Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Muh Wahyu Syabani"'
Autor:
Muh Wahyu Syabani, Iswahyuni Iswahyuni, Warmiati Warmiati, Kutut Aji Prayitno, Henny Saraswati, Rahmandhika Firdauzha Hary Hernandha
Publikováno v:
Indonesian Journal of Halal Research, Vol 5, Iss 2, Pp 67-76 (2023)
The halal certification of products holds significant importance for Muslim consumers, necessitating the development of reliable techniques for identifying leather products made from raw materials. This study employed rapid and accurate analytical me
Externí odkaz:
https://doaj.org/article/81df4012d2da4930b2b07a4a7edb4175
Publikováno v:
Communications in Science and Technology, Vol 8, Iss 1, Pp 75-81 (2023)
The present study investigates the effects of nanoparticle geothermal silica (NGS) on the mechanical properties and vulcanization characteristics of rubber compounds with various filler loadings. The rubber compounds were filled with 0, 20, 30, and 4
Externí odkaz:
https://doaj.org/article/537764acce3c47f89f0945d0d59a7f6f
Effect of UV Aging on Physical Properties of Vulcanized Rubber with the Addition of Reclaimed Rubber
Publikováno v:
Logic, Vol 19, Iss 3, Pp 155-161 (2019)
Rubber solid waste amount increased continuosly and caused environmental problem since it is very difficult to be naturally degraded. Therefore, the interest of using rubber waste as raw material for new rubber product is increased. Reclaimed rubber
Externí odkaz:
https://doaj.org/article/c443d0810a6e470bbaa599f2f22090f6
Publikováno v:
Jurnal Teknologi. 10:36-47
Synthetic leather is generally made using polyvinyl chloride or polyurethane resins by coating method. The balance between quality and production costs of the final product is influenced by the selection of the right material composition. Polyvinyl c
Publikováno v:
Berkala Penelitian Teknologi Kulit, Sepatu, dan Produk Kulit. 21:118-128
Kulit sintetis pada saat ini semakin banyak digunakan karena memiliki kelebihan proses yang lebih mudah dan biaya produksi rendah. Pembuatannya bahan ini secara umum melibatkan proses pelapisan dan pemanasan. Penelitian ini bertujuan untuk mengetahui
Autor:
null Muh. Wahyu Syabani, null Mertza Fitra Agustian, null Wisnu Pambudi, null Suharyanto, null Warmiati, null Muhammad Ikhwan
Publikováno v:
Berkala Penelitian Teknologi Kulit, Sepatu, dan Produk Kulit. 21:129-141
Karet jenis poliisoprena, styrene butadiene rubber dan polybutadiene rubber dapat menghasilkan produk karet dengan karakteristik mekanik yang baik dan berbiaya rendah. Akan tetapi, jenis karet tersebut tidak memiliki ketahanan terhadap minyak yang ba
Publikováno v:
Key Engineering Materials. 849:78-83
The main components of artificial leather were polymer, plasticizer, stabilizer, and filler. Silica is one of the commons reinforcing filler for many composites. Meanwhile, amorphous silica is usually precipitate in geothermal power plants and become
Publikováno v:
INDONESIAN JOURNAL OF CHEMICAL RESEARCH; VOLUME 4, ISSUE 1, 2019; 1-8
Katalis CaO dari abu cangkang kelomang (Paguroidea) telah berhasil dibuat melalui proses kalsinasi pada suhu 900°C selama 4 jam. Variasi waktu kalsinasi 2, 3, dan 4 jam dilakukan untuk mempelajari tentang perubahan fasa sampel. Hasil difraksi sinar-
Publikováno v:
Heliyon, Vol 6, Iss 11, Pp e05280-(2020)
Heliyon
Heliyon
Plastics based on low-density polyethylene (LDPE) blends generally have limited miscibility, and it is difficult to obtain a homogeneous blend. Although they show excellent properties, their thermal degradation rate is a concern. This work aims to re
Publikováno v:
THE 5TH INTERNATIONAL CONFERENCE ON INDUSTRIAL, MECHANICAL, ELECTRICAL, AND CHEMICAL ENGINEERING 2019 (ICIMECE 2019).
Silica from geothermal power plant waste was studied as a filler for rubber compound. Utilization of geothermal silica will be beneficial both to the rubber and power industries. Rubber industries got benefit from its low cost and the potential as re