Zobrazeno 1 - 10
of 54
pro vyhledávání: '"Monis Luqman"'
Autor:
Monis Luqman, Yahia Ali, Moustafa Mahmoud Y. Zaghloul, Faheem A. Sheikh, Vincent Chan, Abdalla Abdal-hay
Publikováno v:
Journal of Materials Research and Technology, Vol 24, Iss , Pp 7338-7365 (2023)
Along the way, investigations over the past few years have focused on developing new Zn-based alloys as future materials for medical implants due to the poor mechanical and degradation properties. Effective grain size control is a fundamental propert
Externí odkaz:
https://doaj.org/article/7363f4d833d346c69bfb6575ee3c91db
Autor:
Nabeel H. Alharthi, Saud M. Almotairy, Hamad F. Alharbi, M. Shahinuzzaman, Monis Luqman, K. Sobayel
Publikováno v:
Journal of Materials Research and Technology, Vol 15, Iss , Pp 846-854 (2021)
The doping of two-dimensional materials provides them with tunable physical properties and broadens their application. In this study, the doping of tungsten disulfide with metallic Sn atoms via a co-sputtering technique was demonstrated. In particul
Externí odkaz:
https://doaj.org/article/a9fc10f9226847af9d02ce84a5d3a265
Autor:
Mostafa R. Abukhadra, Mohamed Gameel Basyouny, Ahmed M. El-Sherbeeny, Mohammed A. El-Meligy, Monis Luqman
Publikováno v:
ACS Omega, Vol 6, Iss 2, Pp 1556-1567 (2021)
Externí odkaz:
https://doaj.org/article/e2acc629467648909d5b1df873b83de3
Autor:
Adel T. Abbas, Mohamed Abubakr, Muhammed A. Hassan, Monis Luqman, Mahmoud S. Soliman, Hussien Hegab
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 6, Pp 14568-14581 (2020)
Stainless steel 316 has wide applications in different industries due to its distinct mechanical and corrosion resistance properties. In this paper, a new adaptive design approach is presented and discussed to optimize the machining process when face
Externí odkaz:
https://doaj.org/article/1f5e7473059740aa9aa2e7228b2d8ab2
Autor:
Partha Pratim Dey, Pranabananda Modak, P.S. Banerjee, Debalay Chakrabarti, Asiful H. Seikh, Hany S. Abdo, Monis Luqman, Manojit Ghosh
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 3, Pp 4788-4805 (2020)
Interstitial-free (IF) steel specimens were coated by hot-dip aluminizing process bearing bath composition as Al-6.9% Si-1.4% Mg and bath temperature at 800 °C. Dipping time varied for 0.5, 1, 3 and 6 min. The objective of the present study is to co
Externí odkaz:
https://doaj.org/article/ddcab7dc119a41abb9c95741e0bb7a37
Autor:
Adel Taha Abbas, Mohamed Abubakr, Ahmed Elkaseer, Magdy M. El Rayes, Monis Luqman Mohammed, Hussien Hegab
Publikováno v:
IEEE Access, Vol 8, Pp 159206-159219 (2020)
The continuous pursue of sustainable manufacturing is motivating the utilization of new advanced technology, especially for hard to cut materials. In this study, an adaptive approach for optimization of machining process of AISI 4340 using wiper inse
Externí odkaz:
https://doaj.org/article/825c92fb771f4f488250235184fe2c74
Publikováno v:
IEEE Access, Vol 8, Pp 202755-202764 (2020)
Nowadays, robotics plays a vital role in medical applications, especially in dentistry, where robots can track oral hygiene and perform dental surgeries. Dental implant replacement is one of the most challenging issues in dental surgery; quality proc
Externí odkaz:
https://doaj.org/article/8bb80531565946608aa737971222d0c6
Publikováno v:
IEEE Access, Vol 8, Pp 190722-190733 (2020)
Anatomically, oral cavity and central nervous system have a close relationship; the mouth and face are the location for 30-40% of the body's sensory and motor nerves. The identification of orofacial manifestations of neurological disorders is usually
Externí odkaz:
https://doaj.org/article/7be4db7a638d4bc5bacc27f30ed29756
Autor:
Saud M. Almotairy, El-Sayed M. Sherif, Nabeel H. Alharthi, Hany S. Abdo, Hamad F. Alharbi, Monis Luqman
Publikováno v:
Crystals, Vol 11, Iss 10, p 1231 (2021)
In this work, the fabrication of three Al-2wt.% SiC nanocomposites processed by novel milling route was carried out. The beneficial influence of milling route on the corrosion passivation of the new fabricated composites was investigated. The cyclic
Externí odkaz:
https://doaj.org/article/4da8adf269f342b68070a9e360c8d84d
Autor:
M.S Jamal, S.A. Shahahmadi, P. Chelvanathan, Hamad F. Alharbi, Mohammad R. Karim, Mushtaq Ahmad Dar, Monis Luqman, Nabeel H. Alharthi, Yahya S. Al-Harthi, M. Aminuzzaman, Nilofar Asim, K. Sopian, S.K. Tiong, Nowshad Amin, Md. Akhtaruzzaman
Publikováno v:
Results in Physics, Vol 14, Iss , Pp - (2019)
In this study, nickel oxide (NiO) thin films were deposited on soda lime glass using radio-frequency magnetron sputtering at different growth (substrate) temperatures ranging from room temperature (RT) to 400 °C. The effects of substrate temperature
Externí odkaz:
https://doaj.org/article/178045a82c8043da8ce964594d2233cc