Zobrazeno 1 - 10
of 164
pro vyhledávání: '"Mola R."'
Publikováno v:
Archives of Foundry Engineering, Vol 17, Iss 4, Pp 195-199 (2017)
The modified surface layers of Mg enriched with Al and Si were fabricated by thermochemical treatment. The substrate material in contact with an Al + 20 wt.% Si powder mixture was heated to 445°C for 40 or 60 min. The microstructure of the layers wa
Externí odkaz:
https://doaj.org/article/539401d1add740c3922651e6ebd1a990
Publikováno v:
Archives of Foundry Engineering, Vol 17, Iss 1, Pp 202-206 (2017)
This paper discusses the joining of AZ91 magnesium alloy with AlSi17 aluminium alloy by compound casting. Molten AZ91 was cast at 650°C onto a solid AlSi17 insert placed in a steel mould under normal atmospheric conditions. Before casting, the mould
Externí odkaz:
https://doaj.org/article/ed58fcfe7ef24184bacfbac49653c457
Publikováno v:
Archives of Foundry Engineering, Vol 16, Iss 1, Pp 112-116 (2016)
Al-enriched layer was formed on a magnesium substrate with use of casting. The magnesium melt was cast into a steel mould with an aluminium insert placed inside. Different conditions of the casting process were applied. The reaction between the molte
Externí odkaz:
https://doaj.org/article/26bc21a5989d4340a96453a135667629
Publikováno v:
Archives of Metallurgy and Materials, Vol 60, Iss 4, Pp 2821-2826 (2015)
The paper presents the results of the experimental study of the three-layer Al-Mg-Al sheets rolling process by the ARB method. The tests carried out were limited to single-pass symmetric and asymmetric rolling processes. An Al-Mg-Al package with an i
Externí odkaz:
https://doaj.org/article/14b613af017a4d1ab7c8c4708a8c1e58
Publikováno v:
Archives of Metallurgy and Materials, Vol 60, Iss 4, Pp 3017-3022 (2015)
The paper present the results of physical simulation of the deformation of the two-layered AZ31/eutectic material using the Gleeble 3800 metallurgical processes simulator. The eutectic layer was produced on the AZ31 substrate using thermochemical tre
Externí odkaz:
https://doaj.org/article/17137646d93e4c63a4db796b59900d7f
Publikováno v:
In Archives of Civil and Mechanical Engineering September 2018 18(4):1401-1409
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Autor:
MOLA, R.1
Publikováno v:
Archives of Metallurgy & Materials. Dec2014, Vol. 59 Issue 4, p1409-1412. 4p.
Publikováno v:
Metalurgija. 2016, Vol. 55 Issue 4, p625-627. 3p.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.