivan, Christopher V. Jahnes, Suryanarayan G. Hegde
Publikováno v:
1997 IEEE International Magnetics Conference (INTERMAG'97).
Infroducfion: Small-size, highefficiency motors, fabricated by low cost batch fabrication techniques, are expected to have application in storage, automotive, medical and other fields. We describe a new approach to fabrication of an integrated experi