Zobrazeno 1 - 10
of 469
pro vyhledávání: '"NAIZABEKOV, A."'
Autor:
Sergey Lezhnev, Abdrakhman Naizabekov, Andrey Tolkushkin, Evgeniy Panin, Dmitry Kuis, Alexandr Arbuz, Pavel Tsyba, Elena Shyraeva
Publikováno v:
Modelling, Vol 5, Iss 3, Pp 1101-1115 (2024)
The purpose of this work is a comparative analysis of the workpiece shape, and parameters of the stress-strain state during deformation on two radial-shear rolling mills with different roll configurations to determine the most suitable scheme for obt
Externí odkaz:
https://doaj.org/article/95629ee2a8974006b8dc115aa4af50d7
Autor:
Tolkushkin, Andrey1, Naizabekov, Abdrakhman1, Panin, Evgeniy2 cooper802@mail.ru, Yordanova, Rozina3, Shvarts, Danil4, Tsyba, Pavel5, Volokitina, Irina2, Rovin, Sergey6, Esbolat, Aibol2
Publikováno v:
Journal of Chemical Technology & Metallurgy. 2024, Vol. 59 Issue 5, p1209-1214. 6p.
Autor:
Yachikov, Igor1, Naizabekov, Abdrakhman2, Lezhnev, Sergey1 sergey_legnev@mail.ru, Myasnikova, Alena1, Trofimov, Evgeny1, Panin, Evgeniy1, Samodurova, Marina1
Publikováno v:
Journal of Chemical Technology & Metallurgy. 2024, Vol. 59 Issue 5, p1215-1226. 12p.
Autor:
Naseri, Majid1 naserim@susu.ru, Naizabekov, Abdrakhman2, Mikhailov, Dmitry1, Legnev, Sergey1 sergey_legnev@mail.ru, Shaburova, Nataliya1, Pellenen, Anatoliy1, Bodrov, Evgenii1, Samodurova, Marina1, Trofimov, Evgeny1, Panin, Evgeniy1
Publikováno v:
Journal of Chemical Technology & Metallurgy. 2024, Vol. 59 Issue 5, p1231-1240. 10p.
Publikováno v:
Results in Engineering, Vol 24, Iss , Pp 103153- (2024)
The paper presents the results of experimental studies of a new combined method of severe plastic deformation for the production of bolted joints, consisting of stages of radial shear rolling followed by twisting in a screw matrix. A 30 mm diameter b
Externí odkaz:
https://doaj.org/article/125499a28da54d81922b1a27c0cc7530
Autor:
Evgeniy Panin, Irina Volokitina, Andrey Volokitin, Abdrakhman Naizabekov, Gulzhainat Akhmetova, Sergey Lezhnev, Andrey Tolkushkin, Aibol Esbolat
Publikováno v:
Tehnički Vjesnik, Vol 31, Iss 6, Pp 1805-1814 (2024)
In this work, finite element simulation of the rolling-pressing process with horizontal and vertical rolls was carried out. To analyze the efficiency of metal processing, the main parameters of the stress-strain state were considered: equivalent stra
Externí odkaz:
https://doaj.org/article/6fb192a1b67844baaa8dc2621334be8d
Publikováno v:
Metalurgija, Vol 63, Iss 2, Pp 283-286 (2024)
The article investigates the effect of combined thermomechanical processing, including pre-heat treatment and radial-shear rolling on the brass microstructure evolution and the microhardness change. The microstructure analysis of heat-treated samples
Externí odkaz:
https://doaj.org/article/8ea4dff8c95847e1b78362b2c1b2f22f
Publikováno v:
Metalurgija, Vol 63, Iss 2, Pp 279-282 (2024)
The paper presents the experimental study of the contact wear of 5KHV2S steel after surface modification. It is shown that without hardening of the surface layer, 5KHV2S steel is capable of satisfactory operation when a pulsating contact stress of 97
Externí odkaz:
https://doaj.org/article/50f10f5bf67e452488ba97cc7d383cb5
Publikováno v:
Успехи физики металлов, Vol 24, Iss 4, Pp 764-791 (2023)
The article presents methods for improving the quality of forgings and workpieces obtained by forging by intensifying shear or alternating strain in the bulk of the deformed metal. To increase the metal processing due to shear or alternating strain d
Externí odkaz:
https://doaj.org/article/070823c441ef4dfb8fc8f3981a07da18
Autor:
Chigirinsky, Valery1, Naizabekov, Abdrakhman1, Lezhnev, Sergey1 sergey_legnev@mail.ru, Kuzmin, Sergey1, Panin, Evgeniy2, Tolkushkin, Andrey1, Volokitina, Irina2, Yordanova, Rozina3, Knapinski, Marcin4
Publikováno v:
Journal of Chemical Technology & Metallurgy. 2024, Vol. 59 Issue 4, p993-1002. 10p.