Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Mohammed Baba Ndaliman"'
Publikováno v:
International Journal of Engineering Materials and Manufacture, Vol 1, Iss 1 (2016)
The aim of this study is to investigate the influence of stirring speed on stir casting synthesis of 15 wt% silicon carbide particle reinforced aluminium alloy (SiCp-6061 Al) composite. The composite samples were produced at different stirring speed
Externí odkaz:
https://doaj.org/article/afdc345c805a46739ea0a9fc8226215e
Publikováno v:
International Journal of Engineering Materials and Manufacture, Vol 5, Iss 2 (2020)
Over many years, asbestos has been used as reinforcement material in the production of brake pads production but it has lost favour due to its carcinogenic nature, as a result, there is need to investigate other possible substitute which can offer si
Autor:
J. Abutu, S.A. Lawal, Mohammed Baba Ndaliman, Imtiaz Ahmed Choudhury, Oyewole Adedipe, R. A. Lafia-Araga
Publikováno v:
Engineering Science and Technology, an International Journal, Vol 21, Iss 4, Pp 787-797 (2018)
Over the years, asbestos was used as reinforcement material in brake pads production. However, due to its carcinogenic nature, it has lost its favor and there is need to find an alternative material. In this study, brake pads were produced from local
Autor:
Zakaria Mohd Zain, Mohammed Baba Ndaliman, Ummu Atiqah Khairiyah binti Mohamad, Ahsan Ali Khan, Nurul Farhana binti Sulong
Publikováno v:
Advanced Materials Research. 1115:24-28
Electrical discharge machining (EDM) is one of the most commonly used technique to machine very hard materials. Materials like hardened tool steels, titanium and its alloys and difficult-to-machine materials can be easily processed with EDM. The mach
Autor:
Mohammad Yeakub Ali, K. C. Bala, Adebisi Adetayo Abdulmumin, Ahsan Ali Khan, Umma Abdullahi, Mohammed Baba Ndaliman
Publikováno v:
Advanced Materials Research. 1115:213-216
Titanium (Ti-6Al-4V) alloy is very attractive for many applications due to its high strength-to-weight ratio and high corrosion resistance. Even then, with these attractive properties, it has poor shear strength and surface wear properties. This stud
Publikováno v:
2017 8th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT).
This paper presents the investigation of compounds / phases formed during the Electrical Discharge Machining (EDM) of titanium alloy (Ti-6Al-4V) with Cu-TaC compact electrode using urea dielectric fluid. It is proposed that the materials involved in
The variables that affect the use of boring process in the workshop floor and its application in the building of tunnel were reviewed in this chapter. It was observed that cutting fluids and its method of application in the workshop were never taken
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d22eec583e2549cae0caa2eb81d7d815
https://doi.org/10.1016/b978-0-12-803581-8.09148-7
https://doi.org/10.1016/b978-0-12-803581-8.09148-7
Autor:
S.A. Lawal, Mohammed Baba Ndaliman
Surface characteristics, which include surface roughness, surface hardness, and corrosion resistance of surface of machining products, have received attention in recent years. Research on how to improve the surface characteristics by electro-discharg
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::71a083c9341b6897b801e1ea114607b4
https://doi.org/10.1016/b978-0-12-803581-8.09184-0
https://doi.org/10.1016/b978-0-12-803581-8.09184-0
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 228:3374-3380
Powder-mixed electrical discharge machining (PMEDM) is the technique of using dielectric fluid mixed with various types of powders to improve the machined surface output. This process is fast gaining prominence in electrical discharge machining (EDM)
Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227:1310-1316
Dielectric fluid is one of the major components of electrical discharge machining. In this article, the influence of two dielectric fluids on the surface properties of workpiece was investigated. Machining was conducted on the titanium alloy (Ti-6Al-