Zobrazeno 1 - 10
of 22
pro vyhledávání: '"Nahal Aliheidari"'
Publikováno v:
Scientific Reports, Vol 11, Iss 1, Pp 1-12 (2021)
Abstract Wearable sensing platforms have been rapidly advanced over recent years, thanks to numerous achievements in a variety of sensor fabrication techniques. However, the development of a flexible proximity sensor that can perform in a large range
Externí odkaz:
https://doaj.org/article/2679362fa4194edab7000863e8e31dfb
Publikováno v:
Journal of Composites Science, Vol 4, Iss 3, p 137 (2020)
Ternary composites of flexible thermoplastic polyurethane (TPU), lead zirconate titanate (PZT), and multiwalled carbon nanotubes (MWCNTs) with very high dielectric permittivity (εr) and low dielectric loss (tan δ) are reported. To assess the evolut
Externí odkaz:
https://doaj.org/article/1eccf7c8a9af4589a4df0bbae714cf77
Publikováno v:
Sensors, Vol 19, Iss 16, p 3587 (2019)
Electrospinning is a simple, low-cost and versatile method for fabricating submicron and nano size fibers. Due to their large surface area, high aspect ratio and porous structure, electrospun nanofibers can be employed in wide range of applications.
Externí odkaz:
https://doaj.org/article/c18501420176427fa977ca65017a5d15
Publikováno v:
Polymers, Vol 11, Iss 1, p 11 (2018)
Fabricating complex sensor platforms is still a challenge because conventional sensors are discrete, directional, and often not integrated within the system at the material level. Here, we report a facile method to fabricate bidirectional strain sens
Externí odkaz:
https://doaj.org/article/3336e68d59214a8c8d13d2e2904227d1
Autor:
Nahal Aliheidari, Amir Ameli
Publikováno v:
3D Printing ISBN: 9781003296676
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::64890049d557a22035b41833daecb53b
https://doi.org/10.1201/9781003296676-19
https://doi.org/10.1201/9781003296676-19
Autor:
Nahal Aliheidari, Amir Ameli
Publikováno v:
ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems.
Traditional conductive polymer nanocomposite (CPN) liquid sensors have been studied for many years. However, they suffer from low sensitivity due to insufficient surface area and access points to the solvent. With increasing demand for highperformanc
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6c0bf52fa3bc95c6e16684424e428f03
https://doi.org/10.1115/smasis2021-67659
https://doi.org/10.1115/smasis2021-67659
Publikováno v:
Scientific Reports
Scientific Reports, Vol 11, Iss 1, Pp 1-12 (2021)
Scientific Reports, Vol 11, Iss 1, Pp 1-12 (2021)
Wearable sensing platforms have been rapidly advanced over recent years, thanks to numerous achievements in a variety of sensor fabrication techniques. However, the development of a flexible proximity sensor that can perform in a large range of objec
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ba85cc472919d85e51e190ca133cb378
https://doi.org/10.1038/s41598-020-80071-0
https://doi.org/10.1038/s41598-020-80071-0
Publikováno v:
Materials & Design, Vol 156, Iss, Pp 351-361 (2018)
This study aims to establish the relationships between the process parameters, mesostructural features (interlayer neck and void sizes), and the fracture resistance of 3D printed parts. The proposed method enables the decoupling of bond quality and m
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::4f2d5484d3e34d19c37fe3b392826967
https://doi.org/10.1016/j.matdes.2018.07.001
https://doi.org/10.1016/j.matdes.2018.07.001
Publikováno v:
Materials & Design, Vol 131, Iss, Pp 394-401 (2017)
3D-printable, flexible, and conductive thermoplastic-based material was successfully developed for strain sensing applications. Thermoplastic polyurethane/multiwalled carbon nanotube (TPU/MWCNT) were compounded, their filaments were extruded, and the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::2aeb2a526ac9e813ae5d27f1a26d34ed
http://www.sciencedirect.com/science/article/pii/S0264127517305944
http://www.sciencedirect.com/science/article/pii/S0264127517305944
Publikováno v:
Polymer Testing. 60:94-101
A method is presented to characterize the fracture resistance and interlayer adhesion of fused deposition modeling (FDM) 3D printed materials. Double cantilever beam (DCB) specimens of acrylonitrile butadiene styrene (ABS) were designed and printed w
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::150cca95d66c8c6eaa5b30be39cfaced
https://doi.org/10.1016/j.polymertesting.2017.03.016
https://doi.org/10.1016/j.polymertesting.2017.03.016