Zobrazeno 1 - 10
of 28
pro vyhledávání: '"Nabihah Sallih"'
Autor:
Imran Mir Chohan, Azlan Ahmad, Nabihah Sallih, Naraindas Bheel, Waleligne Molla Salilew, Abdulrazak H. Almaliki
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-18 (2024)
Abstract This research aims to investigate the effects of seawater parameters like salinity, pH, and temperature on the external corrosion behaviour and microhardness of offshore oil and gas carbon steel pipes. The immersion tests were performed for
Externí odkaz:
https://doaj.org/article/4a79e5a2c80340de9dc048845862d6c9
Autor:
Roshan Vijay Marode, Tamiru Alemu Lemma, Nabihah Sallih, Srinivasa Rao Pedapati, Mokhtar Awang, Adeel Hassan
Publikováno v:
Journal of Magnesium and Alloys, Vol 12, Iss 6, Pp 2091-2146 (2024)
Rising concerns about climate change drive the demand for lightweight components. Magnesium (Mg) alloys are highly valued for their low weight, making them increasingly important in various industries. Researchers focusing on enhancing the characteri
Externí odkaz:
https://doaj.org/article/c79f53f942524aa69591e8848a43c720
Autor:
Murniwati Anwar, Faizal Mustapha, Mohd Na’im Abdullah, Mazli Mustapha, Nabihah Sallih, Azlan Ahmad, Siti Zubaidah Mat Daud
Publikováno v:
Sensors, Vol 24, Iss 16, p 5225 (2024)
The detection of impact and depth defects in Glass Fiber Reinforced Polymer (GFRP) composites has been extensively studied to develop effective, reliable, and cost-efficient assessment methods through various Non-Destructive Testing (NDT) techniques.
Externí odkaz:
https://doaj.org/article/6a4133c886b64465aa8771458e6ef0d5
Autor:
Imran Mir Chohan, Azlan Ahmad, Nabihah Sallih, Naraindas Bheel, Mohsin Ali, Ahmed Farouk Deifalla
Publikováno v:
Results in Engineering, Vol 19, Iss , Pp 101325- (2023)
Environmentally sustainable development needs techniques and tools to quantify and compare human activities environmental impacts for numerous products and services. However, providing products and services to society contributes to a variety of envi
Externí odkaz:
https://doaj.org/article/cbe04a8daf944615abde0c04565a6706
Publikováno v:
Applied Sciences, Vol 13, Iss 2, p 1225 (2023)
Gas–liquid two-phase flow is very common in industrial pipelines. Flow regime identification is the first step to design, analyze, and operate the gas–liquid system successfully. The purpose of this study is to develop a methodology for identific
Externí odkaz:
https://doaj.org/article/f12709cdb1f24182ad3a2983a42ff684
Publikováno v:
Applied Sciences, Vol 12, Iss 17, p 8406 (2022)
Two-phase flow is commonly encountered in various engineering systems. Momentum fluctuation in two-phase flow can create undesirable and destructive vibrations. These vibrations are known as flow-induced vibrations, which are a fundamental phenomenon
Externí odkaz:
https://doaj.org/article/22360144215a4823b9900cc7961edb28
Autor:
Nurul Husna Othman, Mazli Mustapha, Nabihah Sallih, Azlan Ahmad, Faizal Mustapha, Mokhtar Che Ismail
Publikováno v:
Materials, Vol 15, Iss 10, p 3445 (2022)
Solution mixing, which is one of the standard methods of producing Graphene−based Nanocomposites (GPC) may not be as efficient as it is expected due to the presence of residual solvent in the cured product. Therefore, the influence of including ace
Externí odkaz:
https://doaj.org/article/c1bc97505d58451abfbb118ab538db39
Autor:
Mohd Na’im Abdullah, Mazli Mustapha, Nabihah Sallih, Azlan Ahmad, Faizal Mustapha, Ayu Dahliyanti
Publikováno v:
Materials, Vol 14, Iss 13, p 3440 (2021)
The utilisation of rice husk ash (RHA) as an aluminosilicate source in fire-resistant coating could reduce environmental pollution and can turn agricultural waste into industrial wealth. The overall objective of this research is to develop a rice-hus
Externí odkaz:
https://doaj.org/article/fc8b9447567f40a89d30c835c753ad5c
Autor:
Haizum Aimi Zaharin, Ahmad Majdi Abdul Rani, Farooq I. Azam, Turnad Lenggo Ginta, Nabihah Sallih, Azlan Ahmad, Nurul Azhani Yunus, Tun Zainal Azni Zulkifli
Publikováno v:
Materials, Vol 11, Iss 12, p 2402 (2018)
Porous metal structures have emerged as a promising solution in repairing and replacing damaged bone in biomedical applications. With the advent of additive manufacturing technology, fabrication of porous scaffold architecture of different unit cell
Externí odkaz:
https://doaj.org/article/1a1062b5a6ef4d3e9f62572581ff590c
Publikováno v:
CFD Letters. 14:68-78
Two-phase flow is of great importance in various industrial processes. A characteristic feature of two-phase flow is that it can acquire various spatial distribution of phases to form different flow patterns/regimes. The knowledge of flow regime is v