Zobrazeno 1 - 10
of 30
pro vyhledávání: '"Murco Obucina"'
Autor:
Murčo Obućina, Goran Turk, Ejub Džaferović, Jože Resnik, Goran Turk, Ejub Džaferović, Jože Resnik
Publikováno v:
Drvna Industrija, Vol 64, Iss 1, Pp 33-38 (2013)
This paper presents the analysis of the influence of conventional hot (CH) and high frequency (HF) gluing on relevant physical and mechanical properties of Laminated Veneer Lumber (LVL) made from beech peeled veneer with the thickness of 2.1 mm. Stud
Externí odkaz:
https://doaj.org/article/34b95815ba964e26a088db39afb4f687
Publikováno v:
Journal of Ecological Engineering, Vol 25, Iss 3, Pp 1-11 (2024)
This paper explores the possibility of using recycled seashells from marine coasts of the Mali Ston Bay in Dubrovnik-Neretva County, Croatia, to create a novel bio material derived from waste seashells. In this research, two types of waste seashells,
Externí odkaz:
https://doaj.org/article/7804fae515e2420e9939547754b1962c
Publikováno v:
Drvna Industrija, Vol 74, Iss 1, Pp 3-11 (2023)
This paper investigated the bending moment of chair base joints. The ultimate bending moments (maximum moment), calculated on the base of the measured maximum applied loads (maximum force), were compared for the front leg and rear leg joints of a cha
Externí odkaz:
https://doaj.org/article/3db5dfefa77b46d59b66fb9d0b7a0a3e
Publikováno v:
Polymers, Vol 13, Iss 19, p 3276 (2021)
The aim of this research is to determine the relaxation and creep modulus of 3D printed materials, and the numerical research is based on the finite volume method. The basic material for determining these characteristics is ABS (acrylonitrile butadie
Externí odkaz:
https://doaj.org/article/154b7f1685c84ff19cf7e6b17d1be9e1
Publikováno v:
Drvna industrija
Volume 74
Issue 1
Drvna industrija. Znanstveno stručni časopis za pitanja drvne tehnologije, vol. 74, no. 1, pp. 3-11, 2023.
Volume 74
Issue 1
Drvna industrija. Znanstveno stručni časopis za pitanja drvne tehnologije, vol. 74, no. 1, pp. 3-11, 2023.
This paper investigated the bending moment of chair base joints. The ultimate bending moments (maximum moment), calculated on the base of the measured maximum applied loads (maximum force), were compared for the front leg and rear leg joints of a cha
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::2b58158f56f08ed8bf9d8df9bc2333ef
https://doi.org/10.5552/drvind.2023.0004
https://doi.org/10.5552/drvind.2023.0004
Publikováno v:
Wood material science & engineering, vol. 18, no. 3, 2023.
Wood material science & engineering, str., Vol., no. , 2022
COBISS-ID: 522172953
Wood material science & engineering, str.
COBISS-ID: 522172953
In this study, 3D-printed connectors to replace the typical L-shaped joints in the construction of a chair were developed, tested and numerically analysed. Different connectors were designed and manufactured with a fused deposition modelling (FDM) 3D
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::80afb518efddff4907e815061a36cbf7
https://doi.org/10.1080/17480272.2022.2086065
https://doi.org/10.1080/17480272.2022.2086065
Publikováno v:
BioResources. 15:8249-8267
This paper investigated the effect of the tenon length on the strength and stiffness of the standard mortise and tenon joints, as well of the double mortise and tenon joints, that were bonded by poly(vinyl acetate) (PVAc) and polyurethane (PU) glues.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::16f24c56cc756aea80b48b522a6d0d06
https://doi.org/10.15376/biores.15.4.8249-8267
https://doi.org/10.15376/biores.15.4.8249-8267
Publikováno v:
DAAAM Proceedings ISBN: 9783902734365
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9e747be0a5a7e7c857f0e73abb6718a9
https://doi.org/10.2507/33rd.daaam.proceedings.014
https://doi.org/10.2507/33rd.daaam.proceedings.014
Wood extension is a technological process that has enabled better use of solid wood, reaching longer element lengths and greater stability of solid wood shapes. The paper examines the influence of humidity and adhesive types on the bending strength a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::7f16bf6a32d076f5ebb292a9da4a1a19
https://doi.org/10.2507/32nd.daaam.proceedings.038
https://doi.org/10.2507/32nd.daaam.proceedings.038
Publikováno v:
New Technologies, Development and Application IV ISBN: 9783030752743
It is not usual practice but sometimes without previous agreement, to sawmills sometimes are delivered logs which do not fit regulations for standard saw logs. Often those logs are below standard quality or dimensions. Namely, sawmills compensate the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9d4303d6622f0ab27aedc4c6bac9628b
https://doi.org/10.1007/978-3-030-75275-0_44
https://doi.org/10.1007/978-3-030-75275-0_44